VISUAL COMFORT CHA 8437 Gemma Small Table Lamp Instruction Manual
- June 5, 2024
- VISUAL COMFORT
Table of Contents
VISUAL COMFORT CHA 8437 Gemma Small Table Lamp Gemma Small Table Lamp
Item # CHA 8437
NOTICE:
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction and
operation of it, as well as the hazards involved. Inspect item and contents
carefully. If any damage or defect is found, do not install. Retain all
packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED)
Scissors
-
Carefully remove all parts from the box. Place on a clean, soft surface.
-
Install harp (C) by squeezing together and inserting it into the top of the saddle (D).
-
Remove finial (A) from harp (C).
-
Remove shade (B) from packaging and install to harp (C) using finial (A).
NOTE: If the shade has additional packaging, carefully cut it off from the interior of the shade to avoid damage. -
Install light bulb into the socket.
-
Remove protective cover (E) from the plug.
-
Plug into an electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.