GYMAX UY10001 Multi Game Table User Manual
- May 15, 2024
- GYMAX
Table of Contents
GYMAX UY10001 Multi Game Table
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Please give us a chance to make it right and do better
- Contact our friendly customer service department for help first.
- Replacements for missing or damaged parts will be shipped ASAP!
Before You Start
Please read all instructions carefully and keep it for future reference.
WARNING
Attention : The Product is not suitable for children under 3 years
Danger: Keep all small parts and packaging materials for this product
away from babies and children, otherwise they may pose a choking hazard.
WARNING: CHOKING HAZARD-Small parts. Not for children under 3 years.
General Warnings
- The product must be installed and used under the supervision of an adult.
- Read through each step carefully and follow the proper order.
- Remove all packaging, separate and count all parts and hardware.
- Please ensure that all parts are correctly installed, incorrect installation can lead to a danger.
- We recommend that, where possible, all items are assembled near the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
- Ensure a secure surface during installation, and place the product always on a flat, steady and stable surface.
WARNING: Choking Hazard–Toy contains small balls and/or small parts. Not for children under 3 years.
IMPORTANT
Please Keep Your Instructions. Before attempting assembly, please read through
this instruction book to familiarize yourself with all the parts and assembly
steps. We recommend that two adults assemble this game. Please refer to the
Parts List below and be sure that all parts have been included.
PARTS LIST
**ASSEMBLY INSTRUCTIONS
**
We recommend that two adults work together to assemble this game.
-
Open the carton of your new table game near where you will play. Select a clear-level floor. This game requires at least two adults to assemble the table.
-
Remove all the contents from inside the carton and verify that you have all listed parts as shown on the Parts List. We suggest that you use the bottom carton as a clean flat working area to protect the game. Carefully cut or tear the four carton corners so that the bottom is now your work area.
-
Attach one end Apron (#2) between the Side Aprons (#1) using two Washer Head Screws (#10) per Side. See FIG.1.
-
NOTE: Leave connections loose – Do not tighten screws securely at this time.
-
Slide the Playfield (#3) with graphics facing down as shown in FIG 1. If the field does not slide smoothly, check to be sure you have not over-tightened any screws or the Playfield is not caught by the slot.
-
Repeat the step to attach the other end Apron to the Side Aprons (#1).
-
Place two Support Braces (#4) on Playfield (#3) as shown in FIG.2. Attach them using two of Washer Head screws (#10) per side. See FIG.2.
-
Attach the player rods (#14 – #16) into the side aprons as shown in FIG.3A.Attach the rubber bumper (#23) to the player rod, followed by the players (#18 & #19) and another rubber bumper (#23). See FIG 3-1
-
Attach Players (#18 & #19) to the player rods using one 4x20TM(#11) and one Nut(12). See FIG 3-2
-
Attach Goal Boxes (#27) to End Aprons using four of Washer Head Screws (#9) per Goal Box. See FIG.4.
-
Put Hand Grips (#21) and End Caps (#22) on the player rods in order.
NOTE: To make the Handles easier to attach, spray a little window cleaner on the rod ends before installation and tap on gently with a hammer. See FIG.5. -
Attach Legs (#25 & #26) to the cabinet (#24) using four Bolts (#7) and four Washers(#8) per Leg. See FIG.6.
-
Attach the two End Leg Braces (#6) to the legs using four Washer Head Screws (#9) per Leg. See FIG.6.
-
Locate Leg Leveler(#13) And Screw Into per Leg. See FIG.6.
Contact Us
Do NOT return this item.
Contact our friendly customer service department for help first.
US: cs.us@costway.com
UK: cs.uk@costway.com