HOLLYLAND MARS 400S PRO II HDMI Wireless Video Transmission System User Manual

: June 20, 2024
: HOLLYLAND

Table of Contents

FOREWORD
PACKING LIST
TYPICAL SETUP
PRODUCTINTERFACES
INSTALLATION
OLED DISPLAY
QUICK GUIDE
PRODUCT PARAMETERS
FAE
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HOLLYLAND MARS 400S PRO II HDMI Wireless Video Transmission System

HOLLYLAND MARS 400S PRO II HDMI Wireless Video Transmission
System

FOREWORD

Thank you for purchasing Hollyland MARS 400S PRO II Wireless HD Video Transmission system. Please kindly read this manual carefully before using it. Hope you have a pleasant experience.

KEY FEATURES

450ft Transmission Range between TX and RX(LOS)
300ft Transmission Range between TX and APP(LOS)
Integrated Cold Shoe for Quick Installation
Latency as low as 56ms
SDI Input & HDMI Input at TX
SDI Output & HDMI Output at RX
This device contains 2 modes:
HD Mode (12M)
Focus (56ms)
Supports DC Power Supply, USB Type-C Power Supply and Battery Power Supply
1 Transmitter Supports 2 Receivers(1 Transmitter Supports 1 Receiver and 2 APPs
Monitoring, or 1 Transmitter Supports up to 4 APPs Monitoring Without Receiver)
Supports Smart Channel Selection
Supports APP Firmware Upgrade
Direct Data Stream from RX for Live Streaming

Note: The LOS range of up to 450ft (150m) and transmission latency of 56ms provided above are based on laboratory testing results.

PACKING LIST

1 TX WITH 1 RX PACKING

Transmitter x1
Receiver x1
Antenna X5
DC Adapter x1
User Guide x1

SINGLE RECEIVER PACKING

Receiver x1
Antenna x3
DC Adapter x1
User Guide x1

TYPICAL SETUP

1 TX-1 RX SETUP

Typical Setup

1 TX-2 RX SETUP

Typical Setup

PRODUCTINTERFACES

A TRANSMITTER

Antenna Interface
Fan Air Outlet
SDI Input
OLEO Display Screen
UP
OK
DOWN
Cold Shoe
USB Type-C Interface
Power Switch
HDMI Input
DC Input

B RECEIVER

Antenna Interface
Fan Air Outlet
SDI Output
OLEO Display Screen
UP
OK
DOWN
Cold Shoe
USB Type-C Interface
Power Switch
HDMI Output
DC Input

INSTALLATION

Install the antennas as demonstrated.
Secure the cold shoe with 1/4 screw hole at the bottom of the transmitter and mount it to the camera.
Connect the HDMI input or SDI input of the transmitter with camera’s by HDMI or SDI cable.
Connect to a power supply(compatible with NP-970 battery or the same series of the batteries).
Turn on the devices.

OLED DISPLAY

A TRANSMITTER

Device Number
WIFI Signal Strength
Scene Mode
USB Flash Detection Indicator
Device ID
Channel Display
Video Format
Fan Status
Battery Voltage Display

B RECEIVER

Device Number
WIFI Signal Strength
Scene Mode
USB Flash Detection Indicator
Device ID
Chanel Display
Video Format
Fan Status
Battery Voltage Display

CAUTION

This device supports several power methods, and the device will be charged by the method which has a higher voltage.

The picture on the left shows the symbol of Type-C power supply, the picture on the right shows the symbol of DC power supply.

QUICK GUIDE

ENTER MENU

Long press the “OK” button for 3 seconds to enter the root menu interface. Click “UP” and “DOWN” button to switch menu options, click “OK” to confirm.

CHANNEL CHANGE

Press the button “UP/DOWN” on the transmitter or the receiver to change the current channel. Press “OK” to confirm the channel number, then the channel of the receiver and the transmitter will be synchronously and automatically changed.

PULL STREAM FROM RECEIVER

Quick Guide

Confirm there is video format display on both transmitter and receiver. Use the TypeC to Lan Connector to connect the laptop and RX.
Go to the network settings on the laptop and set it to DHCP mode.
Go to your live stream software, such as VLC Player, OBS Studio, Vmix, etc., and open the network video source via the RTSP URL: rtsp://192.168.218.25:5554.

APP DOWNLOAD AND CONNECTION

“HollyView” APP Download
|
---|---
Connecting Method:
Enter the WiFi connection interface of mobile phone and find out the WiFi named as “HLD + DEVICE ID”, and input the WiFi password to connect (Factory Defult Password is: 12345678). After successful connection, you can have the APP monitoring.

PRODUCT PARAMETERS

| Transmitter| Receiver
---|---|---
Interfaces| HDMI lnput{Type A Female ) SD I Input
2 Antenna Interfaces (RP-SMA Male) DC Input
USB Type-C| HDMI Output(Type A Female)
SDI Output
2 Antenna Interlaces (AP-SMA Male) DC Input USB Type-C
Supply Interfaces| DC Power lnput:6-16V
USB Type -C Power Supply:5V/2A Battery Power Supply:6-16V DC| DC Power lnput:6-16V
USB Type-C Power Supply:5V/2A Battery Power Supply:6-16V DC
Power Consumption| <11W| <7W
Weight| 206g| 206g
Dimension| (L”W”H): 110″7233.Smm (The Battery Plate Exclude)| (L·w·H): 110·12·33_smm (The Battery Plate Exclude)
| HDMI:| HDMI·
| 720p50/59 .94/60| 720p50/60
| 1080 i50/59 .94/60| 1080i50/60
| 1 080p23.98/24/25/29 . 97 /30| 1080p24/25/30
Input/ Output Video Format| 1080p50/59.94/60 SOI: 1080p60/59.94/50(Level A)| 1080p50/60
| 1080p60/59.94/50(Level B)| SDI:
| 1080i60/59.94/50| 1080p60/50(Level A)
| 1080p30/29.97/25/24/23.98| 1080i60/50
| 1080psf24/23.98| 1080p30/25/24
| 1080psf30/29.97/25| 1080psf24
| 720p60/59.94/50| 720p60/50
Frequency| 5GHz| 5GHz
Transmission Power| 21+/-1.SdBm|
Receiver Sensitive| | -BOdBm
Transmission Latency| HD Mode : 66ms Focus: 56ms| HD Mode: 66ms Focus: 56ms
Bandwidth| 20MHz| 20MHz

Note: The operating frequency and TX power vary by country and region. In some countries and regions, the 5.1 GHz, 5.2GHz, and 5.8GHz frequency bands are prohibited, or the 5.1GHz and 5.2GHz frequency bands are only allowed for indoor use. Please refer to local laws and regulations for more information.