KREAFUNK AMAJOR Premium Bluetooth Speaker User Manual
- June 6, 2024
- KREAFUNK
Table of Contents
KREAFUNK AMAJOR Premium Bluetooth Speaker
SAFETY AND MAINTENANCE INSTRUCTIONS
- Please read this operation manual carefully before use.
- The safety and maintenance instructions in this operation manual should be retained for future reference and must be followed at all times.
- Keep the product away from heat sources such as radiators, heaters or other appliances that produce heat.
- Do not expose the product to direct sunlight for longer periods. High temperatures will shorten the life of the product, destroy the battery and distort certain plastic parts.
- Do not expose the product to extreme cold as it may damage the internal circuit board.
- Avoid liquids getting into the product.
- Do not throw with or stamp on the product. This may damage the internal circuit board.
- Do not try to disassemble the product. This must only be done by a professional.
- Do not use concentrated chemical products or detergent to clean the product.
- Keep the surface away from sharp things, as these may cause damage to the plastic parts.
- Use 5V / 1A power supplies only. The connection of power supplies with higher voltage may lead to severe damage.
- Do not arbitrarily discard or place the lithium battery near fire or intense heat in order to avoid a risk of explosion.
If you do experience any problems with your product please contact the retailer you purchased the product from. The retailer will provide you with guidance and if that does not solve the problem the retailer will handle the claim directly with KREAFUNK.
BLUETOOTH® PAIRING ****
Press the ON/OFF button to turn aMAJOR on. The LED indicator will light up white and a sound prompt is heard.
When the LED indicator on aMAJOR starts flashing white, make sure Bluetooth on your device is turned on. Find the list of visible/connected units on your device and select “aMAJOR”. The LED indicator will turn solid white, a sound prompt is heard and aMAJOR is ready to play.
MANUAL BLUETOOTH® PAIRING MODE
aMAJOR will always re-connect to last connected device, when turned on. If you wish to connect a new device, you can manually activate Bluetooth® pairing mode: Press the Bluetooth button to activate Bluetooth pairing mode. The LED indicator will flash white and you can now pair aMAJOR with a new device. You can have up to 2 devices paired with aMAJOR simultaneously.
MULTI-FUNCTIONS ****
BATTERY AND CHARGING
CHARGING
Charging time is approximately 6 hours using the included USB cable. The LED
indicator turns solid orange when charging. The LED indicator turns solid
green when the battery is fully charged.
WIRELESS CHARGING
aMAJOR can be charged via the USB-C input or by being placed on a QI®
certified wireless charging pad. When aMAJOR is charging correctly, the LED
indicator will turn solid orange. When the battery is fully charged, the LED
indicator will turn solid green until aMAJOR is removed from the QI® certified
charging pad or the charging cable is unplugged. Charging time on a QI®
certified charging pad is approximately 14 hours.
BATTERY STATUS
When the battery level is below 15%, the LED indicator turns solid red. When the battery level is below 10%, the LED indicator flashes red. aMAJOR will automatically switch off when not in use for 60 minutes.
TRUE WIRELESS STEREO PAIRING
aMAJOR can pair with another aMAJOR and play in True Wireless Stereo (TWS) Turn on both aMAJORs. Simultaneously, press and hold the Bluetooth button on both speakers for 2 seconds to activate TWS pairing mode. The LED indicator on both speakers now flashes purple.
The two aMAJORs will automatically pair, the LED indicator will turn solid white on both speakers and a sound prompt will be heard. Make sure your device is paired to one of your aMAJORs. You are now ready to play in True Wireless Stereo. The two aMAJORs will automatically reconnect in TWS mode when both speakers are turned on, until TWS pairing mode is manually activated again on one of the speakers.
VOICE ASSISTANT FUNCTION ****
You can use your device’s Voice Assistant through the built-in microphone on aMAJOR. Activate your Voice Assistant by pressing and holding the Play button for 2 seconds. The LED indicator will flash white and the built-in microphone will pick up your voice commands. When having two aMAJORs playing in TWS mode, only one aMAJOR can activate the microphone for Voice Assistant. When activating your Voice Assistant, the LED indicator will flash white on the speaker that listens to your commands.
Documents / Resources
|
KREAFUNK AMAJOR Premium Bluetooth
Speaker
[pdf] User Manual
AMAJOR, 2ACVC-AMAJOR, 2ACVCAMAJOR, AMAJOR Premium Bluetooth Speaker, Bluetooth
Speaker
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>