TESLA BL510BWS Table Blender User Manual

TESLA BL510BWS Table Blender User Manual

IMPORTANT SAFETY INSTRUCTIONS

• Read all instructions carefully before you use the appliance.
• Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.
• This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
• Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• Care shall be taken when handling the sharp cutting blades, emptying the bowl and during cleaning.
• Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use.
• This appliance is intended to be used in household and similar applications such as:
  • staff kitchen areas in shops, offices and other working environments;
  • farm houses;
  • by clients in hotels, motels and other residential type environments;
  • bed and breakfast type environments.
• WARNING: Risks of injuries if you don’t use this appliance correctly.
• Ensure fingers are kept well away from the blades when in use.
• Do not blend hot ingredients.
• Always operate on a flat surface.
• Ensure the control dial is in the off ‘0’ position before plugging into the power outlet.
• Do not operate for more than 2 minutes at a time.
• Read carefully and save all the instructions provided with an appliance.
• Always turn the power off at the power outlet before you insert or remove a plug. Remove by grasping the Plug, do not pull on the cord.
• Do not use your appliance with an extension cord unless this cord has been checked and tested by a qualified technician or service person.
• Always use your appliance from a power outlet of the voltage (A.C. only) marked on the appliance.
• Do not use an appliance for any purpose other than its intended use.
• Do not place an appliance on or near a hot gas flame, electric element or on a heated oven. Do not place on top of any other appliance.
• Do not let the power cord of an appliance hang over the edge of a table or bench top or touch any hot surface.
• Do not operate any electrical appliance with a damaged cord or after the appliance has been dropped or damaged in any manner.
• Do not immerse the appliance in water or any other liquid unless recommended.
• Never touch the blades while the machine is plugged in.
• Take special care when emptying and cleaning the blender jar, as the blades are extremely sharp.
• Regarding the instructions for cleaning surfaces in contact with food, thanks to refer to the section “Care and Cleaning”.
• Regarding the operating times, thanks to refer to the section “A Guide to Your Blender”.

IDENTIFICATION OF PARTS

1. Filling funnel
2. Small measuring cup
3. Jar lid
4. Glass jar (1500ml)
5. Removable Blade assembly
6. Main body (also motor base)
7. Turbo button
8. Plug & power cord
9. Speed control knob
10. Foot pad

FITTING FOR THE BLENDING JAR ASSEMBLY

1. Align the small projecting rib on the measuring cup and the caved position on the Jar lid, insert the Small measuring cup (2) into the Jar lid (3). (FIG 1).
   

2. Turn the measuring cup anticlockwise until you hear a slight click. If this is the case, the measuring cup is locked correctly.

3. Put the Jar lid assembly on the Glass Jar.

4. Ensure that the Removable Blade assembly is mounted firmly onto the Glass jar (for the assembling or disassembling, refer to chapter ‘Care and Cleaning’).

5. Place the Glass jar assembly on the main body and rotate clockwise ( FIG 2) in the direction of the arrow to lock firmly. See also chapter ‘Safety locking system’.
   

6. Insert the Filling funnel into the Glass jar through the hole of the measuring cup.

7. Now the blender is ready for use.

USING YOUR BLENDER

1. Remove the Jar lid or the Small measuring cup from the Glass jar and place ingredients into the jar. Do not exceed the maximum indicated level of 1200ml.
2. Place the Jar lid with the measuring cup back onto the Glass jar.
3. Use the Speed control knob to select the desired blending speed1, 2, Pulse or Turbo.
4. The Pulse function remains on as long as the Speed control knob is turned to the position of “Pulse”, for greater control when blending, e.g. crushing ice.
5. Setting 1 and 2 will provide continuous blending until the Speed control knob is turned to the ‘0’ position.
6. While using the setting 1 and 2, pressing the Turbo button all the way can increase to the maximum speed.
7. You can add further ingredients while blending through the hole of the measuring cup or the Filling funnel (especially for a small amount of liquid mixture).
8. After you have completed blending, turn the Speed control knob to the ‘0’ position.

SAFETY LOCKING SYSTEM

With safety in mind, unless the blending jar is positioned correctly and locked in place, the blender will not operate.

For correctly assembling the blender, operate as follows:

1. Place the main body on the table, with the front facing toward you.
2. Place the Glass jar assembly onto the main body, turn the Glass jar to the clockwise until you hear a slight click. If this is the case, the Glass jar is locked correctly.
3. Now the blender is ready for use.

A GUIDE TO YOUR BLENDER

Max. time for Max. ingredients: 120 seconds

Suggested Blending Quantities/Processing Time

Ingredients

| Quantity(g)| Time(seconds)| Speed Setting
---|---|---|---
Cream| 200-400g| 50-60s|

2

Note: only for cream, at 4-8ºC.

Suggested Blending Quantity/Processing Time/Operating Speed

Processing Task

| Ingredients| Quantity(g)| Time(seconds)|

Speed Setting

---|---|---|---|---
Vegetable puree| Carrots| 20-100g| 30-40s| 2
Potatoes| 20-100g
Onions| 20-100g
Water| 70-200g
Carrot pieces| Carrots| 480g| 120s| 2
Water| 720g
Fruit smoothie| Fruit slices| 200g| ≤120s| 2
Ice cubes| 50g
Yoghourt /Milk| 100g
Processing Task| Ingredients| Quantity(g)| Time(seconds)| Speed Setting
Milk shake| Milk| 100-200ml| 30-50s| 1, 2
Vanilla ice cream| 100-200g
Bananas| 1/4-1/2 pcs
Chocolate syrup| 30-60g
Leek-potato soup| Potatoes| 150g| 60-90s| 1, 2
Leeks| 150g
Water| 300g
Pancakes (paste)| Flour| 170g| 60-90s| 1, 2
Edible salt| 8g
Eggs| 3pcs
Milk| 260ml
Water| 240ml
Butter| 50g
Crushing ice| Ice cubes| 200g| On: 3sec, Off: 3 sec Repeat: 7-10 times| PULSE
On crushing: Max. quantity: 200g (size: 25 x 25 x 25mm). Max operating time: 50seconds
Ice slush| Ice cubes| 200g| Max operating time: 90 seconds| PULSE, 2
Water| 600g
On crushing ice with water: Max. quantity: ≤800g (Ice to water : 1:3)

ATTENTION! Times for processing will vary with the quantity in the Glass Jar, these times are only a guide.

HANDY BLENDING HINTS

• A brief whirl in the blender will rescue lumpy gravy, or an eggs-based sauce that has separated.
• Food items for blending should be cut into cubes (approximately 2-3cm), this will assist in achieving an even result.
• Never fill the Glass jar above the “1200ml” level indicated.
• When pureeing fruit or vegetable, cooked or raw, cut into small pieces to facilitate blending.
• When blending a variety of ingredients together, blend the liquids first, then add dry ingredients.
• Always ensure stones are removed from fruit and bones from meat as these can harm the blades.
• Do not process hot liquids in your blender. Allow to cool before processing.
• Always ventilate the Glass jar when pureeing warm ingredients. This is achieved by lifting the measuring cup out of the lid, after starting the blender.

CARE AND CLEANING

Quick cleaning method

1. Half fill the blender with warm and a small amount of detergent.
2. Turn to the ‘Pulse’ function and hold for 1-2 seconds and release. Repeat 3-4 times.
3. Then remove the Glass jar and rinse it under running water.
4. For thorough cleaning, wash the Jar lid, Small measuring cup, Filling funnel and Glass jar in warm soapy water.
5. The disassembling for the Removable Blade assembly: Place the Glass jar with the Removable Blade assembly upwards; grasp the projecting rib on the blade base to unlock in the direction of the arrow of “open” and take the blade base out from the Glass jar.
6. Rinse the disassembled Blade base and Sealing ring under running water.
7. Allow all the parts to dry off; then refit the clean parts according to the reverse of removal.
   Don’t forget to reattach the sealing ring.

Caution: Take care when cleaning the blades as they are extremely sharp.
Note: Do not clean any part of the mentioned above in the dishwasher.

To clean the motor base

Use a damp, soft sponge with detergent and wipe over the motor base.
Note: Never immerse the motor base in water.

Storage

1. Coil the power cord around the cord storage at the bottom of the motor base.
2. Store in a cool and dry place

TECHNICAL SPECIFICATION

• Voltage: AC 220V – 240V~
• Frequency: 50Hz/60Hz
• Power: 500W
• Capacity: 1.5L

Correct Disposal of this product:

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased, they can take this product for environmental safe recycling.

tesla.info

References

• Tesla.info | Technology for all

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>