HELLA GUTMANN mega macs PC Bike User Guide

HELLA GUTMANN mega macs PC Bike

About this Quick Start Guide

Translation of Original Operating Instructions
The quick start guide comprises the most important information in a clearly visible form to facilitate the start with the mega macs PC Bike.

Notes for the Use of the Quick Start Guide

This quick start guide contains important information relevant to operator safety.

Go to www.hella-gutmann.com/manualsto find all the manuals, instructions, references and lists about our diagnostic devices, tools and much more.

Please also visit our Hella Academy under www.hella- academy.comand expand your knowledge with various online tutorials and other training courses.

Please read the quick start guide entirely. Pay special attention to the first pages containing the safety instructions. They are provided solely to assure your safety when working with the device.

You are recommended to read the individual work steps in the manual again while working with the device, in order to avoid danger to personnel and equipment or operating errors.

The device shall be operated exclusively by personnel qualified in vehicle engineering. Information and knowledge included in this training is not explained further in this quick start guide.

The manufacturer reserves the right to modify this quick start guide and the device itself without prior notice. We therefore recommend checking for any updates. This quick start guide must accompany the device in case of sale or other transfer.

The quick start guide must be kept for the entire service life of the device and accessible at any time.

Range of Functions

The range of functions of the software may vary depending on the country, the licenses acquired, and/or the optionally available hardware. This documentation may therefore describe functions that are not available on the individual device. Missing functions can be enabled by acquiring a corresponding license subject to charge and/or additional hardware.

Safety Precautions

Safety Precautions – Risk of Injury

When working on the vehicle, there is a risk of injury through rotating parts or rolling of the vehicle. Therefore regard the following:

• Prevent the vehicle from rolling.
• Additionally place gear selector lever of AT vehicles to park position.
• Deactivate the start/stop system to avoid an inadvertent engine startup.
• Connect the PC VCI to the vehicle only when ignition is switched off.
• Do not reach into rotating components when engine is running.
• Do not run cables near rotating parts.
• Check the high-voltage parts for damage.

Safety Precautions for the PC VCI
Observe the following to avoid incorrect handling and injury to the user or destruction of the PC VCI arising from this:

• Protect the PC VCI and the connecting cables from hot parts.
• Protect the PC VCI and the connecting cables from rotating parts.
• Regularly check connecting cables/accessory parts for damage (destruction of the PC VCI due to short circuit).
• Connect the PC VCI exclusively according to user manual.
• Protect the PC VCI from fluids such as water, oil or gasoline. The PC VCI is not watertight.
• Protect the PC VCI from strong impacts and do not drop it.
• Do not open the PC VCI on your own. Only technicians authorized by Hella Gutmann are allowed to open the PC VCI. Warranty and guarantee will be rendered void at any case of unauthorized tampering of the device or if the protective seal is damaged.
• If the PC VCI is not working properly, contact Hella Gutmann or a Hella Gutmann trading partner without delay.

Product Description

Delivery Contents

Checking Delivery Contents
Please check the delivery contents upon receiving your device so that complaints can be issued immediately regarding any potential damage.

Proceed as follows to check the delivery contents:

1. Open the package supplied and check for completeness based on the delivery slip.
   Should you identify any damage to the package, then open the package in the presence of the delivery service and check the PC VCI for hidden damage. Any transport damage to the package supplied and damage to the PC VCI shall be registered in a damage report by the delivery service.

2. Take the PC VCI out of the packaging.
   CAUTION

   • Danger of short circuit due to loose parts in or on the PC VCI
   • Danger of destruction of the PC VCI and/or the automotive electronics
   • Never put the PC VCI into operation if you suspect that there are loose parts in or at the module. In this case please contact the Hella Gutmann repair service or a Hella Gutmann trading partner immediately.

3. Check the PC VCI for mechanical damage and shake it lightly to ensure that there are no loose parts inside.

Intended Use

The mega macs PC Bike software and the PC VCI are systems used for detecting and rectifying faults in automotive electronic systems.
It uses a diagnostic interface to establish a connection to the automotive electronics and to provide access to descriptions of the vehicle system. A lot of this data is transferred from the Hella Gutmann diagnostic database to the PC directly via Internet connection. Therefore, the PC should be permanently online.
The mega macs PC Bike software is not suitable for repairing electrical machines and devices or home electrics. Diagnostic devices from other manufacturers will not be supported.

If the mega macs PC Bike software and the PC VCI is used in a way not authorized by Hella Gutmann the protection of the device may be influenced.
The PC VCI is intended for industrial use. Outside of industrial environments, e.g., in commercial areas or in the centre of a town, radio interference suppression measures may need to be taken.

Using the Bluetooth® Function
The terms of use of the Bluetooth® function may be restricted or prohibited through law or corresponding legal regulations in certain countries.
Observe the provisions in force in the respective country before using the Bluetooth® function.

Connectors

The indicator lights show the operating state of the PC VCI.

4| Micro USB interface for USB cable to USB interface of the PC

Meaning of the Flashing Frequencies

•      No voltage present.

•      PC VCI defective.

LED flashes quickly (1x per sec.).| LED switched off.| •      Update failed.

•      Update invalid.

•      PC VCI defective.

LED flashes slowly (every 3 sec.).| LED switched off.| •      Update failed.

•      Update invalid.

•      PC VCI defective.

LED flashes slowly (every 3 sec.).| LED permanently on with regular brief interruptions.| PC VCI ready for operation.

Installation of the Hella Gutmann Drivers Package

System Requirements of Hella Gutmann Drivers

• Windows 7 SP1 or higher
• Windows administrator rights

Installation of the Hella Gutmann Drivers Package
To obtain all the data about the related vehicle provided by Hella Gutmann, the device requires a permanent online connection and the installed driver package Hella Gutmann Drivers. To keep the connection costs down, Hella Gutmann recommends a DSL connection and a flat rate.

1. Install the Hella Gutmann Drivers on the office or repair shop PC.
   The driver package Hella Gutmann Drivers program is on the supplied HGS data carrier.

2. Connect the device to a web-compatible PC.

Contents of the mega macs PC Bike Software

Diagnostic Functions

• Reading/deleting trouble codes
• Parameter readout
• Actuator tests
• Service reset
• Basic settings
• Codings
• Test function

Installation of the mega macs PC Bike

Supported Operating Systems for the mega macs PC Bike

• Microsoft Windows Vista
• Microsoft Windows 7/8

System Requirements for the mega macs PC Bike

• at least 512 MB free internal memory
• at least 2 GB free hard drive space
• at least 1 free USB port at the PC
• Screen resolution at least 800 x 600

Installing the mega macs PC Bike Software
An installation wizard guides you through the necessary installation steps.
Proceed as follows to install the mega macs PC Bike software:

1. Switch on your PC.

2. Plug in the supplied pen drive (2) into the USB port of the PC.
   The USB drive mega macs PC opens automatically.

3. Click to >Open folder< and start the file mega_macs_pc.exe.
   • You can also open the USB drive as follows: Start > My Computer > mega macs PC.
   The mega macs PC Setup window appears.

4. Select the required language and click >OK<.
   The selection will be saved automatically.

5. Click >Next<.
   A selection window appears.
   A target directory for the mega macs PC Bike files is already suggested. If you wish to have another target directory, you can use the >Search< function to select a suitable directory. At the end of installation, the files will be copied into the selected target directory.

6. Click >Next<.

7. Click >Install<.
   Installation is started.

8. Wait until installation is finished.

9. Click >Finish<.
   A link to the mega macs PC Bike is automatically created on the desktop.

10. Disconnect the pen drive.
    Installation of the mega macs PC Bike software is complete now.

Putting the mega macs PC Bike into Operation

This section gives a description of how to execute and to finish the mega macs PC Bike software as well as all the necessary steps for the first use of the mega macs PC Bike software.

Executing the mega macs PC Bike Software

NOTE

• During initial start-up and after every software update, the software user needs to confirm the general terms and conditions (GTC) of Hella Gutmann Solutions GmbH. Otherwise, certain device functions will be unavailable.
• The first time the device is started you need to confirm also the order processing agreement of the Hella Gutmann Solutions GmbH. It governs the handling of personal data pursuant to the GDPR.
• When starting the device for the first time, you must couple the mega macs PC Bike software with the PC VCI. This requires the mega macs PC Bike to be connected to the PC VCI via USB cable. A Bluetooth® connection is sufficient when starting up in the future.

Proceed as follows to execute the mega macs PC Bike software:

1. Insert the USB cable into the USB port on the PC and the PC VCI.

2. Go to Start > All programs > Hella Gutmann Solutions > mega macs PC and select > mega macs PC. The mega macs PC Bike software can also be executed as follows:

   • Windows 8: Select mega macs PC on the start screen.
   • Windows 7 and lower: Select the mega macs PC shortcut on the desktop.
     The mega macs PC Bike software will be started.
     The general terms and conditions appear.

3. Read the general terms and conditions and confirm them at the end of the text.
   A user selection window appears. The user name is saved for all data stored in the Car History. This enables quicker identification of the mechanic who performed the repair work if a query is subsequently made.

4. Double-click .

5. Enter the user name.

6. Confirm your entry with .

7. Activate the Stay logged in check box if necessary.
   If the Stay logged in check box is activated, you will not need to select a user name when switching on in the future.
   The order processing agreement is indicated.

8. Read the order processing agreement, then confirm it and agree to it at the end of the text.

9. Confirm your entry with .
   The input is saved automatically.

10. Disconnect the USB cable from the PC VCI and PC.

11. Insert the Bluetooth® adapter into the USB port of the PC.
    Once the PC recognized the Bluetooth® adapter the LED becomes blue.
    The main menu appears.

Now you can work with the mega macs PC Bike software.

License Release

NOTE: In order to use the full scope of the purchased licenses you need to connect the mega macs PC Bike software to the HGS server prior to the first start-up.

Proceed as follows to connect the mega macs PC Bike software with the HGS server:

1. Select Contracts under > Settings in the main menu.

2. Select >License<.

3. Call up My licenses with .
   Data download is in progress. Purchased licenses are displayed.

4. Start the mega macs PC Bike software again.
   Now you can work with the mega macs PC Bike software.

Working with the mega macs PC Bike

Symbols
General Symbols

Symbols in the Main Menu

Symbols in the Vehicle Selection Menu

Symbols in the Vehicle information menu

Diagnostics

Precondition for Vehicle Diagnostics
To be able to perform vehicle diagnostics, observe the following:

• The PC VCI is inserted into the vehicle-specific adapter.
• The vehicle-specific adapter is inserted into the vehicle’s diagnostic connector.
• Voltage supply (12 V) of the PC VCI ensured.

Preparing Vehicle Diagnostics
The selection of the correct vehicle is a basic precondition for trouble-free vehicle diagnostics. The mega macs PC Bike software provides assistance to simplify the selection, e.g., indicating the installation position of the diagnostic connector or vehicle identification by VIN.
The following ECU functions are possible in the >Diagnostics< menu:

• Trouble code readout
• Parameter readout
• Actuator tests
• Service reset
• Basic settings
• Codings
• Test function

Proceed as follows to prepare vehicle diagnostics:

1. Insert the Bluetooth® adapter into the USB port of the PC.

2. Start the mega macs PC Bike software.

3. Select the desired vehicle under >Vehicle selection< in the main menu.

4. Diagnostics<

5. Connect the PC VCI to the vehicle’s diagnostic connector.
   Both LEDs of the PC VCI flash. The PC VCI is ready for operation.

6. Select >Diagnostics< in the main menu.
   Now you can select the type of diagnostics.

Performing Diagnostics
Proceed as follows to perform diagnostics:

1. Perform steps 1 to 5 as described in section Preparing Vehicle Diagnostics (Page, Seite, Page, Page, Pagina, Página, Pagina, Strona, Side, Sida, Página, Sayfa, Strana, Oldal, Sivu, Pagina, Strana, and Σελίδα 38).

2. Use to select the requested diagnostic process under Function, Assembly, and System.

3. Observe the information window, note window, and instruction window as applicable.

4. Start the communication with .
   The diagnostic procedure between the mega macs PC Bike software and the PC VCI is realized with Bluetooth®.
   Connection to the PC VCI is established if the symbol changes from black to green.

5. Repair the vehicle. Then clear the saved trouble codes from the vehicle system.

Calling Up Vehicle Information
Here you have an overview of the following vehicle information:
• Car History

NOTE You require an online connection if you wish to access all available information.

Proceed as follows to call up vehicle information:

1. Select >Vehicle information< in the main menu.
2. Select the requested type of information using the symbols.
   Certain types of information may not be available depending on the selected vehicle.

HELLA GUTMANN SOLUTIONS GMBH
Am Krebsbach 2
79241 Ihringen
GERMANY
Phone: +49 7668 9900–0
Fax: +49 7668 9900–3999
info@hella-gutmann.com
www.hella-gutmann.com
© 2022 HELLA GUTMANN SOLUTIONS GMBH

References

• gutmann.com
• Startseite | Trainingsportal
• Hella Gutmann Solutions GmbH: Hella Gutmann Solutions
• Hella Gutmann Solutions GmbH: Manuals

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>