KLARSTEIN 10035373 Sauenland Pro XL Suckling Pig BBQ Grill Instruction Manual
- June 5, 2024
- Klarstein
Table of Contents
KLARSTEIN 10035373 Sauenland Pro XL Suckling Pig BBQ Grill
Dear Customer,
Congratulations on purchasing this device. Please read the following
instructions carefully and follow them to prevent possible damages. We assume
no liability for damage caused by disregard of the instructions and improper
use. Scan the QR code to get access to the latest user manual and more product
information.
TECHNICAL DATA
Item number | 10035373 |
---|---|
Power supply | 220-240 V ~ 50/60 Hz |
Engine power | 15 W |
Maximum load | 70 kg |
MANUFACTURER & IMPORTER (UK)
Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Chal-Tec UK limited Unit 6 Riverside Business Centre Brighton Road Shoreham-
by-Sea BN43 6RE United Kingdom
SAFETY INSTRUCTIONS
- This appliance, including the motor, is intended for grilling only.
- Always use only the supplied power cord.
- The power cord should be checked regularly for damage. If it is damaged, do not use the appliance.
- Children over the age of 8 years, mentally, sensorially and physically handicapped persons may only use the appliance if they have been thoroughly familiarized with the functions and safety precautions by a supervisor responsible for them and understand the risks involved.
- Keep the device and the cable out of the reach of children.
- If the power cord or plug is damaged, it must be replaced by the manufacturer, an authorised specialist company or a similarly qualifi ed person.
- Never operate the device in a damp environment or in the rain.
- Unplug the power cord before cleaning. Make sure that the plug does not get wet.
- Check the unit and the electrical components regularly for wear. If any parts are broken, do not use the appliance any further.
- Never place the appliance on an uneven surface.
- The appliance is not intended for commercial use, but only for domestic use and similar environments. This includes kitchens in offi ces, farms, hotels, motels and facilities that offer bed & breakfast.
- Turn off the appliance, unplug the power cord and allow the appliance to cool down before cleaning and storing.
- Do not use abrasive cleaning agents.
- Never clean the appliance under running water, this can cause a short circuit or electric shock!
- The grill motor may only be used outside in dry weather. Do not use it in rain or high humidity.
CAUTION: Risk of burns! Parts of the grill become very hot when the appliance is in operation. Be careful and use protective gloves when using the grill.
ASSEMBLY
Required for assembly:
- M6 hexagon socket wrench
- M10 hexagon socket wrench
- Open key
- M6 Sleeve
- Cross-type screwdriver
1 | Grill Leg | 19 | Stainless Steel Fork |
---|---|---|---|
2 | Chain | 20 | Motor |
3 | Motor Bracket & Rod Bracket | 21 | Spit Rod |
4 | M8 Wing Nut | 22 | Vent Cover Screw |
5 | M8*40 Hex Screw | 23 | Lock Nut |
6 | M10*40 Hex Head Screw | 24 | M6 Washer |
7 | M10 Screw Flat | 25 | M6 Nut |
8 | M10 Nut | 26 | Back Cover |
9 | Wheels without Brake | 27 | Grill body |
10 | Side Cover | 28 | U-Bolt |
11 | M6*10 Hex Head Screw & M6 Nut | 29 |
Meat Clip
12| Stainless Steel Hinge| 30| Vent Cover
13| Front Cover| 31| M8 Fixing
14| Thermometer| 32| Chain
15| Window| 33| Lock Pin
16| Crosshead Screw| 34| Right Cover
17| Front Cover Handle| 35| Cross Head Screw
18| L-Screw| 36| Side Handle
Mount the wheels with brake and without brake on the legs. Attach the legs to the grill housing with M1040 hexagonal screws and the adjustable rods with M840 screws.
Mount the side covers with M6*10 hexagonal bolts, washers and nuts.
Secure the rear cover with M6*10 hex bolts, washers and nuts.
Fasten the ventilation covers with M6 cross head screws, washers and nuts.
Secure the front cover and stainless steel hinge with M6*10 screws, washers and M6 nuts.
Mount the thermometer and make sure that it points in the right direction. Fasten the front handle with M6 cross screws. Fasten the window with M6*10 hexagonal screws, washers and nuts.
Fasten the side handle with M6 cross screws.
Mount the motor mount and the spit mount at the desired height.
Mount the motor.
Fasten the coal grids, the grill grids and the spit.
Secure the front cover and side cover with the locking bolt and chain.
Assembly is now complete.
OPERATION
- Remove all packaging materials from the outside and inside of the grill.
- Check that the voltage of your appliance matches the voltage of your power outlet.
- Fully unwind the power cord before use.
- If you are using an extension cord, place it so that no one will trip over it.
- When using it, take care not to wrap clothing or other objects around the motor.
- Before using the grill for the first time without food, light the fire without the motor for about 30 minutes to remove all factory contamination.
CLEANING AND CARE
- Pull the plug out of the socket.
- Let the grill cool down completely.
- Clean the individual parts of the grill with warm soapy water and a soft cloth.
- Only wipe the motor with a damp cloth. Make sure that no water gets into the motor.
Storage
Protect the motor from dust and dirt. If the unit is not to be used for a long
time, wrap it in plastic foil and store it in a dry place.
HINTS FOR DISPOSAL
If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>