nathan james 17203 Violet Track Light Instruction Manual
- June 17, 2024
- NATHAN JAMES
Table of Contents
- nathan james 17203 Violet Track Light
- Product Information
- Product Usage Instructions
- Pre-Installation Steps
- Frequently Asked Questions
- What’s included
- Safety first, fun later
- The goods
- Pre-Installation
- Troubleshooting
- No heartburn, when we handle the return
- Questions? Don’t worry, we’ve got the answers
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
nathan james 17203 Violet Track Light
Product Information
Specifications
- Product Name: Violet Track Light
- SKU: 17203
- Estimated Assembly Time: 45 minutes
- Warranty: Free Lifetime Warranty
Product Usage Instructions
What’s Included
| Description | Qty |
|---|---|
| Fixture | 1 |
Safety Instructions
Safety first, fun later! Please follow these important safety guidelines:
- Do not modify the structure of the product.
- Use the light fixture responsibly for your safety.
- Inspect the product upon receipt and before each use.
- Do not use outdoors or for commercial purposes.
- Avoid leaving spilled liquid on the fixture.
Installation Instructions
Pre-Installation Steps
- Remove the screws from the non-fixed arm of the Fixture.
- Secure the non-fixed arm into the Fixture using the screws.
- Decide the necessary fixture stem length for your desired fixture height.
Assembly Steps
- Pass the cord through each necessary stem component.
- Braid the cord and pass it through the tubes smoothly.
- Thread the necessary stem components between the Canopy and Fixture to complete the connection.
Important Notes
- Do not tighten bolts/screws completely until all are lined up and inserted.
- Avoid over-tightening screws to prevent stripping.
- Use hand tools for assembly, not power tools.
Frequently Asked Questions
Q: What should I do if there is a defect in the wire insulation?
A: If you notice any cuts, abrasions, or exposed copper in the wire, do not attempt installation. Contact our Customer Happiness team immediately for assistance.
Q: How can I prevent electrical shock during installation?
A: Before starting installation, disconnect the power by turning off the circuit breaker or removing the appropriate fuse. Turning off the switch is not enough to prevent electrical shock. Consult a qualified electrician if needed.
Let’s build the Violet Track Light
SKU 17203
Scan me!
Free Lifetime Warranty
Ok, let’s get rolling
This should be easy, just follow our instructions and you will be back to
Netflix in no time.
Estimated time for assembly
What you need
- Your favorite snack or energy bar (Save the bubbly for once your fixture is safely installed!)
- Use the packaging carton as a working surface to prevent product damage during assembly
- Phillips head screwdriver
Do not use a drill
What’s included
Safety first, fun later
Safe use of this product starts with you.
Use this light fixture responsibly with the primary concern for your safety.
Follow assembly instructions carefully and inspect product upon receipt and
each use.
Nathan James and its parent companies cannot be held legally responsible for
any injuries
or death resulted from failure to follow instructions or improper use of this
product.
Proper use
- DO NOT use for commercial purposes
- DO NOT leave spilled liquid on fixture
- DO NOT use light fixture if damaged
- DO NOT make temporary repairs
- DO NOT use outdoors
Do not modify the structure of this product in any way.
Our products have been tested to meet specific safety measures as they were
originally intended to be sold. Any modifications will present the risk of
creating significant safety issues which Nathan James will not be responsible
for.
WARNING
Inspect the wire insulation for any cuts, abrasions, or exposed copper that
may have occurred during shipping. If there is a defect in the wire, do not
attempt installation. Please reach out to our Customer Happiness team at
help@nathanjames.com or
1-866-619-1004
WARNING: RISK OF ELECTRIC SHOCK
Before starting the installation, disconnect the power by turning off the
circuit breaker or by removing the appropriate fuse at the fuse box. Turning
the power off at the switch is NOT SUFFICIENT to prevent electrical shock.
PLEASE CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS.
The goods
IMPORTANT
- Do not tighten bolts/screws completely until all bolts/screws are lined up and inserted into holes.
- Do not over-tighten screws and bolts to avoid stripping.
- Please use hand tools to assemble this product. Do not use power tools.
Pre-Installation
- Read all instructions prior to beginning assembly.
- To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
- Keep the receipt and these instructions for proof of purchase.
- Suggested Bulb: ST19 Vintage LED 60 Watt Equivalent | E26 Medium Base | Dimmable
- Fixture Max Wattage: 240W (60W per bulb)
Step 1
It’s as easy as it looks! Remove the screws from the non-fixed arm of the
Fixture (1).
Step 2
Secure the non-fixed arm into the Fixture (1) by first sliding it into place
and then using the screws that you removed in Step 1 to tighten.
Step 3
Decide your necessary fixture stem length to achieve your desired fixture height. Then, pass the cord through each of the necessary stem components for your desired fixture height.
Step 3 cont.
Thread the necessary stem components together to complete the connection
between the Canopy (6) and the Fixture (1).
(Components will vary depending on your desired fixture height)
Step 4
Remove the Finial Nuts (C) from the Mounting Bracket (B).
Step 5
Mount the Mounting Bracket (B) onto your existing Electrical Box.
Note: Be sure that you are only making the connections to a 120V AC 60Hz circuit. If you do not have a pre-existing electrical box, we strongly advise using a certified electrician.
Step 6
You can adjust the orientation in which your fixture will face by using the
adjustment screw in the middle of the Mounting Bracket (B).
First, slightly loosen the adjustment screw, then rotate the Mounting Bracket
(B) to have the threaded posts oriented in your desired direction before re-
tightening the adjustment screw to re-secure the Mounting Bracket (B) in
place.
Step 7
Wrap the Ground Wire from the Fixture (1) around the grounding screw on the
Mounting Bracket (B) & then secured by tightening the screw.
Use a Wire Nut (D) to join the ground wire from the Fixture (1) with the
ground wire from the Electrical Box.
Step 8
Use Wire Nuts to join the remaining matching colored wires (White to White,
Black to Black). Once complete, tuck the excess wire into the Electrical Box.
Step 9
Secure the fixture to the Mounting Bracket (B) on your pre-installed
Electrical Box using the Finial Nuts (C) that you originally removed in Step
4.
Step 10
Install your light bulbs (not included) and then adjust your shade and bulb
assemblies to your desired orientation.
Troubleshooting
| Problem | Possible Causes | Solutions |
|---|---|---|
| The bulb will not light. | The bulb is burned out. | Replace the light bulb. |
| The power is off. | Ensure the power supply is on. | |
| The circuit breaker is off. | Ensure the circuit breaker is in the ON position. | |
| The fuse blows or circuit breaker blows when the light is turned on. | There is | |
| an exposed wire. | Discontinue use of the light. |
Contact a qualified electrician or reach out to our Customer Happiness team at help@nathanjames.com or 1-866-619-1004.
No heartburn, when we handle the return
Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com we will issue you a free replacement with zero hassle.
We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.
We are only in business if you’re happy
For starters, thanks for being you.
Toll-free at 1-866-619-1004
Help@nathanjames.com
NathanJames.com/help
We do our best to ensure your product arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free.
Warranty
This product comes with a lifetime warranty from the date of purchase. Please
use your phone to scan the QR code to register your product or visit
https://goo.gl/i9dk3q
Did we do alright? Please spread the love!
If you are happy with your product, tell your friends and family about us or
even better leave us a review online. Spreading the word gives us the
opportunity to make more people happy and keep our
prices low for your next purchase.
Brooklyn Burdon
Founder, Nathan James
Questions? Don’t worry, we’ve got the answers
What other light bulbs can fit in this light?
The bulb must not be greater than the max wattage for the fixture. It must match the base size, and the diameter of any area of the bulb should be less than diameter of any area of shade, so that it can fit.
Can I use an LED light bulb?
Yes, so long that the base size matches and the diameter of any area of bulb is less than diameter of any area of shade, so that it can fit.
Is this UL/ETL certified?
Yes, all our products are either UL or ETL.
Do I need an electrician to set up the hardwire?
We recommend using a certified electrician for all hardwiring, although all of our fixtures can be set up without an electrician, as long as you are replacing an existing fixture or have an existing junction box ready for a fixture installation. ENSURE POWER IS OFF WHEN INSTALLING. For all new constructions, please use a certified electrician.
Can I retrofit this hard-wired to a plug-in or vice-versa?
Yes, a plug-in fixture can be turned into a hardwire fixture and a hardwire fixture can become a plug-in fixture. For many products we will provide all the necessary hardware to make these changes, if not, you will need to purchase the necessary hardware.
Is this light compatible outside North America?
Our lighting is only warranted in Canada and the United States.
What do I do if the product is not working?
Try a different light bulb and confirm proper installation.
Can these lights work on a dimmer?
Dimmability is related to the light bulb and the wall switch, not the light fixture. All our hardwire fixtures are compatible with dimmable light bulbs. We recommend using a dimmer switch, as it extends the life of the bulb and allows for energy saving and great ambiance. If using a LED bulb, please ensure both your LED bulb and dimmer switch are compatible.
Can I use the fixture outdoors?
No, this product was not designed to be used outdoors.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>