SUPER MARIO 02497TXWE World of Nintendo Mini RC Racer Mario Instructions

SUPER MARIO 02497TXWE World of Nintendo Mini RC Racer Mario Instructions

CONTROLLER (02497TXWE): 1.5V AA (LR6) ALKALINE BATTERIES REQUIRED NOT INCLUDED Mini Anti-Gravity Racer (02497RXWE): 1.5V AA (LR6) ALKALINE BATTERIES REQUIRED NOT INCLUDED.

Includes 6 AA (R6/LR6) Batteries. Batteries are for “Try Me” purpose only. Unplug the cable on the Racer and Controller. Remove the Racer’s AA (R6/LR6) batteries and replace with fresh batteries.

Maximum Transmission power. 02497TXWE: 0.327mW, 02497RXWE: 0.4266mW
Frequency Band: 2405-2475MHz

02023 and manufactured for Pacific. Other trademarks used under license. MADE IN CHINA.

Imported into UK by
Amsterdam NL. Importado por: JPK Holdings Mexico, S.A. de C.V.
www.jakks.com www.jakks.com/warranty consumers@jakks.com
North America

Product may be patented.
Colors & decoration may vary. Retain packaging/instructions for reference.

Remove all packaging before giving toy to child.
WARNING! Small Parts. Choking Hazard.

TRY ME BATTERY BOX REMOVAL

3. Using a Phillips Head screwdriver (not included) remove the BATTERY cover on the RACER and CONTROLLER and detach the wires on both.

2. Remove inner packaging until RACER and CONTROLLER are as shown above.

4. Push the power switch of the RACER to “OFF’ position. Remove the Racer AA batteries. Install fresh batteries in the RACER and  CONTROLLER and replace the battery covers on both. (see BATTERY INSTALLATION.)

CONTROLLER BATTERY INSTALLATION

ADULT INSTALLATION REQUIRED
Requires 2 – 1.5V AA (LR6) ALKALINE BATTERIES.
Batteries not included.
When performance diminishes, replace with fresh batteries.

1. Locate and open BATTERY COVER as shown. Use a Phillips Head screwdriver (not included) to loosen screw. Screw remains attached to cover.
2. Install 2-1.5V AA (LR6) ALKALINE BATTERIES in the orientation shown.
3. Replace BATTERY COVER and tighten screw.

RACER BATTERY INSTALLATION

Make sure RACER is in OFF position. Locate BATTERY COVER underneath RACER as shown. Use a Phillips Head screwdriver (not included) to loosen screws and remove cover.

Install 6 – I .5V AA (LR6) ALKALINE BATTERIES in the orientation shown.

Replace BATTERY COVER and tighten screws.

IMPORTANT SAFETY INFORMATION

Caution: Not recommended for children under 4 years of age. Read instructions before operating. Avoid hitting people, pets or home furnishings. Never operate in the street. Keep hair, hands and clothing away from vehicle when power switch is turned ON. DO NOT pick up moving vehicle. Remove batteries and controller batteries when vehicle is to be stored for an extended period. Do not store in direct sunlight. VEHICLE WORKS BEST ON SMOOTH, FLAT, CLEAN, DRY SURFACES, FREE OF DIRT AND DUST. NOT INTENDED FOR USE ON CARPET.

OPERATING THE ANTI-GRAVITY RACER

1. Turn the CONTROLLER power switch to the “ON” position.

2. Turn the POWER switch on the bottom of the RACER to the “ON” position.
3. When the RACER and CONTROLLER are turned ON, the power light on the CONTROLLER will flash to sync with the RACER. When the power light stops flashing and remains ON , the sync is complete.

THE CONTROLLER

The CONTROLLER has 4 buttons: The two at the top of the CONTROLLER turn the ANTI-GRAVITY wheels horizontal or vertical.

1. Press the RIGHT TOP button to turn the wheels into ANTI-GRAVITY mode.
2. Press the LEFT TOP button to turn the wheels into STANDARD mode.

3. Shift the LEFT stick to command forward or reverse.

4. Shift the RIGHT stick to command left or right.

TURNING RACER ON

Push the ON/OFF/TRY ME button to the ON position.

OPERATING THE ANTI-GRAVITY RACER AND PERFORMING STUNTS

STANDARD DRIVING MODE

Shift LEFT stick to go FORWARD/REVERSE. Shift RIGHT stick to go LEFT/RIGHT.

360˚ SPINS

Shift and hold the RIGHT stick in either direction.

WHEELIES MANUALS

Shift the LEFT stick to backward and Shift to forward immediately and then shift the RIGHT stick to the LEFT or RIGHT.
*Wheelies work best on rough surfaces. If RACER only goes back and forth, fresh batteries may be needed.

Press the TOP RIGHT button to turn wheels into anti-gravity mode.
Press TOP LEFT button to return wheels to standard mode.

POWER SLIDES

Drive forward, press the TOP RIGHT button to turn the wheels into anti-gravity mode then shift the RIGHT stick to the LEFT.

Press the TOP RIGHT button to turn wheels into anti-gravity mode, shift the LEFT stick forward and the RIGHT stick LEFT or RIGHT at  the same time.

TROUBLESHOOTING

BATTERY SAFETY INFORMATION:

BATTERY SAFETY INFORMATION:
WARNING! Battery acid leakage can cause personal injury and cause damage to the product and surrounding property. If battery leakage occurs, thoroughly wash any affected skin, making sure to keep battery acid away from eyes, ears, nose and mouth. Immediately wash any clothing or other surface that comes in contact with leaked battery acid. Leaking batteries may make “popping” sounds. Always remove replaceable batteries before disposing product. Dispose batteries or products with non-replaceable batteries according to Local, State or Federal Battery and Recycling Laws.

TO AVOID BATTERY PROBLEMS:

• NEVER mix old and new batteries or different brands of batteries.
• NEVER mix alkaline, standard (carbon-zinc), rechargeable batteries with this product.
• NEVER dispose of batteries in fire, as they may leak and explode.
• ALWAYS remove batteries when exhausted or unused for a long time.
• ALWAYS have an adult install batteries consistent with installation instructions.
• ONLY use batteries specified by manufacturer.
• Batteries are to be inserted with the correct Polarity (+ and -).
• The supply terminals are not to be short-circuited.
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the toy before being charged.
• Rechargeable batteries are only to be charged under adult supervision.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1.This device may not cause interference.
2.This device must accept any interference, including interference that may cause undesired operation of the device.

Read More About This Manual & Download PDF:

References

• Patents - JAKKS Pacific, Inc.
• Home - JAKKS Pacific, Inc.
• Warranty - JAKKS Pacific, Inc.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>