vivint ASY-600146-001 Smart Home Lighting Instruction Manual

vivint ASY-600146-001 Smart Home Lighting

Product Information: Vivint Smart Lighting

The Vivint Smart Lighting switch plates are designed to replace both toggle and rocker style switches. They are compatible with single (1) gang, double (2) gang, and triple (3) gang light switches. The switch plates offer remote control ability to turn the lights on and off, and dim the lights from 0% to 100%. The LED light on the switch plate indicates status and is used for visual feedback during the pairing process. The product includes a bridge, mounting bracket, and plate for installation.

Specifications

• Switch plate styles: toggle and rocker
• Compatibility: 1-gang, 2-gang, and 3-gang light switches
• Remote control ability: on/off and dimming from 0% to 100%
• LED indicator light for visual feedback
• Bridge for network/system connection
• Mounting bracket and plate for installation

Regulatory Compliance

The Vivint Smart Lighting switch plates meet the following regulatory requirements:

• FCC Part 15B
• FCC Part 15C
• FCC Part 15E

Product Usage Instructions

Installation

1. Connect and pair the bridge to the network/system.
2. Select or create a group to which you can add smart light bulbs.
3. Install the smart switch to control the group of lights.

To install the smart switch:

1. Remove the cover from the light switch you want to replace, and save the 2 cover plate screws.
2. Secure the corresponding mounting bracket (toggle or rocker; 1, 2, or 3 gang) to the light switch using the 2 screws.
3. Attach the switch plate to the mounting bracket.

Pairing

To pair the smart switch and light bulbs:

1. Select the group to which you want to add the light bulbs, or create a new custom group.
2. Replace the existing bulbs with supported smart bulbs and power them on.
3. Scan for the bulbs or enter their serial number manually.
4. Add the bulbs to the group and select “Save and Continue.”
5. Select the “Add New Vivint Switch” button to configure the smart switch to control that group.

Vivint Smart Lighting is a smart home indoor lighting solution that is comprised of three components — switch plates, bridges, and light bulbs. Smart Lighting can be installed as a standalone solution, or integrated with an existing Vivint Smart Home system in order to provide remote lighting control via the panel/hub or the mobile app. Either professionally installed or DIY installed by the homeowner, you simply connect the bridge device to the local network router, configure groups of lights and install the smart light bulbs, and replace existing light switches with the corresponding smart switch plate. The Vivint Smart Lighting switch plates can replace both toggle and rocker style switches; and are compatible with single (1) gang, double (2) gang, and triple (3) gang light switches. See the illustrations below. Setup follows the same general procedure for all switch types; however, please note that this document uses the single-gang toggle switch plate when describing switch- specific tasks in the installation instructions. Key features include: remote control ability to turn the lights on and off, and dim the lights from 0% to 100%. Lights can be configured individually or in groups. The LED light on switch plate indicates status, and is used for visual feedback during the pairing process. This document includes a product description, illustrations, installation instructions, basic operation / user functionality; as well as technical specifications, standards listings, and regulatory compliance references.

Smart Switch Plates for Both Toggle and Rocker Style Switches (1, 2, 3 Gang) —
Vivint Smart Lighting offers switch plates for both toggle and rocker switch styles, as well as compatibility for 1, 2, and 3 gangs. The switches plates (covers) are the same for both toggle and rocker switches. The three gang sizes are shown below, as well as a side and bottom view of the single switch.

Installation Instructions

Installing and setting up the Vivint Smart Lighting solution is a multi-step procedure but it is straightforward and can be quickly learned. Setup is comprised of the main tasks shown below. The Smart Home Pro or homeowner should carefully read all of these steps in order to ensure a successful installation and optimal performance. Please note that the switch-specific steps below describe an installation using the single-gang toggle switch. For additional information, refer to the Field Service Smart Home Pros website.

MAIN SETUP TASKS OUTLINE

1.  Bridge — Connect and pair the bridge to the network/system
2.  Group — Select or create a “group” to which you can add smart light bulbs
3. Switch — Install the smart switch to control the group of lights

Task 1: To connect and pair the bridge to the network/system:

1.  At the panel, go to Smart Home Devices > Zigbee Devices > Zigbee Bridge.
2. Connect the bridge to the local network router, using the provided Ethernet cable.
3. Power it on by plugging the power supply into a wall outlet and connecting it to the bridge (USB-C).
4. Press the Pair button on the bottom of the bridge.
5. At the panel, select the Pair Bridge button. This may take a few minutes.
6. Once the bridge is paired, you can configure groups to which you add smart light bulbs, and then set up a smart switch that will control that group of lights. Select the Set Up Lighting button.

Task 2: To select or create a group and add light bulbs: **IMPORTANT:** Light bulbs must be added to a “group” even if that group contains only one bulb.

1. At the panel (after tapping Set Up Lighting), select the group to which you want to add the light bulbs, or enter a name to create a new custom group. Then select Set Up Bulbs.
2.  Replace the existing bulbs with supported smart bulbs and power them on.
3. Next, at the panel you can either scan for the bulbs, or you can enter their serial number manually. This may take a few minutes.
4. When the bulbs are discovered, they are added to the group. Select Save and Continue.
5. Once the bulbs have been added to a group, you can set up the smart switch to control that group. Select the Add New Vivint Switch button. To configure another groups, repeat the steps above.

Task 3: To install the smart switch (mounting bracket and plate) to control the group of lights:

1. At the light switch you want to replace, remove the cover (save the 2 cover plate screws), and then secure the corresponding mounting bracket — toggle or rocker; 1 2 or 3 gang — to the light switch using the 2 screws.

2.  At the panel (after tapping Add New Vivint Switch), prepare the smart switch by pairing it to the network/system. Remove the battery pull tab from the switch plate. The LED light will blink green to indicate power and bootup. Press the PAIR button (or you can press any other button) to scan for the network. The LED light will breathe green.
   ( NOTE: If the network is not found after 1 minute, the network search will stop and the LED will begin blinking green again. Repeat the pairing process. If necessary, you can reset the switch by pressing and holding the button for 15 seconds.) Once successfully paired the LED will illuminate solid green for 3 seconds. Failed is solid red for 3 seconds.

3.  For double- and triple-gang switch plates, you can configure each switch with its own specific group of lights that it will control. Follow the prompts in the setup screens.

4. Once the new smart switch is paired and associated with a group of lights, it is fully set up and you can put the switch plate on the bracket. Select Save & Complete.

5. IMPORTANT: Turn the in-wall light switch to the ON position before proceeding.

6.  Attach the corresponding switch plate. Slide the lock button on the bottom of the bracket to the right to unlock it. Insert the top of switch plate in to the top of the bracket and tilt it downward until it snaps firmly in to place. Slide the lock button to the left to secure the switch plate to the bracket.

7. To set up more switches, repeat the steps above.

8. At the panel Home screen, you can tap the light bulb icon in the navigation bar at the bottom of the touchscreen to control your smart lighting. You can also access and control the lights via the app. See “Operation Overview” for an introduction to features and directions to additional Help resources.

Operation Overview / User Functionality

Once the smart lighting is set up and running, the homeowner can use both the Vivint panel and the mobile app to perform the following functions. For detailed step-by-step instructions, refer to the online Help resources (articles and video tutorials) at the Vivint Support site.

MAIN FEATURES — WHAT YOU CAN DO WITH THE SMART LIGHTS

•  Turn on/off single lights and groups of lights remotely via the panel or app, or at the switch plate
• Dim single lights and groups of lights (0%-100%) remotely via the panel or app, or by pressing and holding the ON and OFF switches
• Remove a single light or group of lights from the system
•  More…

Troubleshooting Tips

If the smart switch is offline, try these troubleshooting steps in order to resolve the issues:

•  Power cycle or reboot the bridge
•  Factory reset the bridge
•  Power cycle the switch
•  Factory reset the switch (press the button for 5 seconds)
•  Ensure switch wire termination points are clean and secure
•  Check to make sure the bulbs have not burned out

Battery Installation
The battery should last 3-5 years under normal use. If the battery is low, a notification will be indicated on the panel. IMPORTANT: Replacements batteries must comply with the UL 1642 standard. To replace the battery:

•  Remove the switch cover.
•  Place a small flathead screwdriver under the battery and pry it up and out of the battery holder.
•  Insert the replacement battery with the + sign facing out.*
• Replace the cover.
• Verify the device is functioning properly.
• The battery may fit loosely in the slot, but the cover will secure it firmly in place.

WARNING: The polarity of the battery must be observed (as shown in the image). Improper handling of lithium batteries may result in heat generation, explosion, or fire, which may lead to personal injury. Replace only with the same or equivalent battery type as recommended by the manufacturer.
Batteries must not be recharged, disassembled, or disposed of in fire. Disposal of used batteries must be made in accordance with the waste recovery and recycling regulations in your area. Keep away from small children. If batteries are swallowed, promptly see a doctor.
California Only: This Perchlorate warning applies ONLY to Manganese Dioxide Lithium cells sold or distributed in California, USA. Perchlorate material special handling may apply. (For more information, visit: www.dtsc.ca.gov/hazardouswaste/perchlorate))

Technical / Hardware Specifications

Smart Switch —

Vivint??? Part Number (P/N)| ASY-600146-001 (1 Gang); ASY-600147-001 (2 Gang); ASY-600148-001 (3 Gang)
Model Number (M/N)| LS01 (1 Gang); LS02 (2 Gang); LS03 (3 Gang)
Weight| ??? pending
Dimensions| 77 x 123 x 23.8 mm (3 x 4.8 x .94 inches)
LED| Red / Green
Connectivity| 2.4GHz Zigbee
Communication / Signal Range| Up to 150 feet
Battery| CR2032 (user-replaceable, 3-year life approx.)
Light Bulb Support| Up to 50 bulbs with a bridge, 12 bulbs without
Zigbee Radio| Silicon Labs EFR32MG22C224F512GN32
Bridge —
Vivint Part Number (P/N)| VS-ZGBHUB-100
Model Number (M/N)| BB03
Zigbee Radio| Universal Electronics UE878NMEJ-R
Bluetooth Radio| None (include this???)
LED| Red / Green / Blue / White
Ethernet| 10/100Mbps
Operating Range| Up to 150 feet
Power| DC 5V, 1A USB-C
Light Bulbs —
Standard A19 Size / E26 Threading| LED bulb, On/Off Zigbee 3.0 protocol, ≥800 lumens brightness (60W equivalent), dimmable, tunable
Flood BR30 Size / E26 Threading| LED bulb, On/Off Zigbee 3.0 protocol, ≥650 lumens brightness (65W equivalent), dimmable, tunable
Environmental —
Operating Temperature Limits| 32°F to 120°F (0°C to 49°C)
Relative Humidity| 5-95% Non-Condensing
Weatherproofing| IP65 with UV protection

Standards Certifications and Listings

For Lightbulbs: which maker?
UL 1993 & Title 20 cert. for CA|
|
FCC ID: Put in separate cells?| 2AAAS-LS01; 2AAAS-LS02; 2AAAS-LS03; 2AAAS- BB03; Lightbulbs???
IC: Put in separate cells?| 10941A-LS01; 10941A-LS02; 10941A-LS03; 10941A- BB03; Lightbulbs???

• For complete regulatory compliance information, go to: vivint.com/legal/fcc.

Wireless Product Notice
Wireless communications hardware provides reliable communication; however, there are some limitations which must be observed.

•  The transmitters are required to comply with all applicable wireless rules and regulations. As such, they have limited transmitter power and limited range.
•  Wireless signals may be blocked by radio signals that occur on or near the wireless operating frequencies.

Warning: California Proposition 65
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to: https://www.P65Warnings.ca.gov

FCC and ISED Canada Regulatory Compliance Declarations

CAUTION: Unauthorized changes or modifications could void the user’s authority to operate the equipment.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules and Industry Canada license- exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2.  This device must accept any interference received, including interference that may cause undesired operation of the device.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and the receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.

FCC (U.S.) Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm (7.9 in) between the radiator and your body.
IC (Canada) Radiation Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with greater than 20 cm (7.9 in) between the radiator and your body. .
© 2022 Vivint Inc. All Rights Reserved.
www.vivint.com
1-800-216-5232

References

• Vivint's Policies | Updated Terms And Conditions
• dtsc.ca.gov/hazardouswaste/perchlorate
• Vivint® Smart Home Security & Alarm Systems | 855.832.1550
• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>