Shenzhen Yuyuanxin Electronic Technology TP4-022 Wireless Keyboard User Manual

Electronic Technology TP4-022 Wireless Keyboard
User Manual

Model: TP4-022 ZL201530514134
Patented Product(s). counterfeiting not allowed

Product picture:

Product Introduction:

1. Designed for the P4 controller, It is compatible with the P4 controller perfectly, and it can input letters and symbols easily and conveniently.
2. The wireless keyboard can be used to input letters and symbols to have a better experience of chatting, voice function, surfing, searching for games, playing games, and so on. This product is compatible with any version of the P4 controller and is easy to install and take out from the P4 controller.
3. While charging for the wireless keyboard, the P4 controller can be charged too.

Guideline:

Guideline:

1.  Firstly, connect the P4 console with power and LCD. Then turn k on and its power light will be on.
2. Adjust the switch of the keyboard to “OW to turn on the wireless keyboard, the blue LED will twinkle once.
3. Please insert the 2.4G receiver into the P4 console USB port, and press the pairing key within 15 seconds. At this time the pairing blue LED will flash and match automatically, after connecting the keyboard with the P4 controller, (Note: Make sure the pairing distance is within 0.5m; if failed pairing, please reset the above steps.)
4. The blue LED will be off, while pairing successfully,
5. The wireless keyboard can be used directly next time when turning it on and does not need to reconnect again, once the wireless keyboard is connected to the 2.4 G receiver.
6. The P4 controller’s sound can be played by the wireless keyboard’s loudspeaker when you connect the keyboard to P4 original controller with the 3.5 audio jack and put the power key at the station of Speake.
7. The 3.5 audio jack of the keyboard can be used with the original headset with the same effect as the original controller.
8. The wireless keyboard will enter into sleeping mode automatically when it is disconnected, it can be reconnected again by pressing any key, please restart the keyboard and reconnect them again if the automatic connection fails.
9. Press the “shift” key and the needed symbol key at the same time, you can input the relevant symbols.
10. Lock in the capital input if p you press the “Caps Lock key once, and go back to lowercase input when pressing it again.
11. The built-in lithium battery is in lower power if the blue LED keeps flashing slowly. The red LED will light red while charging, and light off while fully charged. 12. Please turn off the product if you do not use it to save power.
12. Please charge this product at least every two months, if you do not use the product for a long time to prolong the battery’s life.

Functional Buttons:

1. Controller audio connector
2, pannier charging port
3.2.4Greceiver Storage
4. loudspeaker
5. 3in1gear voice-on-off
6. Match code key
7. 3.5aucho annul port| 8. MICRO USB charging port
9. Red/Blue indicator
10. Capslock
11. Shift key
12. Delete key
13. Space key
14. alphabetic characters key
15. Enter key
---|---

Specification:

1. Applicable scope:P-0 contioler
2. Wireless placed: 2AG
3. Wireless Distance: 8-10m  Yetriri-g current 0.8nAterhen a key was messed)
4. Warking current 8uAtar the gear of Oktbut do not press the keys)
5. Product Size: 140170’48mm
6. Material: ABS

Precautions

In order to help users operate this product properly and make sure the product Is In good ccodltbn. please read and follow the following notes:

• Do not seriously bump the product.
• Keep the product away from benzene. thinner and other chemicals.
• Keep away from the strong magnetic field, electric
• Please keep away from the direct ray cc heating apparatus.
• Do not dismantle. repair or remold it by yourself.
• Discarded package. battery. disused electronic products shall be dressed properly.

FCC STATEMENT:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>