Sabrent EC-UM3W 2.5″ SSD & SATA HARD DRIVE USB 3.0 ENCLOSURE User Manual
- June 5, 2024
- Sabrent
Table of Contents
Sabrent EC-UM3W 2.5″ SSD & SATA HARD DRIVE USB 3.0 ENCLOSURE
USER’S GUIDE
Congratulations on your purchase of the new Sabrent USB 3.0 Hard Drive Enclosure! The enclosure provides a secure and lightweight method of transporting and transferring large quanttties of data at the fast USB 3.0 speeds, while still being reverse compatible with USB 1.1 & USB 2.0. Your computer will quickly detect and configure the connected Hard Drive (Plug & Play) via the USB connection, with no need to restart the computer. Blazing USB 3.0 speeds of up to 5Gbps allow you to effortlessly run files directly from your hard drive, such as, songs, videos, and databases. The aluminum casing effectively dissipates heat, and its compact sleek design makes for a great travel companion!
| Transfer interface | USB 3.0 (Reverse compatible with USB 1.1 & USB 2.0) |
|---|---|
| Transfer rate | Up to 5Gbps (USB 3.0) |
| Supported HOD | SATA 2.5″ |
| Work temperature | -40-65 C |
| Work humidity | 8%-90% |
| Storage humidity | 5%-95% |
| Operating System | Windows; MAC OS |
SYSTEM REQUIREMENTS
- 2.5″ SATA Hard Drive
- Available USB Port
- Operating Systems: Windows; MAC OS
INSTALLATION GUIDE
- Open the retail package and remove the Hard Drive Enclosure
- Insert the SATA Hard Drive into the case
- Connect the SATA Data and Power connectors to the Hard Drive
- Secure the cover with screws (included)
- Connect the USB 3.0 Cable (included) from the Enclosure to an available USB port on your computer or laptop.
-
At this point the Hard Drive is completely installed. No Software or Drivers are needed to complete the connection. The Hard Drive Enclosure should appear in Device Manager under the “Universal Serial Bus Controllers” as “USB Mass Storage” (There should be
no error icon: ‘?’ or’!’) and the Hard Drive should appear in “MY COMPUTER” as a new Drive Letter. -
If the Hard-Drive is brand new you may need to first format it to make the Drive Letter appear. Right-click on MY COMPUTER, Select MANAGE, Go to DI SK MANAGEMENT, go to the drive information in the Right column and Right-click on the drive to Initialize, Partition, Assign Drive Letter and Format. We recommend the NTFS file system. At this point you should get the Drive letter in MY COMPUTER.
For installation issues, please contact: [email protected]
WEBSITE: www.sabrent.com