Logitech G933 Gaming Headset User Manual

Logitech G933 Gaming Headset User Manual

What’s in the box

1. G933 Artemis Spectrum Snow Gaming Headset
2. Custom tags (L/R)
3. PC cable (USB to Micro-USB, 3m)
4. 3.5mm cable (1.5m)
5. 3.5mm to 2.5mm adapter
6. RCA to 3.5mm cable (1m)
7. Documentat

Features

1. Adjustable padded sports mesh headband
2. Removable backlit custom tags
3. Boom mic mute indicator LED
4. Retractable boom microphone Automatically mutes in “up” position
5. Lighting zones (G logo + light strip)
6. Washable soft sports mesh earpads
7. Wireless On/Off switch
8. Pro-G™ Audio Drivers
9. Programmable buttons (G1/G2/G3)
10. Battery housed in earcup
11. Microphone Mute
12. Volume Wheel
13. 3.5mm (mobile) connection
14. USB charging connection
15. USB Wireless Mix Adapter housed in earcup
    • 3.5mm jack (stereo input only)

Headset button layout

1. Wireless On/Off switch

2. G3 (programmable):
   Default equalizer (EQ) cycle

   • Will cycle through EQ settings in Logitech Gaming software, including: Flat, MOBA, FPS presets, or custom EQ

3. G2 (programmable): Default surround sound on/off

4. G1 (programmable): Lighting cycle

   • Will cycle through lighting settings in Logitech Gaming Software, including: breathing, solid cyan, custom, and off

5. Microphone mute

6. Volume wheel

G1, G2, and G3 are programmable using the Logitech Gaming Software (in PC mode only):
www.logitech.com/support/g933-snow
Note: Buttons and volume wheel only operate in Wireless On mode. Some buttons and features may require PC connection and Logitech Gaming Software.

Inline 3.5mm audio controls

1. Mic select switch (headset boom/inline, mobile mode only)
   • Headset boom unavailable for mobile device while in Wireless Off mode
2. Inline volume wheel
3. Mobile device play/pause/answer call
4. Inline microphone
5. Mobile mic mute switch

Note:

The inline 3.5mm audio control is fully compatible with Apple devices but may have partial or no functions with old Android devices. Please insert the 3.5mm plug nearest the inline volume wheel into headset, and the far end into the audio output device (i.e. PC, controller, mobile, etc.).

Battery management

G933 Artemis Spectrum Snow wireless headset is powered via a battery housed in the right earcup. When you are not using your G933 Artemis Spectrum Snow wireless headset, plug it in via the USB port on the bottom of the unit to charge. When fully depleted, the battery takes approximately 3.5 hours to reach full charge on standard USB output. For the optimal experience, plug in your unit and allow it to charge fully before first use.

Logitech Gaming Software

The headset home screen in Logitech Gaming Software has a battery charge level indicator:

When using battery, this will indicate charge level
This indicates the unit is charging

Critical Battery Warning

G933 Artemis Spectrum Snow gaming headset will play a tone at low charge. The headset’s lighting will also dim when at low charge. At critical charge level, the unit will play a tone and lighting will turn off. Use USB charging cable to plug in headset immediately if you hear these tones to ensure uninterrupted listening or gaming.

Idle sleep mode
G933 Artemis Spectrum Snow will go into sleep mode to conserve battery power when it has not received an audio signal in 5 minutes. In idle sleep mode, the unit’s lighting will turn off, and it will disconnect from the USB wireless mix adapter. To wake up your headset from sleep mode, press any button on the unit. Your unit will continue to use battery power at a reduced rate while in idle sleep mode. If you plan to leave your headset idle for an extended period of time, turn off your headset and plug it in via USB to charge.

On/Off tones and lights
When your headset is turned on, it will play a tone to indicate that your headset has turned on. The lights will perform a power on light cycle sequence, then switch to the currently selected lighting. When the unit is turned off, lights will switch to blue and fade out while it powers down.

Wireless On/Off

G933 has two operation modes, Wireless On, and Wireless Off.

Wireless On

In Wireless On mode, most headset features are available,1 including custom sound profiles, RGB lighting, wireless, and audio mixing. When battery charge is low, lighting will dim and low battery notification tone will play. When battery charge level is critical, lighting will turn off. Boom mic is available for devices connected through the on-headset 3.5mm audio port in this mode. Select between boom mic and inline mic using switch on included mobile cable.

Wireless range2
Indoor: 15 meters

Battery life3
No lighting: 12 hours
Default lighting: 8 hours

1. Some features may require Logitech Gaming Software.
2. Range may vary with environmental conditions.
3. Rechargeable batteries have a limited number of charge cycles. Battery life measured at 50% volume.

Wireless Off (passive mode)

In Wireless Off (passive mode),
your headset will operate in passive unpowered mode. Your headset will play audio from any device connected through the 3.5mm input on the headset. Features that require power, including 7.1 surround sound, custom sound profiles, on-headset buttons, volume wheel operation, and button/lighting customization functions are not available in this mode. Boom mic is not available for devices connected through the on-headset 3.5mm audio port in this mode. Select inline mic using switch on included mobile cable. This mode can be used to preserve battery life.

Setup for PC (PC mode)

1. Download and install Logitech Gaming Software:
   www.logitech.com/support/g933-snow

2. Set switch to Wireless On postition.

3. Connect USB Wireless Mix Adapter to PC. Headset will automatically connect.

Mixing audio sources

While connected via USB Wireless
Mix Adapter, the G933 can also use the 3.5mm cable to connect to another audio source (ex. smartphone). Both audio sources can be played simultaneously. Inline controls and inline microphone can be used to answer calls, adjust volume, etc independently for the mobile device.

Setup for PC (3.5mm connection)
The G933 can also connect to audio devices solely via 3.5mm cable.

1. 1. Set switch to Wireless Off mode for passive audio mode, or set to Wireless On mode for active audio mode with additional features (see “Wireless On/Off” section).

2. Connect to PC using the 3.5mm cable 3.5mm inline controls can be used to adjust audio.
   Mic select

   • Select “microphone” position for inline microphone
   • Select “headset” position to use headset boom microphone

Some features, including 7.1 surround sound, on-headset buttons, volume wheel operation, and customization of lighting and button functions are not available without USB connection. Boom mic is not available for 3.5mm device while in Wireless Off mode. Some PCs may require a 3.5mm 4-pole to mic/stereo splitter adapter (not included) to use microphone features in this mode.

Setup for mobile

1. Set switch to Wireless Off mode for passive audio mode, or set to Wireless On mode for active audio mode with additional features (see “Wireless On/Off” section).

2. Connect the headset to the mobile device via the 3.5mm cable.

3. 3.5mm inline controls can be used to adjust audio.
   Mic select

   • Select “microphone” position for inline microphone
   • Select “headset” position to use headset boom microphone

Boom microphone is only available in Wireless On mode. Inline mic is available in both modes.

Setup for console: Xbox One™ or PS4™

1. Set switch to Wireless Off mode for passive audio mode, or set to Wireless On mode for active audio mode with additional features (see “Wireless On/Off” section).
2. Connect the headset to the console controller using the 3.5mm cable.
   • Xbox One may require Xbox One headset adapter (sold separately).

PlayStation setup (settings)

1. Connect headset
2. Open Settings
3. Select “Sound and Screen”
4. Select “Audio Output Settings”
5. Set “Output to Headphones” to “All Audio”

Headset will not operate via USB Wireless Mix Adapter on Xbox One. Boom microphone is only available in Wireless On mode. Inline mic is available in both modes.

Alternate setup for Sony PlayStation® 4

Wireless operation

1. Set switch to Wireless On postition.
2. Connect the headset to the console using the USB Wireless Mix Adapter. Note: Some buttons and functions may not operate when connected to the PlayStation 4. Programming of lighting and buttons is not possible on the PlayStation. 7.1 surround sound is not available while connected to PlayStation.

PlayStation setup (settings)

1. Plug in headset via USB or 3.5mm cables
2. Open Settings
3. Select “Sound and Screen”
4. Select “Audio Output Settings”
5. Set “Output to Headphones” to “All Audio

Headset will not operate via USB Wireless Mix Adapter on Xbox One. Boom microphone is only available in Wireless On mode. Inline mic is available in both modes.

Setup for Xbox 360

Chat audio

1. Plug 2.5mm to 3.5mm adapter into controller
2. Attach 3.5mm cable to adapter and headset

Console audio

1. Plug USB Wireless Mix Adapter to powered USB port
2. Connect USB Wireless Mix Adapter to console using RCA to 3.5mm adapter cable

Setup for PlayStation® 3

Chat audio

1. Plug USB Wireless Mix Adapter into USB port on console

Console audio

1. Plug USB Wireless Mix Adapter 1. Plug USB Wireless Mix Adapter to powered USB port
2. Connect USB Wireless Mix Adapter to console using RCA to 3.5mm adapter cable

Wireless Home Theater

G933 can be used to connect to home theater systems wirelessly:

1. Set headset to Wireless On mode
2. Plug USB Wireless Mix Adapter into any USB power source (i.e. USB wall adapter, powered USB port on TV, or console port).
3. Plug RCA to 3.5mm cable into RCA Output on Home Theater and 3.5mm input on USB Wireless Mix Adapter.
4. Audio will transmit via USB Wireless Mix Adapter to headset.

Three source audio mixing

The device will mix audio from all connected sources. Up to three devices can be connected.

Available inputs:

• USB
• 3.5mm (on headset, stereo + mic)
• 3.5mm (on mix adapter, stereo only)

1. Answer calls while playing games
2. Watch TV and answer calls while playing games

RGB lighting zone customization

• Zone 1: G logo
• Zone 2: Lighting strip

Each lighting zone can be programmed with the Logitech Gaming Software (PC mode only). www.logitech.com/support/g933-snow

Tag customization

The left and right custom tags can be removed and replaced with custom tags.

Logitech Gaming Software

G-key buttons, lighting, equalizer, and surround sound profile programming is possible through the Logitech Gaming Software.

1. G-keys
2. Lighting
3. Equalizer
4. Surround

Color/Equalizer cycling

G1 and G3 buttons are pre-programmed by default to cycle through lighting and equalizer profiles. When the headset is connected to a system with Logitech Gaming Software running, it will cycle through all equalizer or lighting options programmed into Logitech Gaming Software. When the headset is not connected to a system with Logitech Gaming Software running, it will cycle through the custom lighting or equalizer profiles stored in the headset’s onboard memory. These profiles can be programmed via Logitech Gaming Software

Pairing instructions

If your device becomes unpaired or you receive a replacement USB Wireless Mix Adapter, follow these instructions to pair your device with the USB Wireless Mix Adapter:

1. Plug in USB Wireless Mix Adapter
2. Insert pin into reset port on adapter to initiate pairing mode
3. Light on adapter will blink
4. Turn on headset
5. Hold “Microphone mute” button for 15 seconds to initiate pairing mode
6. G logo will blink green to indicate pairing mode
7. Logo will turn to solid color and then return to currently selected lighting when paired

Earpad cleaning

1. Removal
2. Washing
   • Once removed, the earpads can be hand washed in warm water.
   • Press with soft towel to dry, do not wring.
   • Allow to air dry before reattaching.
3. Replacement

Inhalt

1. G933 Artemis Spectrum Snow Gaming Headset
2. Individuelle Tags (L/R)
3. Kabel mit 3,5-mm-Anschlüssen (1,5 m)
4. Adapter 3,5 auf 2,5 mm
5. Cinch-auf-3,5-mm-Kabel (1 m)
6. Bedienungsanleitung

gaming.logitech.com

www.logitech.com/support/g933-snow

© 2016 Logitech. Logitech, Logi and other Logitech marks are owned by Logitech and may be registered. “PlayStation,” “PlayStation 4,” and “PS4” are registered trademarks of Sony Computer Entertainment Inc. Xbox One is either registered trademark or trademark of the Microsoft group of companies. All other trademarks are the property of their respective owners. 621-000002.002

Logitech G933 Gaming Headset User Manual

Download PDF:Logitech G933 Gaming Headset User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>