neo 07508L Intelligent Friendly Light User Manual
- June 5, 2024
- NEO
Table of Contents
USER MANUAL
MAIN FUNCTION
– This kit includes one WiFi water timer and one Wifi gateway
– One gateway can pair with max 4 Wifi water timers
– 433mHz RF communication with Wifi gateway and Water Timer
– The Wifi gateway can be used as Wifi timer socket
– Set and Check Irrigation Schedule through a smartphone APP
– The Wifi controller compatible with a soil moisture sensor
– Delay the watering schedule base on the data from soil sensors
– Manually rain delay function
– One Wifi timer can connect 1 rain sensor and 1 soil moisture sensor
– Manually watering
– Water flow meter function
– With Irrigation mode and Mist mode options for watering
– Low power indicator
– Build-in filter
TECHNICAL SPECIFICATIONS
-
1” BSP or 3/4” NH inlet
-
3/4” outlet thread
-
Working pressure:0.5bar to 8bar(10PSI-120PSI)
-
Max flow:5L/min to 35L/min
-
Waterproof: IP54
-
Working temperature 0℃to 50℃(37°F-122°F)
-
Battery life over 1 year
-
Wifi timer powered by 4 AA batteries, Wifi gateway powered by AC power
-
Irrigation Mode: Watering frequency: every day or any day
Watering times: max 3 times per day
Watering duration: from 1min to 11 h 59 m -
Mist Mode: Mist Period: 1min to 11h 59m
Mist Working time: 5s to 59s
Max interval time:15min 59s
IMAX NEO PRO APPLICATION
- Search “Control Master” in the App store/Google Play, download, and install.
- Scan this QR code to download directly, and install
- You’ll need to register an account on your Control Master App before you connect your WiFi smart water timer.
https://smartapp.tuya.com/immaxneosmart
ADD WIFI WATER TIMER
-
You will see a new device in the Imax NEO PRO app: the Irrigation Hub. Click on this icon and then on the Manage added devices icon. Select Other sensors from the list
of devices. Press the button on the irrigation valve for at least 10 seconds. The button should start flashing. Then confirm in the app that the button is flashing and wait for the device to be added to the app. The Wifi outlet device and the Sprinkler Timer will then appear in the app. Note: The “Wifi outlet” icon is used to control the power on/off of the outlet. Even if the power outlet is turned off, the Irrigation System Gateway functions are still active. -
You can add a maximum of 4 Irrigation System Timers to one Irrigation System Gateway.
-
A new device will appear in the Imax NEO PRO app. Click on this icon and then on the Manage added devices icon. Select Other sensors from the list of devices. Press the button on the irrigation valve for at least 10 seconds. The button should start flashing.
Then confirm in the app that the button is flashing and wait for the device to be added to the app. The Wifi outlet device and the Sprinkler Timer will then appear in the app.
Note: The “Wifi outlet” icon is used to control the power on/off of the outlet. Even if the power outlet is turned off, the Irrigation System Gateway functions are still active. -
One Wifi gateway can add a max of 4 Wifi water timers, please repeat the above steps to pair with other water timers.
PRODUCT OPERATION OF WIFI WATER TIMER
-
Click the Wifi water timer icon, user can rename the device, APP will display paired device and connection status, and the current weather forecast.
-
Manual mode: Click the “irrigation control” on APP, user can manually turn ON/OFF the water timer and set the manual start time.
Tips: The communication delay will be around 0.5seconds to 1 second, please do not repeatedly press the button -
Plan setting: Click the “Plan” button, user can set a daily irrigation schedule and rain delay plan.
The Irrigation schedule is including two modes: Irrigation mode or Mist Mode, max 3 plans per day
Figure one shows irrigation mode; watering for 20 minutes. The start time is 10 AM every day.
Figure two shows mist mode; spray for 30 seconds every 5 minutes, and the duration time is 4 hours. -
Rain Delay Function: Rain delay can be set 24 hrs, 48 hrs, or 72 hrs during rainy days or the soil moisture index is high.
RESET DEVICE
To reset the Smart Irrigation Gateway, press and hold the button for at least
10 seconds. The button should then start flashing.
Press the left button on the irrigation valve for a min. of 10 seconds. The
button should then start flashing.
SENSOR FUNCTION
- Users can connect additional sensors to monitor the soil moisture, when the soil moisture is high, the water timer will stop watering.
- The water timer has its own water flow monitoring function, and users can track their daily water consumption.The minimum monitoring water flow is 25 L / H
AUTO RUNNING
- After setting the watering plans, the water timer will start watering following the schedules. Users can check the working status on the APP.
OTHERS
- Please make sure the distance between Wifi gateway and Wifi water timer is within 60 meters.
- The Wifi gateway also can be used as a Wifi control socket.
a) Click the “Wifi socket” icon on the home page, the user can remote control the socket.
b) User also can set a timer schedule to on/off the power of the socket.
Safety Information
CAUTION: Keep out of reach of children. This product contains small
parts, which may cause suffocation or injury if swallowed.
WARNING: Every battery has the potential to leak harmful chemicals that
can damage skin, clothing, or the area where the battery is stored. To avoid
the risk of injury, do not allow any substance from the battery to come into
contact with the eyes or skin. Every battery may burst or even explode if
exposed to fire or other forms of excessive heat. Take care when handling the
batteries. To reduce the risk of injury from mishandling the batteries, take
the following precautions:
– Do not use different brands and types of batteries in the same device
– When replacing the batteries, always replace all the batteries in the device
– Do not use rechargeable or reusable batteries.
– Do not allow children to insert batteries without supervision.
– Follow the battery manufacturer’s instructions for proper battery handling
and disposal.
CAUTION: The product and batteries should be disposed of at a recycling
center. Do not dispose of them with normal household waste.
CAUTION: To ensure the safe use of the product, wires must be brought to
the installation site according to valid regulations. The installation must
only be carried out by an individual with the appropriate certification in the
field of electronics. During installation or when a fault is detected, the
power cable must always be disconnected from the socket (in the case of direct
connection, the relevant circuit breaker must be switched off). Improper
installation can damage the product and cause injury.
CAUTION: Do not disassemble the product, electric shock may occur.
CAUTION: Use only the original power adapter provided with the product.
Do not operate the device if the power cord shows signs of damage.
CAUTION: Follow the instructions in the enclosed manual.
Maintenance
Protect the device from contamination and soiling. Wipe the device with a soft
cloth, do not use rough or coarse materials.
DO NOT USE solvents or other aggressive cleaners or chemicals.
A Declaration of Conformity has been issued for this product. More information
can be found at www.immax.cz
Manufacturer and importer:
IMMAX, Pohoří 703, 742 85 Vřesina, EU |
www.immaxneo.cz |
www.immaxneo.com
Made in P.R.C.
References
- Velkoobchod s LED technikou IMMAX | Immax.cz
- Velkoobchod s LED technikou IMMAX | Immax.cz
- Velkoobchod s LED technikou IMMAX | Immax.cz
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>