Gymax 350-Watt AIR Blower User Manual
- June 5, 2024
- GYMAX
Table of Contents
Gymax 350-Watt AIR Blower
Before You Start
- Please read all instructions carefully.
- Retain instructions for future reference.
- Separate and count all parts and hardware.
- Read through each step carefully and follow the proper order.
- We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
- Always place the product on a flat, steady and stable surface.
- Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.
READ AND SAVE THESE INSTRUCTIONS
- Read and follow all instructions before operating the air blower.
- Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or adjustment.
- Do not use an extension cord with this air blower.
- The appliance must be positioned so that the plug is accessible.
- The air blower should never be left unattended when in use. The appliance is not to be used by children if they are not supervised by an adult.
- No objects should cover the air intake when the air blower is in use, and sand, small stones or other objects should not be allowed to be sucked into the air blower.
- Under no circumstances should a finger or any sharp object be inserted into the air intake.
- Unplug from outlet when not in use and before cleaning or servicing.
- Do not expose the blower of wet condition to reduce the risk of electric shock.
- Do not use an adapter with this product.
- Do not drop or strike the blower which may result in malfunction.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, CONNECT ONLY TO AN OUTLET
PROVIDED WITH A GROUND FAULT CIRCUIT INTERRUPTION DEVICE.
WARNING – To reduce the risk of fire or electric shock, do not use the
blower with any solid-state speed control device.
WARNING – To reduce the risk of electric shock, Do not use an extension
cord with this air blower.
INSTALLATION
- The air blower is first to be placed on the ground and then attached in place with plastic nails through the fixing holes.
- The air blower should be installed in a well-ventilated location and on a level surface.
USING
- Connect the plug to AC 120V/60Hz socket.
- Turn on by pushing “1” firmly. Turn off by pushing “0”.
MAINTENANCE AND STORAGE
- To keep the air blower clean you can use a dry cloth to wipe the surface of the air blower.
- Never use chemical solutions to clean the blower as this may damage the coating and plastic parts.
- Never immerse the air blower in water.
- The air blower should be stored indoors.
GROUNDING INSTRUCTIONS
This product must be grounded. In the event of an electrical short circuit,
grounding reduces the risk of electric shock by providing an escape wire for
the electric current. This product is equipped with a cord having a grounding
wire with an appropriate grounding plug. The plug must be plugged into an
outlet that is properly installed and grounded in accordance with all local
codes and ordinances.
Check with a qualified electrician or serviceman.
This product is for use on a nominal 120-V circuit and has a grounding plug
similar to the plug illustrated in the figure below. Only connect the product
to an outlet having the same configuration as the plug. Do not use an adapter
with this product.
WARNING
Improper installation of the grounding plug is able to result in a risk of
electric shock. When repair or replacement of the cord or plug is required, do
not connect the grounding wire to either flat blade terminal. The wire with
insulation having an outer surface that is green with or without yellow
stripes is the grounding wire.
Troubleshooting
The motor does not run
| 1. The switch is not activated
2. The circuit is open or has poor contact
3. Capacitance damage
4. Blocked by hard objects
---|---
| 1. The screws on the
The motor is running, but| impeller are loose
the wheels are scratching| 2. There are foreign
| objects in the fan
| 3. The impellers are
| deformed.
| 1. Unstable voltage
The motor does not operate normally| 2. The motor is affected by humidity
| 3. Electrical capacity
| failure
| 4. Loose impeller