Laserliner 082.270A VideoInspector 3D Inspection Camera Instructions

Laserliner 082.270A VideoInspector 3D Inspection Camera

Completely read through the operating instructions, the „Warranty and Additional Information“ booklet as well as the latest information under the internet link at the end of these instructions. Follow the instructions they contain. This document must be kept in a safe place and passed on together with the device.

Function / Application
This inspection camera features a micro-camera that sends colour video images to the LCD so that areas which are difficult to access (cavities, shafts, masonry or inside cars, for example) can be checked.

General safety instructions

• The device must only be used in accordance with its intended purpose and within the scope of the specifications.
• The measuring tools and accessories are not toys. Keep out of reach of children.
• The structure of the device must not be modified in any way.
• Do not expose the device to mechanical stress, extreme temperatures, moisture or significant vibration.
• The device must no longer be used if one or more of its functions fail or the battery charge is weak.
• Use the power supply/charger unit only in closed rooms; do not expose to moisture or rain otherwise risk of electric shock.
• Charge the device‘s battery completely prior to use.
• Use only genuine accessories. Use of inappropriate accessories will invalidate the warranty.
• Charging is completed when the LED indicator lights green.
• A red battery symbol with an exclamation mark is shown on the display when the battery charge is low.
• The battery can also be charged while using the device.
• Disconnect the power pack from the mains when the device is not in use.
• The LCD unit must not be immersed in water. The base unit must not come in contact with liquids.
• The camera head is not acid-resistant or fireproof.
• Make sure that the VideoInspector 3D does not come into contact with chemicals, power sources, moving or hot objects. This can damage the device and put its user at risk of serious injury.
• The measuring head can become very hot during operation and may damage sensitive materials.
• The VideoInspector 3D must not be used for medical examinations / examining people.
• To maintain the IP 55 protection class of the basic unit , the caps on the connections must be firmly locked in.
• Please ensure compliance with the safety regulations set out by local and national authorities with regard to the correct and proper use of the device.
• The unit is not suitable for taking measurements close to dangerous voltages. Therefore always make sure that conductive parts are at zero potential when carrying out measurements in the vicinity of electrical systems. Safe isolation from the power supply and precautions to prevent systems being switched on again must be ensured by implementing suitable measures.

Safety instructions
Using artificial, optical emission (OStrV)

LED outlet

• The device works with LEDs of risk group RG 0 (exempt, no risk) in accordance with the latest versions of applicable standards relating to photobiological safety (EN 62471:2008-09ff / IEC/TR 62471:2006-07ff).

• When used for the intended purpose and under reasonably foreseeable conditions, the accessible radiation of the LEDs is safe for the human eye and skin.

• Safety instructions
  Dealing with electromagnetic radiation

• The measuring device complies with electromagnetic compatibility regulations and limit values in accordance with EMC-Directive 2014/30/EU.
  Safety instructions

• Dealing with electromagnetic interference

• The measuring device complies with the provisions and limit values for safety and electromagnetic compatibility in accordance with Directive 2014/35/EU (low voltage/LVD) and the Directive 2014/30/EU (electromagnetic compatibility/EMC).

• Local operating restrictions – for example, in hospitals, aircraft, petrol stations or in the vicinity of people with pacemakers – may apply. Electronic devices can potentially cause hazards or interference or be subject to hazards or interference.

PRODUCT DESCRIPTION

1. Operation indicator

2. LCD

3. Hotkeys

4. Joystick to turn the camera head

5. HDMI interface

6. Micro USB interface / Charging socket

7. Micro SD card slot

8. Connection for flex cable

9. Trigger

10. Battery compartment Camera head

11. LED

12. Lens

13. Magnetic

14. holder

    • ON/OFF / Still image

    • Rotation 180° / Menu control

    • Media gallery Image/video

    • Cancel

    • Settings mode / Confirm /
      Select recordings / Delete recording

    • Image / video selection

    • Menu control

    • LED lighting
      NOTE: The VideoInspector 3D delivers sharp images in a range between 2.5 and 10 cm from the camera head. Objects outside this range may appear blurred.

CAMERA INSTRUCTIONS

• a Image recording
• b Menu closed
• c Save
• d LED lighting
• e SD card active
• f Insert SD card
• g Battery status
• h Zoom
• i Current date
• j Current time
• k Video recording
• l Recording
• m Recording date
• n Recording time
• o Zoom +
• p Zoom –
• q Navigate zoomed image
• r Navigate zoomed image
• s Navigate zoomed image
• t Navigate zoomed image
• u Back to media gallery
• v Played time
• w Recording time
• x Remaining time
• A Zoom
• B Date and time stamp
• C Image format
• D Image rotation
• E Set date/time
• F Select language
• G Format data medium
• H Factory setting
• I Firmware version

SETTING FUNCTIONS

1. ON / OFF

2. Inserting micro-SD card
   To insert a micro-SD card, first open the rubber cover and then insert the memory card as illustrated. You cannot record anything without a storage medium.

3. Settings mode To return to recording mode, press the ESC button (several times).

   • a. Zoom
   • b. Date and time stamp
   • c. Image format 
   • d. Image rotation
   • e. Set date / time 
   • f. Select language (ZH-CN, ZH-TW, EN, JA, KO, FR, DE, PT, ES, RU, IT, NL)
   • g. Format data medium 
   • h. Factory setting
   • i. Firmware version / System update 

4. Record mode  Still images / Video recordings
   Guide the camera head on the flexible tubing to the required position and adjust it with the joystick (4). If lighting conditions are poor, switch on the LED lighting. Zoom in on distant or small objects. The manual image rotation function allows the image to be rotated by 90° steps on the display. Briefly press the trigger (9) to take a still image or make a video recording and save it to the SD card.
   Press the button again to stop the video recording.

   • a. Image / video recording selection  
   • b. Camera head adjustment
   • c. LED lighting
   • 1x OFF
   • 2x LED Level 1
   • 3x LED Level 2
   • 4x LED Level 3
   • 5x LED Level 4
   • 6x LED Level 5
   • 7x LED Level 6
   • 8x LED Level 7
   • d. Zoom (see section 3 a.)
   • e. Image rotation 
   • 1x = Rotation 90°
   • 2x = Rotation 90°
   • 3x = Rotation 90°
   • 4x = Original image
   • f. Image/video recording Briefly press the trigger (9) to take a still image or make a video recording and save it to the SD card. Press the button again to stop the video recording. 

5. Playback mode
   Playback of still images/video recordings
   Press the „c“ button to call up the media gallery. Press the „c“ button again to exit playback mode.

   • a. Playing back and deleting image / video recordings

   • b. Delete recording
     To delete image or video recording, select the image in the media gallery, see section 5 a.
     Deleting cannot be undone.

   • All files and folders can be deleted by reformatting the data medium. Refer to „3 g. Format Data Medium“.

USB data transfer
Data saved on the SD card can be transferred to a PC either with the supplied card reader or via the micro USB interface.

Camera head / Focus
The VideoInspector 3D delivers sharp images in a range between 2.5 and 10 cm from the camera head. 

Changing the battery

Remove magnetic holder, open battery compartment and insert battery as indicated by the installation= symbols. Ensure correct polarity.

Connect power supply/battery charger
To charge the device, plug the supplied power supply/charger unit into the micro USB interface/charging socket „6“ and connect it to a corresponding power source.

Camera unit replacement
The camera unit is easy to remove and replace. Simply undo the screw and pull out the camera unit by the joystick.

Danger – pow e rful magnetic fields
Powerful magnetic fields can adversely affect persons with active medical implants (e.g. pacemaker) as well as electromechanical devices (e.g. magnetic cards, mechanical clocks, precision mechanics, hard disks).
With regard to the effect of powerful magnetic fields on persons, the applicable national stipulations and regulations must comply with such as BGV B11 §14 „electromagnetic fields“ (occupational health and safety – electromagnetic fields) in the Federal Republic of Germany. To avoid interference/disruption, always keep the implant or device a safe distance of at least 30 cm away from the magnet.

Information on maintenance and care

Clean all components with a damp cloth and do not use cleaning agents, scouring agents and solvents.
Remove the battery(ies) before storing for longer periods. Store the device in a clean and dry place.

2000 mAh
Charging time| approx. 4 h
Operating time| approx. 3.5 h
Operating conditions| -10°C … 50°C, max. humidity 20 … 85% rH, no condensation, max. working altitude 4000 m above sea level
Storage conditions| -20°C … 60°C, max. humidity 80% rH
Dimensions (W x H x D)| 115 x 190 x 115 mm (not including flexible tubing and holder)
Weight| 485 g (incl. battery pack and flexible tubing / without holder)

EU directives and disposal

This device complies with all necessary standards for the free movement of goods within the EU.
This product is an electric device and must be collected separately for disposal according to the European Directive on waste electrical and electronic equipment.
Further safety and supplementary notices at: http://laserliner.com/info?an=AIH

SERVICE
Umarex GmbH & Co. KG
– Laserliner –
Möhnestraße 149, 59755 Arnsberg, Germany Tel.: +49 2932 638-300, Fax: +49 2932 638-333 info@laserliner.com

References

• Info - Laserliner
• Home

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>