LOSI LOS334024 No Prep Drag Car Carbon Fiber Shock Tower Extension Instruction Manual
- June 12, 2024
- Losi
Table of Contents
LOSI LOS334024 No Prep Drag Car Carbon Fiber Shock Tower Extension
Product Information
The Carbon Fiber Shock Tower Extension is a component designed to enhance the performance and durability of your vehicle’s suspension system. It is made from high-quality carbon fiber, known for its lightweight yet strong characteristics. The package includes the following components:
- M3 x4 Screws
- M3x20mm x2 Screws
- M3x25mm x2 Screws
- Carbon Shock Extension x1
Product Usage Instructions
- Ensure that your vehicle is turned off and on a stable surface.
- Locate the shock tower on your vehicle’s suspension system.
- Remove the existing screws holding the shock tower in place, if applicable.
- Position the Carbon Fiber Shock Tower Extension onto the shock tower, aligning the holes.
- Insert the M3 screws provided in the package through the holes on the extension and into the shock tower.
- Tighten the screws using an appropriate screwdriver or tool until secure.
- Repeat steps 4-6 for any additional holes on the shock tower.
- Inspect the installed extension to ensure proper alignment and secure attachment.
- If necessary, adjust the extension or re-tighten the screws for optimal fitment.
- Once satisfied with the installation, test the suspension system to ensure proper functionality.
Please refer to your vehicle’s specific user manual for any additional instructions or precautions related to installing aftermarket components.
Tools
Installation
©2022 Horizon Hobby, LLC. Losi and TLR are registered trademarks of Horizon Hobby, LLC. All other trademarks, service marks and logos are property of their respective owners.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>