BLAUPUNKT RVM 7.1 Rear View Monitor Owner’s Manual
- June 5, 2024
- Blaupunkt
Table of Contents
REARVIEW MONITOR
RVM 7.1 | RVM 5.1
Owner’s manual
PACKAGE CONTENTS LIST
MONITOR INSTALLATION
-
Prepare all the parts of the kit before installation.
-
Fix the screws and let the U brack tight(see below pictures).
-
Move the monitor to the desired location then fix screws on the bottom of the bracket(see below pictures).
Alternative mounting method:
- Fix the monitor and suction cup
- Lower the joystick while firmly pressing the suction plate against the parts to be connected to a fiat surface, such as the windshield/instrument panel. (When removing it, just lift the lever to remove it easily.)
- Rotate the screw to adjust the height of the monitor in an easy-to-observe manner.
Installation Location Reference
Because of the monitor bracket, it is difficult to fix it if Insttin Latin
Reference Because of the monitor bracket, it is difficult to fix it if the
dashboard is not flat, we recommend installing it on the windshield.
-
NORMAL/MIRROR FLIP
-
VERTICAL FLIPPING
For the
function of image flip, you can adjust through the menu, or press the sixth
button to choose the mode you need
the mode you need -
PARKING LINE SELECTION
Also,
you can switch parking lines on/off
Multi-language Selection
Chinese, English, Italian, Spanish, Portuguese, Japanese etc.
The Screen Proportion Adjustment
It has
two types of screen proportion, one for 16, and one for 43, you can choose the
type you like, the menu to adjust.
PAL/NTSC Switch
For TV
system, it has PAL, NTSC, or auto, you can choose the suitable system
Brightness Adjustment
For the
brightness, it has 5 modes, it has standard mode, soft mode, vivid mode, and
light mode, press the seventh button on the monitor, and you can adjust the
brightness according to what you need
CONNECTION DIAGRAM
IMPORTANT NOTES
- Some of the functions described in the instructions may be model-specific and may not be supported by every model.
- Do not modify or tamper with the device. There are no user-serviceable parts inside.
- Observe the performance limits of the device. Have repairs and, if necessary, installation done by a professional.
- Install the device only if you have needed experience installing such devices and are familiar with the vehicle’s electrical system. Observe the information marked on the unit connections.
- Ensure that all wires transfer the correct signals or voltages.
- The installation of the radio must not interfere with or prevent the activation of airbags and other safety devices and/or controls.
- Disconnect the vehicle battery (negative terminal, ground) before installing the device, as doing otherwise may cause malfunctions or damage to the device or the vehicle electronics. Observe the vehicle manufacturer’s safety instructions (airbag, alarm system, on-board computer, immobilizer, etc.).
- The rear (front) view camera functions technically as a driver assistance device, which cannot be taken as a substitute for the driver’s responsibility when operating the vehicle.
- To keep the camera/monitor working properly, please clean the camera/ monitor regularly to free it from dirt, water drops, snowdrops, etc.
- Although the camera is designed to be waterproof, please do NOT use a high-pressure water jet to wash the camera as this may break the glass lens.
- Keep the cables of the camera/monitor away from high-temperature objects such as engine or exhaust.
- If the camera model you have comes without in-built LED lights, please turn on your license plate light for better vision at night or in dark areas.
- The camera/monitor are applicable to vehicles with DC 12V power output (10% higher or lower allowed), please do NOT use the 5.1 model on vehicles with DC 24V or other power output out of this range, otherwise, it is very likely to get burned.
- The specifications of the camera/monitor are subject to change without prior notice.
Competence Center Car Multimedia & Foldable E-Bikes
Evo-Sales GmbH Hastenbecker Weg 33 31785 Hameln/Deutschland
www.blaupunkt.com
Subject to technical changes, errors, and misprints.
This material may only be reproduced, copied, or distributed for personal use.
© Evo-Sales GmbH – all rights reserved.