EPOMAKER EVERGLIDE SK68 Wired and Wireless Mechanical Keyboard Kit User Guide
- June 5, 2024
- EPOMAKER
Table of Contents
EVERGLIDE SK68 Wired and Wireless Mechanical Keyboard Kit
User Guide
65% Hot-Swap Wired/Wireless Mechanical Keyboard Kit
This Quick Guide is an introduction to the use and functionality of the
EPOMAKER Everglide SK68
For the software download, please visit the official epomaker website at
https://epomaker.com/pages/software-downloads
Should you require more assistance please email us at
support@epomaker.com
SHORTCUTS
| FN + O | Long press 5s to restore the default setting |
|---|---|
| FN + V | User-defined Mode 1 |
| FN + B | User-defined Mode 2 |
| FN + N | Standard Layer |
| FN + M | Switch to Mac mode |
| FN + DEL | Mute |
| FN+LEFT CTRL | Battery Status (green for high and red for low) |
| FN + SPACEBAR | Calculator |
| FN + PAGE UP | VOL- |
| FN + PAGE DOWN | VOL+ |
| FN + SPACE | Play/Pause |
| FN +← | Last Song |
| FN + → | Next Song |
| FN + WIN | Long press for 5s to Lock/Unlock the Win key |
DOUBLE-CLICK
THE SPACEBAR| Wake keyboard up from sleep
BACKLIGHT SETTINGS
| FN + TAB | Toggle backlight effects |
|---|---|
| FN + CAPSLOCK | Toggle underflow effects |
| FN + BACKSPACE | Turn on/off the RGB |
| FN + K | Long press for 5s to turn off the RGB (Wireless mode) |
| FN + H | Turn off the lights in wireless mode |
| FN + | Brightness+ |
| FN + | Brightness- |
FUNCTION GUIDE
CHANGE RGB EFFECTS
Pressing FN+Tab at the same time allows you to switch the RGB effect of your
Everglide SK68 keyboard kit.
PAIRING BLUETOOTH
Long Press FN+R/T/Y for 3 seconds, the keyboard will start pairing, and the
light will flash and stays on 10s. If there’s no connection, the keyboard will
enter into sleep mode.
DRIVER RUNTIME ENVIRONMENT
Windows 7 or later, Windows 10 is recommended.
PRODUCT SPECIFICATIONS
| NUMBER OF KEYS | 68 KEYS |
|---|---|
| HOT-SWAP | YES |
| BACKLIGHT | RGB BACKLIGHT |
| CONNECTION | USB-C, BLUETOOTH 5.0 |
| COMPATIBILITY | WINDOWS/MAC |
| BATTERY | 6000mAh |
| PRODUCT WEIGHT | AROUND 0.65KG |
| PRODUCT DIMENSIONS | 329 x 116 x 31 m |
REPLACING KEYCAPS AND SWITCHES
For a full guide on how to remove keycaps and switches scan the QR Code or
type in your browser:
Remove Switches
- Grab your Switch Removal Tool and align the gripping teeth vertically (on the Y-Axis) at the center of the switch, as shown in the example graphic above.
- Grab the switch with the Switch Puller and apply pressure until the switch releases itself from the plate.
- Using firm but gentle force pull the switch away from the keyboard using a vertical motion.
Install Switches
- Check that all the switch metallic pins are perfectly straight and clean.
- Align the switch vertically to have the Gateron logo facing north. The pins should align themselves to the keyboard PBC.
- Press the switch down until you hear a click. This means your switch clips have attached themselves to the keyboard plate.
- Inspect the switch to ensure it’s properly attached to your keyboard, and test it.
Note: If the key doesn’t work it’s possible you may have bent one of the
switches while installing it. Pull the switch out and repeat the process.
Pins may be damaged beyond repair and need replacement if this process is not
done correctly.
Never apply excessive force when replacing keycaps or switches. If you cannot
remove or install keycaps or switches please contact customer service as soon
as possible to avoid damage to the keyboard due to operating errors.
TECHNICAL ASSISTANCE
For technical assistance, please email to
support@epomaker.com with your purchase order
number and a detailed description of your issue.
We normally respond to inquiries within 24 hours. If you purchased your
keyboard from a distributor or not from any official store of Epomaker, please
contact them directly for any additional help.
COMMUNITY FORUMS
Join our community and learn together with other keyboard enthusiasts.
| https://discord.gg/2q3Z7C2
---|---
| https://www.reddit.com/r/Epomaker/
WARRANTY
EPOMAKER’s Warranty covers any factory defects that might affect the proper
functionality of your purchase. It doesn’t cover any damage that may occur
from normal wear and tear. If your product is defective we will send you a
replacement unit. Replacement units might require you to send the defective
unit back to Epomaker.
We provide a 1-year warranty for our products when bought from our website
(EPOMAKER.com). Your item will not be covered by your 1-year warranty if the
inspection shows any sign of modification or changes unsupported by the
original product, these include: Changing internal components, Assembling and
reassembling the product, and Replacing Batteries, etc.
We will ONLY cover the item if it is bought from our official stores. You do
not have a warranty with us if you bought the item from another reseller or
likewise. Please contact the store that you bought your product from to
resolve issues.
https://epomaker.com/pages/software-downloads
Made in China
Manufacturer: Shenzhen Changyun Technology Co., Ltd.
Address: Seventh Floor, Kai Daer Building, No.168 Tongsha
Road, Xili Street, Nanshan District, Shenzhen, Guangdong, CN
Email: support@epomaker.com
Web: www.epomaker.com APEX CE SPECIALISTS LIMITED
Address: UNIT 3D NORTH POINT HOUSE, NORTH POINT
BUSINESS PARK, NEW MALLOW ROAD CORK, T23 AT2P,
IRELAND
Contact: Wells
Tel: +353212066339
Email: info@apex-ce.com 
References
- ce.com
- DIY Guide: How to Replace Your Mechanical Keyboard Switches – epomaker
- Software
- Epomaker
- Epomaker
- DIY Guide: How to Replace Your Mechanical Keyboard Switches
- Software
- Reddit - Dive into anything
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>