Rebel RB-0702 Router 4G LTE Lechpol B2B Owner’s Manual
- June 13, 2024
- Rebel
Table of Contents
COMP
4G LTE ROUTER
OWNER’S MANUAL
model: RB-0702
RB-0702 Router 4G LTE Lechpol B2B
| 1 | Reset button (press and hold) |
|---|---|
| 2 | Indicator lights |
| 3 | MicroSIM card slot |
| 4 | Antenna sockets |
| 5 | Power supply socket |
| 6 | Ethernet socket |
| 7 | USB-C socket (for service only) |
SAFETY INSTRUCTIONS
Before use, read the contents of the manual carefully and keep it for future reference.
- Protect the product from moisture, water and other liquids. Do not use or store the device at excessively high temperatures. Protect the product from direct sunlight and heat sources.
- Keep the device out of the reach of children.
- The device is intended for indoor use only.
- It is forbidden to repair the equipment on your own. In case of damage, contact an authorized service center for inspection/repair.
- ALWAYS disconnect the device from the power source before cleaning.
- Clean the device only with a soft, slightly damp cloth. Do not use chemicals or detergents to clean this device.
LEDs
| Diode | Status | Meaning |
|---|---|---|
| Lights up | The device is connected to the power supply | |
| Flashes | Wi-Fi works, no connected devices | |
| Lights up | Wi-Fi works, one or more devices are connected to the network | |
| Lights up | Connection to the device via Ethernet | |
| Flashes | Data transmission | |
| Lights up green | 4G connection | |
| Lights up blue | HSPA+ connection | |
| Glows yellow | GSM/EDGE connection | |
| Lights up red | No SIM card | |
| Flashing red | Network searching / PIN code lock |
CONFIGURATION
Before starting the device, remove the antenna jack cover and screw the
antennas to the jacks.
SIM card installation
Slide the SIM card into the SIM slot on the bottom of the device. Note the
pictogram next to the slot, which indicates the correct orientation of the SIM
card indentation.
Note: use microSIM cards only.
Connecting
Wired:
- Connect the Ethernet cable to the socket and to the socket on the computer.
Wireless:
- Connect to the router’s WiFi network. SSID of the router: „RB0702_[ssid]”.
Network configuration
- If the SIM card is not PIN-locked, just connect the router to power. After a while, the connection will be established (indicated by the 4G LED glowing green). You can use the Internet wirelessly or wired.
• If the SIM card is locked with a PIN code:
- Once the router is connected, open a web browser and type in http://192.168.199.1.
- Enter the PIN code.
- Log in to the configuration page (default login and password is “admin”).
- After logging in, the connection will be automatically established. If this does not happen, press the Connect button.
SPECIFICATION
- Wi-Fi standard: 802.11 b/g/n (2,4 GHz)
- Network: FDD-LTE/TDD-LTE/WCDMA
- Wi-Fi chipset: MT6735WM
- Supports up to 10 users simultaneously
- Security: WPA-PSK, WPA2-PSK
- Supported OS: Windows XP, Vista, 7, 8, 10, 11
- microSIM card slot
- Port Ethernet: 10/100 Mb/s
- Antenna: 2x external
- Power supply: 12 V / 1 A
- Working temperature: 0°C ~ 55°C
- Dimensions: 146 x 105 x 32 mm
- Weight: 155 g
Lechpol Electronics Leszek Sp.k. hereby declares that router RB-0702 is
consistent with directive 2014/53/UE.
Full text of the EU Declaration of Conformity is available at following
Internet address: www.lechpol.pl.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems) This marking shown on the product or its literature,
indicates that it should not be disposed with other household wastes at the
end of its working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from other types
of wastes and recycle it responsibly to promote the sustainable reuse of
material resources. Household users should contact either the retailer where
they purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed with
other commercial wastes for disposal.
Made in China for Lechpol Electronics Leszek Sp.k., ul.
Garwolińska 1, 08-400 Miętne. COMP
www.rebelelectro.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>