HYTRONIK HBTD8200V/F Bluetooth Receiver Node Instruction Manual
- June 5, 2024
- HYTRONIK
Table of Contents
HYTRONIK HBTD8200V/F Bluetooth Receiver Node
Technical Specifications
- Product type: 10V Receiver Node (Flush mount)
- Mains voltage: 220~240VAC 50Hz
- Rated load: 400VA(Capacitive); 800W(Resistive)
- Max. load (0/1-10V): 50mA
- Stand-by power: <0.5W
- Operation frequency: 2.4 GHz – 2.483 GHz
- Transmission power: 4 dBm
- Range (Typical): 10 ~ 30m
- Protocol: 5.0 SIG Mesh
- Operation temperature: Ta: -20°C ~ +45°C
- Case temperature (Max.): Tc: +75°C
- Storage temperature: -20°C ~ +60°C
- Max. relative humidity: 20 ~ 90%
- IP rating: IP20
- Impulse withstand voltage: 2.5KV
- Duty type: S1
- Insulation material: PTI material group IIIa
- Glow wire: level 3, 850°C
- Protection: Built-in protection provide
- Type of switch: Single load(single-ploe disconnection)
- Insulation: Class II
- EMC standard (EMC): EN55015, EN61547, EN61000-3-2, EN61000-3-3
- Safety standard (LVD): IEC 61058-1, EN 61058-1, IEC 61058-1-2 EN 61058-1-2, AS/NZS 61058.1
- Radio Equipment (RED): EN300 328, EN301489-1, EN301489-17, EN62479
Download the App
Free App for set-up and commissioning 
Dimming Interface Operation Notes
Switch-Dim
The provided Switch-Dim interface allows for a simple dimming method using
commercially available non-latching (momentary) wall switches. Detailed Push
switch configurations can be set on Koolmesh app.
| Switch Function | Action | Descriptions |
|---|
Push switch
| Short press (<1 second)
- Short press has to be longer than 0.1s, or it will be invalid.
| – Turn on/off – Recall a scene
– Turn on only – Exit manual mode
– Turn off only – Do nothing
Double push
| – Turn on only – Exit manual mode
– Turn off only – Do nothing
– Recall a scene
Long press (≥1 second)
| – Dimming
– Colour tuning
– Do nothing
Simulate sensor| /| – Upgrade a normal on/off motion sensor to a Bluetooth controlled motion sensor
Installation
Warnings:
- Installation must be carried out by a qualified engineer in accordance with local regulations.
- Disconnect power supply before installing.
- Ensure environmental conditions are suitable for electronic equipment.
Additional Information / Documents
- To learn more about detailed product features/functions, please refer to www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product Functions
- Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Bluetooth Products – Precautions for Product Installation and Operation
- Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Sensor ->Receiver Nodes
- Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>