ZENEC ZE-RVSC90 Rear View Camera Instruction Manual
- June 5, 2024
- ZENEC
Table of Contents
ZENEC ZE-RVSC90 Rear View Camera
OVERVIEW
KEY FEATURES
- A compact high-resolution rearview camera
- LDR-controlled day/night mode with 9-night vision IR-LEDs
- User switchable picture inversion (mirror image)
- 3 m main wire harness length with 6PIN connector system – incl. 15m extension cable
- Mounting brackets for 38 mm or 60 mm mounting clearance are included in the set
- Powder-coated aluminum die-cast housing
DESCRIPTION
This ZENEC rearview camera model has been developed for use with motorhomes, camper vans, and trailers. The use of high-quality parts and materials for best weather resistance and longevity, as well as the clever construction according to IP69K protection class allow for a perfect operation in the aforementioned target vehicles. The ZE-RVSC90 offers a large horizontal viewing angle and can be operated in inverted or non-inverted picture mode to comply with a great variety of RVC monitors and head units. This product is compatible with a wide variety of 2-DIN A/V receivers of the aftermarket and the ZENEC E>GO product line up, including ZENEC 2-DIN infotainers and naviceivers.
| Image device: | ⅓” / 8.5 mm Sharp CCD sensor |
|---|---|
| Lens focal length: | f2.3 |
| TV system: | NTSC / 60 Hz |
| View angles: | 150°(D) x 105°(H) x 80°(V) |
| Native sensor resolution: | 811 (H) x 507 (V) pixels |
| Resolution of video-out: | > 600 TV lines |
| Signal to noise ratio: | > 51 dB |
| Light sensitivity: | 0.3 Lux (IR On) |
| Video output: | 1,0 Vp-p, 75 ohms |
| White balance: | Auto |
| Gain control: | Auto |
| Sync system: | Auto |
| Power supply: | DC 12 V (10 V – 16 V) |
| Current consumption: | 130mA (DC12V) / ≤ 1.5W |
| IP protection rating: | IP69K |
| Operating temperature: | -20°C~+70°C, RH 95% max. |
| Dimensions short bracket (HxWxD): | 74 x 85 x 65 mm |
| Dimensions w/long bracket (HxWxD): | 101 x 85 x 65 mm |
| Weight: | 333 g |
NOTES
- Following the latest trend in vehicle electronics, newer cars mainly use a pulse width modulated power feed for outer hull lights, which is unsuitable for imaging/video electronics, as it causes considerable picture distortion.
- Use the included connection cable exclusively. Altering or replacing it will void your warranty.
- The camera is 100% water- and dustproof and has been tested according to international standard IP69K. However, cleaning your vehicle with a high-pressure washer may damage the housing sealings.
- Keep a distance of at least one meter between the water nozzle and camera housing.
ADREES
ZENEC by ACR AG
- Bohrturmweg 1 ∙ CH-5330 Bad Zurzach ∙ Switzerland
- EU Legal Representative: ACR S & V GmbH ∙ Industriestr. 35 ∙ D-79787 Lauchringen Germany
- www.zenec.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>