HEINNER HBS-BRW180BB Bathroom Scale User Manual

: June 3, 2024
: HEINNER

Table of Contents

HEINNER HBS-BRW180BB Bathroom Scale
INTRODUCTION
PACKAGE CONTENTS
SAFETY MEASURES
USING THE APPLIANCE
BATTERY
TECHNICAL FICHE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HEINNER HBS-BRW180BB Bathroom Scale

Bathroom scale
Capacity: 180kg
Battery: 2 X 1.5 AAA

Thank you for choosing this product!

INTRODUCTION

Please read this instruction manual carefully before using it and keep it for later information This manual is conceived for offering you all of the necessary info regarding the installation, use and maintenance of the machine. For a correctly and safely use of the machine, please, read this manual before installation and use.

PACKAGE CONTENTS

Bathroom scale
Instruction Manual
Warranty card

SAFETY MEASURES

The glass platform will be slippery when it is wet. Keep it dry!
Keep standing still during the course of weighing.
Do not strike, shock or drop the scale.
Treat the scale with care as it is a precise instrument.
Clean the scale with a damp cloth and avoid water getting inside the scale. DO NOT use chemical/abrasive cleaning agents.
Keep the scale in cool place with dry air.
Always keep your scale in horizontal position.
If failed to turn on the scale, check whether battery is installed, or battery power is low. Insert or replace new battery.
If there is error on display or cannot turn off the scale for a long time, please take off the battery for about 3 seconds, then install it again to remove soft-fault. If you cannot resolve the problem, please contact your dealer for consultation.
Do not use it for commercial purposes.

OVERLOAD INDICATION
Scale overload (max. weight capacity is indicated on the scale). Please step off to avoid damage.

LOW BATTERY INDICATION
Battery power is low. Please install new battery.

RE-TEST
Display “C” when you step off the scale, means this weight reading with error. Please re-test.

USING THE APPLIANCE

Step 1: To make sure accuracy, place on the carpet on soft surface.
Remark: if the scale is one of our “Slim” series (indicated on the package), make sure to put it on hard surfaces such as marble, floor tile etc., and make sure no foreign bodies are beneath the scale before weighing.
Step 2: Gently step on the scale, then the scale will be automatically turned on. Stand evenly on the scale without moving and wait until our weight shown on display is stable and locked.

AUTOMATIC SWITCH OFF
When you step off the scale, it will automatically switch off. Auto shut-off occurs if display shows the same weight reading for approximately 8 seconds.

TO CONVERT WEIGHT UNIT
If the scale is with both measuring system of Metric (kg) and Imperial (pounds, stones), you can convert weight unit as follow:

Condition 1: if the unit switch is inside the battery case:

A: open the battery case cover on the back of the scale
B: Pull up and down the unit switch to convert the scale unit between kg-lb-st

Condition 2: if the unit switch is on the back of the scale:

A: Find the unit switch on the back of the scale
B: Pull up and down the unit switch to convert scale unit between kg-lb-st. Condition 3: if the unit switch is on the back of the scale:
A: Find the unit switch on the back of the scale
B: Press the unit conversion button when the scale is powered on, LCD shows the current weight unit. Press the button again to convert the weight unit.

BATTERY

Type 1: 1x3V lithium battery (CR2032). Please remove the isolation sheet from the battery contact before use.
Type 2: 2×1.5V AAA batterie (excluded)

TO REPLACE BATTERY

Condition 1: Open battery case cover on the back of scale, if battery case is the type shown in picture 1

A: take out the used battery with the aid of a cuspidal object, as shown in picture 1;
B: install new battery by putting one side of the battery beneath the battery baffle and then please take note to the polarity.

Condition 2: Open battery case cover on the back of scale, if battery case is the type shown I picture 2

A: Pull the black tab outwards and the battery will come out
B: Install new battery by putting one side of the battery beneath the contact and then press down the other side. Please take note to the polarity.

Condition 3: Open battery case cover on the back of scale, if battery case is the type shown in picture 3

A. Press battery gently, the battery will pop up automatically
B. Install new battery by connecting one side of battery to the positive plate first, and then pressing down the other side. Please observe the polarity.

Condition 4: Open battery case cover on the back of scale, if battery case is the type shown in picture 4.

A. Take out the used battery (with the aid of a cuspidal object, if needed)
B. Install new battery by putting one side of the battery and then pressing down the other side. Please take note to the polarity.

TECHNICAL FICHE

Environment-friendly disposal
You can help protect the environment!
Please remember to respect the local regulations: hand in the non-working electrical equipment’s to an appropriate waste disposal center.

HEINNER is a registered trademark of Network One Distribution SRL. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from NETWORK ONE DISTRIBUTION.
Copyright © 2013 Network One Distribution. All rights reserved.
www.heinner.com, http://www.nod.ro
http://www.heinner.com, http://www.nod.ro

This product is in conformity with norms and standards of European Community

Importer: Network One Distribution
Marcel Iancu Street, no 3-5, Bucharest, Romania
Tel: +40 21 211 18 56, www.heinner.com , www.nod.ro