Suyu D01 Battery Camera User Manual
- June 15, 2024
- Suyu
Table of Contents
BATTERY CAMERA
USER MANUAL
Directory
First of all, thank you for purchasing our products. Please read this user
manual carefully before using the product and keep it properly.
This manual is applicable to various models of cameras.
The appearances may vary depending on different batches, and the actual device
received shall prevail.
The information in this manual is subject to change without notice.
Product Appearance
*The above descriptions are for some specific models, please refer to the actual product for details.
Packing List
After unpacking, please check whether the main unit is in good condition and
that all accessories are included.
Main Unit x1
Bracket x1
User Manual x1
Power Cable x1
Installation Kit x1
User Guide
-
Power up the device
1.Plug the power cord into the power connector of the device to power up the device, it indicates that the camera is powered on when the indicator lighton the front turns on, or the LEDs flash, or the speaker beeps. 2. Make sure your phone is connected to 2.4GHz Wi-Fi network.
3.Please ensure that the camera is successfully added to the App before installing it on the wall. -
APP Download and Registration
1.You can search for ‘Facea’ in the App Store, Google Play Store and other available application markets, or simply scan the QR code below to download the APP . 2.Open the ‘Facea’ APP , tap the “Free Registration” icon, and select an account type to register, as shown in the figure Due to upgrades and updates of the APP , the actual operation steps may be slightly different from the guide described in the manual. Please follow the instructions in the APP for registration. -
Device Adding Process
Complete the network configuration of the camera following the tips of the Facea APP .
Log in with an account, click the ‘Add device’ or ‘＋ icon’, scan the QR code on the device (4G devices can be added after scanning the code), as shown in the figure.
-
Device Network Configuration
1.Enter the password of the WiFi that the phone is connected to. -
Scan the QR code generated by the APP using camera lens, tap ‘Next’ when ‘ding-dong’ was heard, and wait for the configuration to complete.
-
Camera Installation Method
1.Surface mounted
2.Ceiling mounted
3.Wall mounted
-
Schematic Diagram of Ceiling Mounted and Installation
Note: The installation wall shall withstand at least 3 times the total weight of the camera and the bracket.
Notes
To prevent fire or electric shock accidents, please do not place this product
in a humid or rainy place, and please follow the instructions for operation or
maintenance.
Users should be careful when seeing accessories with Dangerous Voltage,
because this accessory may cause serious voltage accidents.
Warning
To reduce the risk of electric shock, non-professionals should not open the
front or back cover of the machine.
Notice
To avoid risk of electric shock or fire, do not use power sources beyond the
range listed in this manual.
To protect your rights and interests, please read this manual carefully before
installing and using this product.
For installation and maintenance of this product, please contact qualified
personnel.
The operating temperature range of this equipment is -20℃~+60℃, and the
relative humidity is lower than 85%. When operating this product, do not
exceed the temperature, humidity, or power ranges stated in this manual.
FAQ
1.Q: Where are the video clips stored?
A: If the Cloud storage is activated, the video clips are stored both in the Cloud and on the TF (Micro SD) card; If the Cloud storage is not activated, the video clips are stored on the TF (Micro SD) card only.
2.Q: What is the maximum capacity of TF (Micro SD) card supported by the camera? For 32G/64G/128G TF (Micro SD) card with 24/7 video recording, how long can the video clips be stored respectively without overwriting?
A:It supports max. 128G TF (Micro SD) card.
3.Q: How to upgrade the firmware of the camera?
A: The camera supports OTA upgrades. When new firmware is available, click --> ‘Settings’ --> ‘Firmware Upgrade’ for upgrading.
4.Q: The camera has no internet access or in offline state.
A:1. Check whether the power supply is working properly. 2. Power off and restart the device (press the reset button for no less than 5 seconds) to reconnect to the router. 3.Sites with weak signal coverage. Signal interference shielding in special sites
5.Q: What are the things to pay attention to when using the camera?
A: For better imaging, please avoid obstructions near the front or side of the lens when positioning the camera, or close to reflective objects such as glass and white walls which would cause the phenomenon that the near part of the picture is bright, and the far part is dark or whitish.
After-sales Service
-
Product failures caused by the following conditions are not covered by the warranty:
a. Product failure due to accident, negligence, disaster, improper operation or mishandling;
b. Product failure due to improper environment or conditions of use, such as incompatible power supply, ambient temperature, lightning strikes, etc.
c. Products that have been repaired by non-manufacturer authorized repair units;
d. Products sold for more than 12 months. -
When users encounter product failure, please contact the dealer or local service agency for technical support with the user registration card.
-
When the user has any objection to the technical service provided by the dealer, he can initiate a complaint with the customer support service center of the manufacturer.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
.This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not
be co-located or operating in conjunction with any other antenna or
transmitter. End-users and installers must be provide with antenna
installation instructions and transmitter operating conditions for satisfying.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>