Sabrent DS-2SSD USB 3.0 TO SSD/2.5″ SATA DUAL BAY HARD DRIVE DOCKING STATION User Manual
- June 5, 2024
- Sabrent
Table of Contents
DS-2SSD USB 3.0 TO SSD/2.5″ SATA DUAL BAY HARD DRIVE DOCKING STATION
**User Manual
**
FEATURES
- Read and write two hard drives simultaneously
- Supports Offline Clone: Speed up to 60M/s
- Supports Hot-swap, Plug & Play
- Tool-free installation
- Transfer speeds up to 5Gbps
- Supports 2.5″ SATA I/ II/ Ill HOD and SSD
- LED indicator for power and HOD access
PACKAGE CONTENTS
- 1y Docking Station
- 1y Power Adapter
- 1y USB 3.0 Data Cable
- 1y User Manual
PARTS
- Hard drive slots
- Power LED
- Power Switch
- Copy Button
- USB Cable Interface
- Power Cable Interface
- Lock Switch
USB 3.0 SATA 2.5″ DUAL BAY HARD DRIVE DOCKING STATION
HARD DRIVE DUPLICATION FUNCTION
The Sabrent Standalone Duplicator Dock can be used to duplicate/clone an
existing hard drive without connecting to a computer, or simply as external
storage to transfer data between a hard drive and your computer.
To Use Hard Drive Duplicator Function
- Insert both hard drives in the correct slot Source Disk (HDD1) and Target Disk (HDD2).
- Move the switch (located on the back) to the UNLOCK icon to enable the cloning Function.
Make sure that the USB cable is disconnected from any computer.
- Connect the Power Supply to the wall and switch on the power.
- Press and hold the CLONE for about 5-10 seconds until the 25% LED starts flashing.
- The cloning process will start.
- When the cloning process is complete, LED will stop flashing.
- Move the switch to the LOCK icon when you are done using the Duplicator Function.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>