eve ROOM-003 Room Indoor Air Quality Monitor User Guide
- June 5, 2024
- eve
Table of Contents
BackCover with Sticker Placement
Room …………………………………………..
Notes …………………………………………..
Get started
1
To activate Eve Room, connect it to a standard USB power supply (5 V, at least
500 mA) via the included USB cable. This can be your iPhone’s power adapter,
for example.
When battery levels are low and during charging, Eve Room will stop measuring air quality. It takes approximately 2 hours to fully charge Eve Room.
2
Download the Eve app from the App Store.
3
Open the Eve app and tap Add Accessory. Eve will now guide you through the
setup process.
If you have already set up another accessory, go to Settings in Eve to add Eve Room to your home.
Enjoy
Access Eve Room using the Eve app, the Home app, and Siri.
View air quality, temperature and humidity
Review past conditions by day, month, or year
Rules
Install firmware updates
View air quality, temperature and humidity
Configure guest access
Ask for air quality temperature and humidity
Securely access Eve Room while you’re away from home and set up powerful automations. Any Apple TV HD, Apple TV 4K or HomePod using the same ‘Cloud account as your iPhone will automatically serve as a home hub, no further setup required.
No Eve Cloud No Registration No Profiling
Eve is designed to safeguard your personal data All data is fully encrypted and only transferred directly between your Eve Room and iPhone, iPad or home hub. Learn more at evehome.com/privacy
Touch the capacitive controls to cycle through displays.
Air quality is influenced by numerous environmental factors that are unique to every home. Eve Room will automatically adjust to your home throughout its first day of operation, during which time air quality measurements may appear irregular.
Legal Information
This device complies with part 15 of the FCC Rules and Industry Canada
licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) This device may not cause interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, you are encouraged to try to correct the interference by one or more of
the following measures: reorient or relocate the receiving antenna increase
the separation between the equipment and receiver; consult the dealer or an
experienced radio/TV technician for help. This Class B digital apparatus
complies with Canadian ICES-003.
This equipment complies with FCC BF and IC ASS-102 radiation exposure limits
set forth for an uncontrolled environment. This equipment should be installed
and operated with a minimum distance of 0.5 centimeters between the radiator
and your body. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter. The antennas used for this
transmitter must be installed to provide a separation distance of at least 0.5
cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.
Changes or modifications not expressly approved by Eve Systems could void your
authority to operate this device. Purpose of control: operating control;
construction of control: plug-in operating control; type 1 action, operating
time: continuous.
For questions about compliance with FCC regulations, please contact: Compliance Officer, Eve Systems, 100 Pine St., Suite 1250, San Francisco CA 94111, USA.
Hereby, Eve Systems declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EC. The declaration of conformity is available at www.evehome.com/doc
Frequency range: 2402 – 2480 VHz (BLE) / 2405 — 2480 MHz (Thread); max. EIRP:
10 dBm
Product: 10EBX9901 • Model: 20EBX9901 • Part: 51EBX9901
FCC ID: SNE-ROOM-003 • IC 11192A-ROOV003
Reset
4
Simultaneously touch both capacitive controls until the reset icon appears on
the display. Then press the Reset button on the back of Eve Room within 30
seconds.
Please keep your HomeKit Setup Code in a safe place. You need it to securely add Eve to your home, and nobody but you has a copy.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>