Mean Well IDPV-45 45W PWM Output LED Driver User Manual

: June 5, 2024
: MEAN WELL

Table of Contents

Features
Applications
GTIN CODE
Description
Model Encoding
SPECIFICATION
DIMMING OPERATION
OUTPUT LOAD vs TEMPERATURE
BLOCK DIAGRAM
MECHANICAL SPECIFICATION
INSTALLATION MANUAL
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**45W PWM Output LED Driver
I D P V- 4 5 series

http://www.meanwell.com.cn/Upload/PDF/LED_EN.pdf
**

Features

Constant Voltage PWM style output with frequency 1 KHz
PCB type design
Built-in active PFC function
No load power consumption<0.5W
Function options: 2 in 1 dimming (dim-to-off); Auxiliary DC output
3 years warranty

Applications

LED strip lighting
Indoor LED lighting
LED decorative lighting
LED architecture lighting

GTIN CODE

MW Search. haps://www.meanwell.corniserviceGTIN.aspx

Description

IDPV-45 series is a 45W PCB type AC/DC LED driver featuring the constant voltage mode PWM style output design. IDPV-45 operates from 90-295VAC and offers models with different rated voltages ranging between 12V and 60V. Thanks to the high efficiency of up to 90%, with the fanless design, the entire series is able to operate for -20 C -+40 C ambient temperature under free air convection. IDPV-45 is equipped with various function options, such as dimming methodologies, so as to provide design flexibility for the LED lighting systems.

Model Encoding

Type	Function
Blank	2 in 1 dimming (0-10VDC and 10V PWM)
A	2 in 1 dimming and Auxiliary DC output

SPECIFICATION

MODEL	IDPV-45❑12	IDPV-450-24	IDPV-4C-36	IDPV450-48	IDPV-45❑-60
OUTPUT	DC VOLTAGE	12V	24V	36V	48V
RATED CURRENT	3.0A	1.88A	1.25A	0.94A	0.75A
RATED POWER	36W	45.12W	45W	45.12W	45W
DIMMING RANGE	0-100%
VOLTAGE TOLERANCE	±10%
PWM F REQUE NCY (Typ.)	1KHz(±20%)
SETUP TIME Note.3	500ms / 230VAC 1200ms/115VAC
AUXILIARY DC OUTPUT NOW	Nominal 1 2V(deviation 11.4-12.6)@50 mA for

A-Type only
INPUT| VOLTAGE RANGE Note.2| 90 – 295VAC          127 – 417VDC
(Please refer to the ‘STATIC CHARACTERISTIC’ section)
FREQUENCY RANGE| 47 – 63Hz
POWER FACTOR (Typ.)| PF>0.95/115VAC, PF>0.92/230VAC, PF>0.9/277VAC@full load (Please refer to TOWER FACTOR (PF) CHARACTERISTIC’ section)
TOTAL HARMONIC DISTORTION| T HD< 20°0(@load60°0/115VAC,230VAC; @load75°0/277VAC) (Please refer to “TOTAL HARMONIC DISTORTION’ section)
EFFICIENCY (Typ.)| 84%| 186%| 188%| 188%| 190%
AC CURRENT (Typ.)| 0.6A / 115VAC         0.4A / 230VAC        0.3A / 27NAC
INRUSH C UR RENT(Typ.)| COLD START 30A(hvidth=150)..ts measured at 50% (peak) at 230VAC; Per NE MA 410
MAX. No. of PSU s on 16A CIRCUIT BREAKER| 32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT| <0.75mA/ 277VAC
NO LOAD POWER CONSUMPTION| <0.5W for Blank-Type, <1.2W for A-Type
PROTECTION| SHORT CIRCUIT| Shut down 0/P voltage, re-power on to recovery
OVER CURRENT| 105 -115%
Protection type: Hiccup mode, recovers automatically after the fault condition is removed
ENVIIGINENT| WORKING TEMP.| Ta=-20 – +40C (Please refer to OUTPUT LOAD vs TEMPERATURE’ section)
WORKING HUMIDITY| 20- 90% RH non-condensing
STORAGE TEMP., HUMIDITY| -40- +80°C, 10 -95% RH
TEMP. COEFFICIENT| ±0.03%/°C (0- 40°C)
VIBRATION| 10- 500Hz, 2G 10minficycle, the period for 60min. each along X, Y, and Z axes
SAFETY & EMC| SAFETY STANDARDS| UL8750,CSAC22.2 NO.250.13-12;E NEC BS EN/EN61347-1& BS E N/E N61347-2-13 independent, BS EN/EN62384 approved
WITHSTAND VOLTAGE| UP-0/P:3.75KVAC
ISOLATION RESISTANCE| UP-0/P:100M Ohms / 500VDC / 25°C/ 70% RH
EMC EMISSION| Compliance to BS EN/E N55015, BS EN/EN61000-3-2 Class C (@load % 60%) ; BS EN/E N61000-3-3
EMC IMMUNITY| Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/E N61547, light industry level(surge im mu nity: Lin e-Lin e:1KV)
OTHERS| MTBF| 4022.6K hrs min.          Telcordia SR-332 (Bellcore); 425.1K hrs mm.        MI L-H DBK-217F (25°C)
DIMENSION| 120’66.5’22mm (L’WH)
PACKING| 0.14Kg;81pcs/12.5Kg11.32CUFT
NOTE| 1. All parameters NOT securely mentioned are measured at 230VAC input, rated current, and 25°C of ambient temperature.
2. De. rating may be needed under low input voltages. Please refer to ‘STATIC CHARACTERISTIC sections for details.
3. Length of setup time is measured at cold first std. Turning ON/OFF the driver may lead to b increase in the setup time.
4. Aux. 12V will be damaged with a short circuit; It will not be available with dimming off or output no load condition.
5. The driver is considered as a component that will be operated in combination with final equipment. Sinai, EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
6. To fall! into the requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without being permanently connected to the mains.※Product Liability Disclaimer: For detailed information, please refer to htlps://www.meanwell.com/reerviceDisdaimer.aspx

DIMMING OPERATION

※ Dimming principle for PWM style output

Dimming is achieved by varying the duty cycle of the output current.

※ 2 in 1 dimming function
◎ Applying additive 0 ~ 10VDC

◎ Applying additive 10V PWM signal (frequency range 300Hz~3KHz):

|
---|---

Note

Min. duty cycle of output current is about 8% and the output current is not defined when 0%< Iout<8%.
The duty cycle of output current could drop down to 0% when dimming input is about 0Vdc or 10V PWM signal with 0% duty cycle.