Gymax GYM02162 Inflatable Bounce House Castle Jumper Moonwalk Playhouse Slide Instructions
- October 30, 2023
- GYMAX
Table of Contents
Gymax GYM02162 Inflatable Bounce House Castle Jumper Moonwalk Playhouse
Slide
Product Information
This is an inflatable product designed for recreational use. It is made of durable materials and can be used both indoors and outdoors. The product comes with an air pump for easy inflation and deflation.
Product Usage Instructions
- Choose a flat, clear area for the product to be placed on.
- Unpack the product and lay it out flat.
- Connect the air pump to the product’s valve and begin inflating the product.
- Monitor the inflation process and stop when the product is fully inflated.
- Secure the valve to prevent air from escaping.
- The product is now ready for use. Enjoy!
- To deflate the product, open the valve and carefully press out the air while folding the product.
- Pack the product back into its original packaging for storage.
It is important to follow these instructions carefully to ensure safe and proper use of the product.
Congratulations on your new inflatable product purchase! Please read all instructions carefully before use.
Precautions
- Ensure electrical source is safe and stable before operation.
- Keep children away from blower. Do not insert fingers, toes, etc into the blower, or it may cause injury. Do not insert foreign objects into the blower. This will cause damage.
- Do not bring sharp objects into play area.
- Do not eat in play area.
- Do not smoke in play area.
- Keep product away from fire and heat.
- case of blower malfunction, tighten blower vent and evacuate play area immediately.
- Do not use in rain, strong wind or extreme weather conditions.
- Observe precautions on product WARNING LABEL at all times.
STEP2: Setup
- Product should be assembled by an adult.
- Unroll product evenly across smooth, flat, debris-free surface. Connect blower(s) to inlet, and tie. Anchor the blower to the ground using the stakes provided.
- Plug in and start blower. If your item uses multiple blowers, connect all blowers to their inlets. Make sure all blowers are powered off (blower models with switch). Plug in all blowers, then switch them on one-at-a-time at 20 second intervals.
- Once inflated, anchor the inflatable product to the ground using the stakes provided.
STEP3: Disassembly
- Ensure that all the players have left play area.
- Remove any loose articles or debris from play area.
- Turn off, and unplug blower.
- Once product is fully deflated, fold & store in cool, dry area.
STEP4: Maintenance & Repairs
- Always keep products clean to protect the seams and surface.
- Regularly inspect seams and play surface for any necessary repair. Slight damage caused by nature or man-made factors can be repaired with the repair kit provided.
- To repair, deflate the product thoroughly, and ensure surface is dry. Cut patches to sizes suitable for repair. Apply glue on both the repair patches, and the damaged surface. Allow the glue to air-dry for 30 seconds before adhering the patch to the play surface. Allow to dry for at least 4 hours before use
NOTE:
- Maximum weight of user : 100lbs each.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>