EPIC ES-7000K Digital Door Lock User Manual

EPIC ES-7000K Digital Door Lock

Product Description

Product Components

Product Dimension

User Pin number registration

.caution Please perform while door is open Default pin number is 1,2,3,4. Don’t forget your pin number If you forgot your pin number, New registration of pin number, RFID card is not possible

1. CD Open battery cover, press [ Registration ] button and beep sound will be heard
2. Enter pin number followed by [ #] button (1st Registration: Enter Initial pin number+ [#]button)
3. Check if the numbers [ 1, 2, 4, 5] has been lighted on the number pad Press [ 1 ] button
4. Enter 4~12 digits new pin number to be registered Press [ # ] button
5. Re-Enter new pin number and press [ Registration ] button

Note + Only 1 user pin number can be saved

• When error occur during registration process,
• button will be blinking along with an error sound
• During each process, when [Reg] button is pressed, the registration process will be end
• When the registration process has completed, a completion sound will be heard

 User RFID Card Registration (all-at-once)

1. CD Open battery cover, press [Registration] button and beep sound will be heard
2. Enter pin number followed by [ #] button
3. Check if the numbers [ 1, 2, 4, 5] has been lighted on the number pad Press [ 2 ] button
4. Place the card to be registered on the card reader. When the card has been successfully registered, The designated 3 digit card number location will be displayed on the number pad
5.  The numeric LED lights up once in the order of [2] [1,3] [4,6] [7,9] [8] it is now on additional card registration status If you want to add more cards, repeat steps @ ~ @ If you no longer have a card to register, press the [ Registration ] button

User Guest Pin Number Registration (1-time usage)

1. CD Open battery cover, press [ Registration ] button and beep sound will be heard
2. Enter pin number followed by [ #] button
3. Check if the numbers [ 1, 2, 4, 5] has been lighted on the number pad Press [ 4] button
4. When LED is all lighted, enter guest pin number to be registered Enter 4~12 digits number and press [ # ] button
5. Enter guest pin number again Press [Registration] button and the registration of guest pin number is complete

Note

• If you register a new guest pin number,lhe old one will be deleted + Only 1 guest pin number can be saved. II will be deleted after 1 usage

User RFID Card Registration (one-by-one)

1. CD Open battery cover, press [Registration] button and beep sound will be heard
2. Enter pin number followed by [ #] button
3. Check if the numbers [ 1, 2, 4, 5 ] has been lighted on the number pad Press [ 2 ] button
4. First select card location number from 001 ~200 enter on the number pad, press [ #] button
5. When selected number is already in use, error sound will be heard and LED [ 7 ] will be lighted on the screen @ The numbers [2] [1,3] [4,6] [7,9] [8] will be lighted in sequence repeatedly, ii is in RFID card entry standby status. Place the card to be registerd on the card reader The beep sound will be heard and the saved 3 digit location number will be displayed on the number pad To register additional card, repeat steps @ ~ @ When all cards are registered press [ Registration ] button to complete

User Remote Control Registration {all-at-once)

• If the remote control receiver module is not connected, and number [5] button does not light up, the remote control cannot be registered

  1. CD Open battery cover, press [ Registration ] button and beep sound will be heard
  2. Enter pin number followed by [ #] button
  3. Check if the numbers [ 1, 2, 4, 5] has been lighted on the number pad Press [ 5] button and all LED will be lighted, II is now on stand-by mode for Remote Control Registration
  4.  Press [ Open ] button of the remote control to be registered When the remote control is registered successfully, the 3-digit remote control number will be displayed on the screen and registration is complete
  5.  To register additional remote control, repeat step@
  6. When registration of all remote control is done, press [ Registration ] button to complete the process

Note

• Up to 200 cards can be registered
• New registration will not delete previously registered card in the system ,.,
• When error occur during registration LED [2] will be lighted

User Remote Control Registration (one-by-one)

If the remote control receiver module is not connected, and number [5] button does not light up, the remote control cannot be registered CD

1. Open battery cover, press [ Registration ] button and beep sound will be heard
2. Enter pin number followed by [ #] button
3. Check if the numbers [ 1, 2, 4, 5] has been lighted on the number pad. press [ 5] button and all LED will be lighted, II is now on stand-by mode for Remote Control Registration
4. When the LED is all lighted enter the Remote control number on the number pad followed by [ #] button. You can select from 01~10 Remote Control numbers DI]
5. While on stand-by mode for new remote control registration press [Open] button of remote control to be registered
6. When the remote control is successfully registered  The remote control number will be displayed on the number pad. For registration of additional remote control repeat steps@~®
7. When all remote controls are registered, press [Registration] button to complete registration process ****

NOTE

• The network module should be installed on the unit to work
• Up to 10 remote controls can be registered
• New registration will not delete stored ones in the unit
• When an error occur during registration LED [2] will be blinking and an error sound will be heard

User RFID Card Deletion (All-at-once)

1. Open battery cover, press [ Registration ] button for 3 seconds Number pad will turn on
2. Enter user pin number followed by [ #] button User deletion mode on
3. Check if numbers [ 2, 5, 0 ] are lighted Press [ 2 ] button and the number pad will light up
4. When the number pad turns on press [ #] button for 5 seconds, the melody will be heard and all cards will be deleted
5.  The numeric LED lights up once in the order of [2] [1,3] [4,6] [7,9] [8] it is now on additional card registration status If you want to add more cards, repeat steps @ ~ @ If you no longer have a card to register, press the [ Registration ] button

User Remote Control Deletion (one-by-one)

• If the remote control receiver module is not connected, and number [5] button
  does not light up, the remote control cannot be registered G) Open battery cover,

  1. press the [ registration ] button for 3 seconds Number pad will light up
  2.  Enter user pin number followed by [ #] button User deletion mode on
  3.  Check if numbers [ 2, 5, 0 ] are lighted Press number [ 5 ]
  4. Enter the remote control number to be deleted, You can select from 001-010 then press [ #] button and the specific remote control will be deleted For additional remote control deletion, repeat step@ To end the registration process, press the [Registration] button

Random Number Feature

• Up to 20 digits can be entered including the original pin number
• The Pin number must be entered after the random number

Automatic Card Recognition / Manual Recognition

1. Enter the user pin number, press [ #] once basic feature setting ON
2. Press [ 1 ] button or [ 4 ] button Press [ Registration ] button and setting is complete

Note

•  [ 1 ] : Automatic Mode
•  [ 4 ] : Manual Mode
•  In Automatic mode – Place the RFID Card on the card reader and the door will open
•  In Manual mode – Touch the number pad, Place the RFID Card on the card reader and the door will open

Deadbolt auto lock / manual lock

*An optional feature that lets you set the lock in automatic and manual lock mode

1. Enter the user pin number, press [ #] once basic function setting ON
2. Press LED [ 2 ] button or LED [ 5 ] button Press [ Registration ] button setting is complete

Note

• LED 12 ] : Automatic Mode
• LED [ 5 ] : Manual Mode
• When deadbolt auto lock is set, the operation is executed automatically according to the state of the sensor
• When deadbolt is set to manual, Touch the number pad to execute the lock action

Sound Setting (Buzzer, Voice, Notification, Volume)

1. After entering user pin number, press LED [ #] button once [I[] to enter basic function setting mode
2. Press the LED [ 3] button or the LED [ 6 ] button
3. Press the [ Registration ] button to complete _ the setting and exit the setting mode

Note

• LED [ 3 ] : increase volume
• LED [ 6 ] : decrease volume
• Controls all volume except [ Alarm Volume ] and [ Door Opening Melody Volume ]
• Volume can be set to 8 levels ( 1 level : silent – 8 level : 80dB )

Door Opening Notification ON/ OFF

1. After entering user pin number, [I[] press [ #] button once to enter basic function setting mode
2. Press LED [ 7 ] button followed by [ Registration ] button to complete the setting and exit the setting mode

Note

•  ON and OFF setting is set by pressing alternately
•  When ON is set, [ deadbolt auto lock setting ] is in progress and the latched has reacted at least once, When the dead bolt is open, the buzzer will be heard for 3 times every 7 seconds

Voice mode I Buzzer mode setting

1. After entering user pin number, press [ #] button once to enter basic function setting mode
2. Press [ 8 ] button followed by [ Registration ] button to complete the setting and exit the setting mode

Note

• Repeat process to toggle between Voice mode I Buzzer mode setting
• For models without voice mode, it is always set to buzzer mode

minute lock warning function

• 5 consecutive failed pin number, card, will result to 1 minute suspension of authentication
• After the alarm sounds for 7 seconds, operation stops for 1 minute
• During 1 minute lock operation, an error sound occurs when authentication is attempted
• During 1 minute lock operation, Card and Remote control operation will not work
• Pressing [ Open /Close ] button will cancel the alarm
• The alarm can be released with the internal handle

Etiguette setting

Press [ # ] button
Note

•  Only the one time, pin, card, authentication will be silent regardless of [buzzer & alert & notification volume setting]
•  In the case of pin authentication, there is a maximum of 5 correct re-entry chance
•  However, a warning sound will occur after 5 successive authentication failures

Low battery warning function

•  When low battery is detected, the [ Battery Replacement ] LED lights up
• When low battery is detected, a notification melody will be heard
• Low voltage : 4.5V
• When the voltage returns to 5.5V, the alarm is released

User Registration Reset

1. Open battery cover, press registration button for 3 seconds Number pad will light up
2. Enter user pin number followed by [ #] button User deletion mode on
3. Check if numbers [ 2, 5, 0] are lighted Press [ 0] button and the number pad will light off
4. Press [ Open / Close ] button inside
5. Press [ Registration ] button for 10 seconds and all registered information will be deleted in the unit

Note

•  Even if the registration reset is performed the initial administrator pin will remain
• Only registered items will be deleted.Settings will remain
• Pressing [Reg] button while performing each @ – @ steps will end the process

Self-diagnosis

•  LED [ 2 ] : Registration & Deletion error (pin, card, remote control, dual-mode security authentication ON Setting failed)
• LED [ 3 ] : Registration error (pin, card, number of remote control registration full )
• LED [ 4 ] : Deadbolt operation error
• LED [ 5 ] : Intrusion alarm
• LED [ 6] : Authentication error (unregistered pin, card)
• LED [ 7] : In the registration mode, the number placement already registered (card, remote control )
• LED [ 8 ] : Fire Alarm
• LED [ 9] : Internal / External Force Lock Setting

Rule Part 15.19(a)(3): This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Rule Part 15.21: The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>