Laserliner 082 030 ThermoTester Instruction Manual
- June 5, 2024
- Laserliner
Table of Contents
Laserliner 082 030 ThermoTester
Completely read through the operating instructions, the „Warranty and Additional Information“ booklet as well as the latest information under the internet link at the end of these instructions. Follow the instructions they contain. This docu-ment must be kept in a safe place and passed on together with the device.
Function / application
The digital thermometer features an integrated NTC sensor which is used to measure temperature and temperature differences. The thermometer is used to measure the temperature of bulk, liquid or soft materials in all standard household, gastronomy, trade, craft and industrial applications.
General safety instructions
- The device must only be used in accordance with its intended purpose and within the scope of the specifications.
- Measuring instruments and accessories are not toys. Keep out of reach of children.
- The structure of the device must not be modified in any way.
- Do not expose the device to mechanical stress, extreme temperatures, moisture or significant vibration.
- The measuring instrument must not be used in closed ovens.
- Thoroughly clean the sensor before and after use.
- The measuring instrument is not water tight. Only dip the measuring probe into the material up to approx. 10 mm below the casing.
- Only hold the thermometer by the casing. Do not touch the test probe, it can become very hot during the measuring procedure.
- Always replace the protective cover on the measuring probe when not in use.
- Do not use the measuring probe with an external voltage. Exercise extreme caution when working with voltages higher than 24V AC/60 V DC. Touching the electrical conductors at such voltages poses a risk of life-threatening electric shocks.
Safety instructions
Dealing with electromagnetic radiation
- The measuring device complies with electromagnetic compatibility regulations and limit values in accordance with EMC-Directive 2014/30/EU.
- Local operating restrictions – for example, in hospitals, aircraft, petrol stations or in the vicinity of people with pacemakers – may apply. Electronic devices can potentially cause hazards or interference or be subject to hazards or interference.
- The measuring accuracy may be affected when working close to high voltages or high electromagnetic alternating fields.
Inserting the batteries
Open battery compartment and insert batteries corresponding to installation
symbols. Ensure correct polarity. 
ON/OFF Auto-OFF:
approx. 20 min.
Setting unit
To set the required temperature unit, press and hold the „°C/°F“ button until
the corresponding symbol appears in the display. 
Hold/Max/Min
Press
the „Hold“ button to hold the current measured value in the display
(Hold flashes in display).
To determine the maximum or minimum temperature during a measurement, press
and hold the „Hold“ button until „MAX“ or „MIN“ flashes in the display. Normal
measuring mode is set when no function is flashing in the
display.
„- – °C“ will be displayed if the measured temperature is outside the
measuring range.
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents, scouring agents and solvents. Remove the battery(ies) before storing for longer periods. Store the device in a clean and dry place.
Technical data
| Measuring range | -40°C … 250°C (-40°F … 482°F) |
|---|---|
| Accuracy | 1,5% ± 2°C (± 35.6°F) |
| Resolution | 0,1° |
| Measuring rate | 2 seconds |
| Automatic switch-off | approx. 20 minutes |
| Power supply | 1 x 1.5V (type LR44) |
Operating conditions
| 0°C … 40°C (32°F … 104°F), max. humidity 80%rH, no condensation, max.
working altitude 2000 m above sea level
Storage conditions| -10°C … 60°C (14°F … 140°F),
max. humidity 80%rH
Length NTC sensor| 117 mm
Dimensions (W x H x D)| 33 x 210 x 20 mm
Weight (incl. battery)| 40 g
Subject to technical alterations. Rev18W23
EU directives and disposal
This device complies with all necessary standards
for the free movement of goods within the EU.
This product is an electric device and must be collected separately for
disposal according to the European Directive on waste electrical and
electronic equipment.
Further safety and supplementary notices at::
http://laserliner.com/info?an=thetes