Sabrent PB-YS10 10000 mAh Power Bank User Manual
- June 5, 2024
- Sabrent
Table of Contents
10000 mAh POWER BANK
USER MANUAL
QUICK REFERENCE
- USB TYPE-A OUTPUT
- USB TYPE-C INPUT
- MICRO-USB INPUT
- POWER LEVEL INDICATOR
- POWER BUTTON: ON/OFF
- LIGHTNING PORT: INPUT
HOW TO CHECK THE BATTERY’S POWER LEVEL
Push the power button and the LED indicator will light up to let you know the
battery’s power level.
SABRENT PB-YS10 POWER BANK USER MANUAL
HOW TO RECHARGE YOUR SABRENT USB BATTERY
You have several options to recharge your Sabrent battery and you can use
three different INPUT ports to do this: Micro-USB, Type-C, or Lightning.
USE THE LIGHTNING PORT
TO RECHARGE YOUR BATTERY
SABRENT PB-YS10 POWER BANK USER MANUAL
HOW TO RECHARGE YOUR PHONE, TABLET, OR ANY OTHER USB
DEVICE
Use the USB TYPE-A OUTPUT port to recharge your devices. You can safely
recharge any USB device. 
ATTENTION
- In order to extend the lifespan of your battery, please use and recharge it at least once every 3 months.
- Whenever possible, use certified or original cables. In general, if a cable gets too hot to the touch, stop using it immediately and replace it with a thicker cable.
- Avoid dropping it.
- Do not disassemble, do not pierce. Do not spill any liquids on it.
- Do not leave your battery under direct sunlight for extended periods of time. Avoid extreme temperatures (either cold or hot), rain, and humidity.
- Overall, use common sense as you would with any other electronic device.
Please contact our Technical Support Team for additional troubleshooting
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>