EPOMAKER EP84 User Guide: Customize RGB, Pair Wireless & More
- June 5, 2024
- EPOMAKER
Table of Contents
The EPOMAKER EP84 Wired and Wireless Mechanical Keyboard is a versatile and customizable keyboard that offers both wired and wireless connectivity options. This keyboard features an 84-key layout, PBT keycaps, and NKRO (N-Key Rollover) functionality, making it a great choice for gamers and typists alike. The keyboard also comes with customizable RGB lighting effects, allowing users to personalize their keyboard to their liking. The EPOMAKER EP84 comes with a user guide that provides instructions on how to use the keyboard’s various features, including how to pair the keyboard with Bluetooth devices and how to customize the RGB lighting effects. Additionally, the user guide provides instructions on how to replace keycaps and switches, as well as technical assistance information and warranty details. For more in-depth customization software guides, users can refer to the manual available on the official epomaker website. If users require further assistance, they can contact support@epomaker.com for technical assistance.
EPOMAKER EP84 Wired and Wireless Mechanical Keyboard
80% Hot-Swap Wired/Wireless Mechanical Keyboard This Quick Guide is an introduction to the use and functionality of the EPOMAKER EP84. For in-depth guide of functionality of the customization software please refer to the manual that you can find in the official epomaker website at https://epomaker.com/pages/software-downloads Should you require more assistance please email us at support@epomaker.com ABOUT PRODUCT
- MODEL: EPOMAKER EP84
- SIZE: 315 x 120.5 x 27mm
- WEIGHT: 725g ± 20g
- NKRO: Yes
- LAYOUT: 84 Keys
- KEYCAPS: PBT
- SYSTEM: Windows / Mac
- CONNECTION
- HOTSWAP: YES
- USB-C, 2.4GHz Bluetooth 3.0, Bluetooth 5.0.
SHORTCUTS
CHANGE RGB EFFECTS
Pressing FN+Pause at the same time allows you to switch the RGB effect ofyour EP84 Keyboard. PAIRING BLUETOOTH
- FN+1/2/3Long Press for 3 seconds to pair Bluetooth devicee
- FN+1/2/33 Short Press to switch to last paired device
Long press the FN+1/2/3 for 3 seconds, the keyboard will start pairing and the light will flash. Ifthere’s no connection, the keyboard will enter into sleep mode.
PAIRING WIRELESS 2.4GHz
FN+4Switch to Wireless Mode Firstly, turn on the keyboard via the switch
on the keyboard’s bottom. Then plug the receiver into your device. After being
recognized by your device, press FN+4, you will see the 4 key’s backlit
flashes. When the LED stays on the green, the pairing is successfully done.
BLUETOOTH & WIRELESS 2.4GHz SPECIFICATIONS Operating system should be
windows 8 or above to support the Bluetooth function. The device should
support Bluetooth 5.0 or a higher version to use Bluetooth 5.0. KEYBOARD
SHORTcUTS If you switch devices and/or systems, please make sure to press
FN+A/S to switch the keyboard layout according to the system you used, or some
shortcuts/multimedia keys may not work properly. KEYBOARD WAKE UP SLEEP If
your keyboard is sleeping press any key to wake it up, it will remember the
last device connected.
REPLACING KEYCAPS AND SWITCHES For a
full guide on how to remove keycaps and switches scan the QR Code or type in
your browse https://epomaker.com/blogs/guides/diy-guide-how-to-remove-and-
replace-your-mechanical-keyboard-switches
Before
installing switches, be sure the pins are clean and straight. 
Push Straight Down
- Please be gentle. Be sure the pins are aligned with the slots.
- Before installing switches, be sure the pins are clean and straight.
Remove Switches
- Grab your Switch Removal Tool and align the gripping teeth vertically (on the Y-Axis) at the center of the switch, as shown in the example graphic above.
- Grab the switch with the Switch Puller and apply pressure until the switch releases itself from the plate.
- Using firm but gentle force pull the switch away from the keyboard using a vertical motion.
Install Switches
- Check that all the switch metallic pins are perfectly straight and clean.
- Align the switch vertically to have the Gateron logo facing north. The pins should align themselves to the keyboard PBC.
- Press the switch down until you hear a click. This means your switch clips have attached themselves to the keyboard plate.
- Inspect the switch to ensure it’s properly attached to your keyboard, and test it.
Note: If the key doesn’t work its possible you may have bent one of the switches while installing it. Pull the switch out and repeat the process. Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacing keycaps or switches. If you cannot remove or install keycaps or sWitches please contact customer service as soon as possible to avoid damage to the keyboard due to operating errors.
TECHNICAL ASsISTANCE
For technical assistance, please email to support@epomaker.com with your purchase order number anda detailed description of your issue. We normally respond to enquiries within 24 hours. If you purchased your keyboard from a distributor or not from an official store of Epomaker, please contact them directly for any additional help. COMMUNITY FORUMS Join our community and learn together with other keyboard enthusiasts. https://discord.gg/2q3Z7C2 https://www.reddit.com/user/epomaker/ WARRANTY EPOMAKER’s Warranty covers any factory defects that might affect the proper functionality of your purchase. It doesn’t cover any damage that may occur from normal wear and tear. If your product is defective we will send you a replacement unit. Replacement units might require you to send the defective unit back to Epomaker. We provide a 1 year warranty for our products when bought from our website (EPOMAKER.com). Your item will not be covered by your 1 year warranty if the inspection shows any sign of modification or changes unsupported by the original product, these include: Changing internal components, Assembling and reassembling the product, Replacing Batteries, etc. We will ONLY cover the item if it is bought from our official stores. You do not have a warranty with us if you bought the item from another reseller or likewise. Please contact the store that you bought your product from to resolve issues. Made in China.
- Manufacturer: Shenzhen Changyun Technology Co., Ltd.
- Address: Seventh Floor, Kai Daer Building, No.168 Tongsha Road,
- Xili Street, Nanshan Disctrict, Shenzhen,Guangdong, CN
- Email: support@epomaker.com
- Web: www.epomaker.com
APEX CE SPECIALISTS LIMITED
- Address: UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD CORK, T23 AT2P, IRELAND
- Contact: Wells
- Tel: +353212066339
- Email: info@apex-ce.com
SPECIFICATIONS
| Model | EPOMAKER EP84 |
|---|---|
| Size | 315 x 120.5 x 27mm |
| Weight | 725g ± 20g |
| NKRO | Yes |
| Layout | 84 Keys |
| Keycaps | PBT |
| System | Windows / Mac |
| Connection | HOTSWAP: YES USB-C, 2.4GHz Bluetooth 3.0, Bluetooth 5.0. |
FAQS
What is the EPOMAKER EP84 keyboard?
The EPOMAKER EP84 is a wired and wireless mechanical keyboard with an 84-key layout, PBT keycaps, and NKRO functionality.
Can I customize the RGB lighting effects on the EPOMAKER EP84?
Yes, you can customize the RGB lighting effects by pressing FN+Pause at the same time.
How do I pair my Bluetooth device with the EPOMAKER EP84 keyboard?
Long press the FN+1/2/3 for 3 seconds, the keyboard will start pairing and the light will flash. If there’s no connection, the keyboard will enter into sleep mode.
How do I pair my wireless 2.4GHz device with the EPOMAKER EP84 keyboard?
Firstly, turn on the keyboard via the switch on the keyboard’s bottom. Then plug the receiver into your device. After being recognized by your device, press FN+4, you will see the 4 key’s backlit flashes. When the LED stays on the green, the pairing is successfully done.
How do I replace keycaps and switches on the EPOMAKER EP84 keyboard?
For a full guide on how to remove keycaps and switches, scan the QR Code or type in your browser https://epomaker.com/blogs/guides/diy-guide-how-to- remove-and-replace-your-mechanical-keyboard-switches. Before installing switches, be sure the pins are clean and straight.
What should I do if a key doesn’t work after replacing a switch on my EPOMAKER EP84 keyboard?
If a key doesn’t work, it’s possible that you may have bent one of the switches while installing it. Pull the switch out and repeat the process. Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacing keycaps or switches. If you cannot remove or install keycaps or switches, please contact customer service as soon as possible to avoid damage to the keyboard due to operating errors.
How do I contact technical assistance for the EPOMAKER EP84 keyboard?
For technical assistance, please email to support@epomaker.com with your purchase order number and a detailed description of your issue. We normally respond to enquiries within 24 hours.
What is the warranty for the EPOMAKER EP84 keyboard?
EPOMAKER’s Warranty covers any factory defects that might affect the proper functionality of your purchase. It doesn’t cover any damage that may occur from normal wear and tear. We provide a 1 year warranty for our products when bought from our website (EPOMAKER.com)). Your item will not be covered by your 1 year warranty if the inspection shows any sign of modification or changes unsupported by the original product. Please contact the store that you bought your product from to resolve issues.
References
- ce.com
- Epomaker
- Epomaker
- DIY Guide: How to Replace Your Mechanical Keyboard Switches
- Software
- Reddit - Dive into anything