Kicker 46KISLOC2 K-Series Stereo Line-Output Converter w/Remote-Complete Features/Instruction Guide

Kicker 46KISLOC2 K-Series Stereo Line-Output Converter w/Remote

Specifications

• PRODUCT DIMENSIONS : 6 x 5 x 2 inches
• ITEM WEIGHT : 3.04 ounces
• BRAND: KICKER

Introduction

Experience true sonic accuracy at any volume with all the thunderous lows and sparkling highs of your original audio by adding an amplifier to any radio with the KISLOC2 Stereo Line-Our Converter. it is designed without inductors to deliver a completely flat frequency response at all volume levels unlike traditional LOCs. The innovative KISLOC2 automatically converts the speaker signal into both an RCA signal Using nothing more than your factory speaker wires and a powerful 100 milli-amp 12-volt remote wire with the usage of DC offset. It is able to turn on multiple amplifiers. The 12V remote wire delivers plenty of power without searching for a 12V power source.

WHAT’s IN THE BOX

• 46KISLOC2 line output
• owner’s manual

HOW TO SET UP

First splice the wire with the help of a wire splicer. Pull off the wire insulation from both the ends of the wire. Repeat the same procedure for the remote for the line output converter. Twist both the wires together which are to be spliced. Run them on the one side of buck connector and then crimp the top of the cables together so that they have strong connection. Cut the wires that are going to be spliced. After splicing, connect the wires together by twisting them together. Connect the RCA by connecting the blue in positive and red in negative.

Frequentlyh Asked Questions

• Does a line out converter need to be grounded?
  It does not have to be grounded unless the LOC is powered. With this, you only require to tie left and right speakers. There is no need to ground it but if you want you can do this.

• How does a line output converter work?
  LOC transform a speaker-level output into an RCA preamp-level signal. This helps you to connect the radio to the amplifier. It also lets you to connect a new radio to a factory amp of car.

• What is the yellow wire on a line out converter?
  Yellow will receive a 12V constant power. Wire this into the power wire you have boosting your amp and then fuse it individually with a 5 amp fuse.

• How do I tap my rear speakers for my amp?
  A few powered subs have excessive level inputs, so you can simply faucet into the rear speaker wires. If your vehicle has a manufacturing unit sub, use its speaker twine instead. If it doesn’t have excessive degree inputs, you can use a primary line out converter that ties into the speaker wires and turns them into an RCA output.

• How do you wire an amp to a stock head unit?
  The best way to attach it to a manufacturing unit machine is to faucet into the stereo’s speaker outputs for the amp’s enter signal. Then send the amp’s outputs again to the stereo’s harness, and directly to the speakers through the manufacturing unit wiring.

• Can I install a subwoofer with a stock radio?
  Including a subwoofer to a factory stereo is a wonderful approach to enhance your sound while retaining your factory controls. The nifty gadgets can produce bass and sub-bass sounds at low frequencies. Happily, it is pretty easy to wire one into a present automobile stereo gadget.

• Can I hook up a subwoofer to my stock car stereo?
  It’s genuinely possible to install a subwoofer and amplifier in your manufacturing unit device, and also have it sounding properly.

• Does Line Output Converter need power?
  An active Line Out Converter is a greater superior model of the usual passive line out converter. these require 12v power to output a sign. These converters additionally manage up to 400 watts in line with channel meaning OEM Amplified structures and excessive powered systems aren’t an issue.

• What does a high to low converter do?
  The adapter converts excessive-stage signal from the radio’s speaker line and transforms it right into a safer low-stage audio signal. This permits you to feature a 4-channel amplifier for your system for better energy output and higher sound pleasant.

• How much voltage does a remote wire need?
  Whilst within the ON position, there ought to be 12+ volts at the far flung turn on wire. When you have 12+ volts while the ignition is OFF, the remote turn on wire is connected to regular energy.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>