vivint VS-SCRN00-000 Pro Display User Guide
- June 5, 2024
- vivint
Table of Contents
vivint VS-SCRN00-000 Pro Display
PRINT INSTRUCTIONs: I!! DRAFT!!!
REFERENCE SHEET FOR VS-SCRNO0-000 P/N 77-600053-001 REV 1.0|
INK: BLACK | MATERIAL: 20 LB MEAD BOND | Size: 8.50″ X 11.00″ SCALE 1:1|
FOLDS: B1-FOLD VERTICAL, BI-FOLD HORIZONTAL (TO FIT IN BOx)
Quick Reference (Overview, Specs, Installation, Regulatory)
The Vivint Pro Display is a touchscreen device that provides access and control of a Vivint Smart Home system wherever it’s convenient in the home. The display communicates with the Vivint Smart Hub, enhancing usability by allowing the user to perform security and automation functions by navigating and interacting with onscreen menus and options. With a streamlined design, the display can be installed on a wall, or on a desk or tabletop in any room for extended system control.
The display’s touchscreen interface allows control of all system functions, including arming and disarming security, viewing and clearing alerts, and configuring and controlling peripheral devices such as sensors, locks, and cameras. Additionally, the display shows time & weather, and the real-time status of the network, power, sound, and system security. Speaker and microphones provide two-way talk with Vivint Monitoring, as well as audible doorbell rings, system count down, sensor status sounds, and alarm siren (piezo) functionality. The downcast LED light indicates the status of the security system. Emergency faaturas ara also available through that Enmaraencuican an the touchscreen status bar.
This document includes a product description, illustrations, basic operation/functionality, installation instructions; as well as technical specifications, standards listings, and regulatory compliance references.
Operation Overview/ User Functionality
The Display Pro works with the Smart Hub. Once the display is installed, paired to the hub, and connected to the network, the user can access system features via its touchscreen interface. The hub monitors and manages all aspects of your integrated smart home system, including security sensors (door/window, motion, etc.), detectors (smoke, CO, etc.), and automation devices (cameras, door locks, etc.). The display provides critical status information, alerts, and activity history; and lets you access video, audio, and emergency features, arm & disarm security, configure and control peripheral devices, and customize the display appearance and behavior.
MAIN FEATURE WHAT YOU CAN DO WITH THE DISPLAY
- Arm and disarm the security system (Stay & Away Modes)
- Check system status, and view activity history
- Activate alarms with the Panic, Emergency, and Fire buttons
- Talk with Vivint Monitoring Station using two-way talk
- Acknowledge and clear alert notifications
- Add, configure, and control smart home devices and users
- Configure unique display and sound settings.
Technical/ Hardware Specifications
Standards Certifications and Listings
For complete regulatory compliance information, go to: vivint.com/fc.
Installation Instructions Outline
This outline provides a high-level summary of the installation of a Pro
Display touchscreen device. The display can be installed on a wall or on a
flat surface like a desk or tabletop.
For best results, the display should be as near to the control hub as possible
for a strong reliable Wi-Fi connection.
TO mount the display on a desk/table top, follow these steps:
NOTE: YOu must have the desktop mount back plate with its built-in power
supply.
- Determine where to install the display. (NOTE: Install near an unswitched wall outlet.)
- Remove the tape covering the backup battery wire, and insert the battery connector.
- Place the display on the desktop mount back plate. First, noting the location of the clasps, push the display unit flush onto the back plate, then slide the display down so that the clasps hold it securely in place. The power connectors will make contact.
- Power on the display (for initial setup) by plugging the power supply into the outlet. You can now pair the display to the hub and add it to the network. See the procedure below.
To mount the display on the wall, follow these steps:
- Determine where to install the display. (NOTE: Install near an unswitched wall outlet.)
- Use the wall mount back plate to mark the screw holes and wiring access hole, and drill the wiring hole. Be careful to not drill through pipes or electrical; and be mindful of distance and obstructions to the hub to ensure a strong Wi-Fi signal.
- Route the power supply cable from the outlet to the mounting location, and push the wires into the terminal plug on the back plate. You do not need to observe polarity.
- Attach the back plate to the wall with the provided screws (use anchors if necessary).
- Remove the tape covering the backup battery wire, and insert the battery connector.
- Power on the display (for initial setup) by plugging the power supply into the outlet. You can now pair the display to the hub and add it to the network. See the procedure below.
- Place the display on the back plate. First, noting the clasps, push the display unit flush on to the back plate, then slide the display down so that the clasps hold it securely in place.
Pairing the Pro Display to the Smart Hub (Adding it to the Network/
System)
Before the display can work with the hub as an interface for the system, you
must first pair it as a wireless device to the hub and connect to the local
network. Follow these steps:
- Power on the display while it’s near the hub. After initial setup you can move the display, if necessary, to the desired location.
- At the Setup screen, press the button icon, and then press and hold the 0 (zero) button on the hub keypad. The hub LED light bar will flash white indicating AP mode.
- At the Hub Found screen, press the button icon. Enter the provided PIN at the keypad to connect to the hub, and then select the home/local Wi-Fi network and enter the correct password. The display and hub will communicate network credentials, disconnect from each other, and then both connect to the local network as paired devices.
- Once the connection is complete, the display is configured and boots up to the Home screen with full functionality. NOTE: This may take a few minutes.
- Once the bootup process is complete, the shows the Home screen providing system status, monitoring, and interaction with the same device functionality as the hub.
Wireless Product Notice
-
Wireless communications hardware provides reliable communication; however, there are some limitations which must be observed.
The transmitters are required to comply with all applicable wireless rules and regulations. As such, they have limited transmitter power and limited range. -
Wireless signals may be blocked by radio signals that occur on or near the wireless operating frequencies.
Desktop Mount/Stand Back Plate (side & inside view)
Wall Mount Back Plate (inside view)
FCC and ISED Canada Regulatory Compliance Declarations
CAUTION Unauthorized changes or modifications could void the user’s
authority to operate the equipment.
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of FCC Rules and Industry Canada license-
exempt RSS standard(s). Operation is subject to two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation of the device.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/television technician for help.
This device meets all the other requirements specified in Part 15E, Section
15.407 of the FCC Rules:
(0 the device for operation in the band 5150-5250 MHz is only for indoor use.
References
- Vivint's Policies | Updated Terms And Conditions
- Vivint® Smart Home Security & Alarm Systems | 855.832.1550
- Vivint® Smart Home Security & Alarm Systems | 855.832.1550
- Vivint's Policies | Updated Terms And Conditions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>