ADLER AD 2941 Trimmer User Manual

AD 2941 Trimmer
User manual

GENERAL SAFETY CONDITIONS

IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different if the device is used for commercial purposes.

1. Before using the product please read carefully and always comply with the following instructions.
   The manufacturer is not responsible for any damages due to any misuse.

2. The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.

3. Please be cautious when using children. Do not let the children play with the product. Do not let children or people who do not know the device use it without supervision.

4. WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children unless they are over 8 years of age and these activities are carried out under supervision.

5. Never put the whole device into the water. Never expose the product to atmospheric conditions such as direct sunlight or rain, etc… Never use the product in humid conditions.

6. Never use the product if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defective product yourself because it can lead to electric shock. The damaged device is always turned to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.

7. Do not touch the device with wet hands.

8. Batteries may leak when exhausted or not used for a long time. In order to protect the device and your health, replace it regularly and avoid skin contact with leaking batteries.

9. The device should be turned off each time it is put aside.

10. The device is intended only for cutting natural human hair.

11. To remove hair from inside the clippers, use only the supplied brush.

12. The cutting blades are extremely sharp. Use caution when assembling, disassembling, and cleaning. Do not touch the moving blades during operation!

13. Do not wash the blades in the water.

14. Only change attachments when the device is turned off.

15. Use only original accessories.
    

(1) – head with shaving foil
(2) – trimmer
(3) – skin stretcher strip
(4) – foil release switch
(5) – shaving head| (6) – on / off switch
(7) – battery compartment cover with a hook
(8) – bikini comb
(9) – cleaning brush
---|---

BATTERY REPLACEMENT
Open the battery compartment cover (7) by turning it anti-clockwise. Take out the old batteries and insert new ones paying attention to the indicated polarity. Close the battery compartment.

USING THE DEVICE
The appliance is suitable for use under the shower, but you can also use it dry. Do not use it with creams. If you want to use creams or body lotion, apply them after you have used the appliance.

1. Place head with shaving foil on your skin (1). Be sure that the head with shaving foil (1) touches the skin evenly.
2. Turn on the shaver by moving the on/off switch up (6).
3. Move the appliance slowly against the direction of hair growth.
4. When you use the appliance on sensitive areas, stretch the skin with your free hand. When you use the appliance on your underarms, raise your arm and put your hand on the back of your head to stretch the skin.

Note: When you use the appliance to trim hair, use it dry for the best result.
PROTECTIVE FOIL PLACEMENT/REMOVAL

1. Make sure the device is turned off. Turn off the shaver by moving the on/off switch down (6).
2. In order to remove the protective foil slide the release switch (4) to the right.
3. Hold the switch and take off the head with shaving foil (1).
4. Release the switch.
5. In order to place the protective foil back. Slide the release switch to the right. Hold the switch and put the shaving foil on the blades. Press carefully to hear the click sound. Release the switch to block the head.

CLEANING AND STORAGE

1. Make sure the device is turned off. Turn off the shaver by moving the on/off switch down (6).
2. Use the cleaning brush to brush away any hair that has collected under the trimmer (2) of the shaving head (6).
3. Remove the shaving foil (1) (read point PROTECTIVE FOIL PLACEMENT/REMOVAL) to clean around the blades.
4. Twist off the shaving head (5) to clean underneath.
5. Clean all parts of the shaving head with the cleaning brush, except the shaving foil.
6. Rinse the head with shaving foil. Then shake firmly to remove water drops.
7. Let all parts dry completely.
8. Place the head with shaving foil back (1) onto the shaving head (5).

USING THE BIKINI COMB
Put the bikini comb (8) onto the shaving head (5). Press gently to hear the click sound. Turn on the shaver by moving the on/off switch up (6).
TECHNICAL DATA: Battery: 2xAAA (1.5V)
Please transfer cardboard packaging to waste paper. Pour the polyethylene bags (PE) into the plastic container
A worn device should be returned to the appropriate point storage because it is dangerous in the device ingredients and may pose a threat to the environment. The electrical device should be handed over to limit its reuse and use. If in the device there are batteries you have to take them out and give them to the point stored separately.

AFTER-SALE SERVICE NOTICE
If you want to buy spare parts or make any complaints, please contact the seller who issued the receipt directly.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>