HYUNDAI RAC 312 AM-FM Alarm Clock Radio Instruction Manual

HYUNDAI RAC 312 AM-FM Alarm Clock Radio

LOCATION OF CONTROLS

1. Alarm Set Button
2. Time Set Button
3. Sleep Set Button
4. Power cord
5. FM Antenna
6. Snooze Button
7. Hour Set Button
8. Minute Set Button
9. Volume Control
10. Band Selector
11. Tuning Control
12. LED Display
13. Function Selector
14. Auto Indicator
15. Battery Door
16. Hi-Low Dimmer Selector

REAL TIME SETTING

1. Set the Function Selector (13) to”OFF”. Connect the mains lead to the power supply.
   The clock display will flash on and off indicating a power interruption and that the displayed time is incorrect.

2. To set the correct time, press the Time Set Button (2) and Hour Set Button (7), or Minute Set Button (8), together, until the correct time is displayed.

3. Open the Battery Door (15) on the back of the unit and put in a 6LR61/6F22 (or equivalent) 9- volt battery (battery not included). The purpose of this battery is to store the information relating to alarm time and to keep the clock functioning in the event of disconnection from the mains supply or power interruption. Should this occur, the clock would continue to keep time, but will not display.

Note:

• The clock accuracy will decrease due to the voltage drop of the backup battery.
  If no backup battery is installed or the power interruption is prolonged, time re-set will be required.

• When operating from battery only, the clock will only remain accurate for a short period of time. It is important that the mains supply is restored as soon as possible.

ALARM TIME SETTING

1. Press the Alarm Set Button (1) and simultaneously press the Hour Set Button (7) or Minute Set Button (8) as appropriate until the required alarm time is reached.
2. To double check the alarm time, simply press the Alarm Set Button (1) then the display will show the pre-set alarm time.

RADIO OPERATION

For AM reception, this unit uses an internal directional aerial, rotate the unit for best reception. For FM reception, the wire FM Antenna (5) on the back of the unit should be fully unwound.

1. Set the Function Selector (13) to the “ON” position.
2. Set the Band Selector (10) to the required waveband.
3. Use the Tuning Control (11) to select the desired station.
4. Adjust the Volume Control (9) to the desired listening level.
5. To turn off the radio, set the Function Selector (13) to ”OFF”. If the radio does not switch off this may be caused by inadvertent operation of SLEEP function. To cancel this, press the Snooze Button (6) once.

WAKE TO RADIO
Having selected your desired station and adjusted the desired listening level, proceed as follows:

1. Follow the instructions for “ALARM TIME SETTING” above.
2. When the desired alarm time has been selected, set the Function Selector (13) to the “AUTO” position.
3. The radio will switch on automatically at the pre-set alarm time.
4. The alarm can be temporarily stopped for 9 minutes by pressing the Snooze Button (6) once.
5. Press the Alarm Set Button (1) once to turn off the radio. The alarm will activate again at the set time on the following day unless the Function Selector (13) is set to “OFF” (AUTO indicator (14) lights off).

WAKE TO BUzzER

1. Follow the instructions for “ALARM TIME SETTING” above.
2. When the desired alarm time has been selected, set the Function Selector (13) to the “AL.” position.
3. The alarm tone will switch on automatically at the pre-set alarm time.
4. The alarm can be temporarily stopped for 9 minutes by pressing the Snooze Button (6) once.
5. Press the Alarm Set Button (1) once to turn off the buzzer.
   The alarm will activate again at the set time on the following day unless the Function Selector (13) is set to “OFF” (AUTO indicator (14) lights off).

SLEEP TO RADIO
The radio can be set to switch off automatically after a period of time from 1 minute to 1 hour 59 minutes, by following this procedure:-

1. Set the FUNCTION Selector (13) to “OFF” position or, if the alarm is to be activated, the “AUTO” position or “AL.” position.
2. Press the Sleep Set Button (3) and simultaneously press the Minute Set Button (8), or Hour Set Button (7) until the display shows the exact sleep time you wish the radio to continue to play before switch off.
3. The radio will turn off automatically after the pre-set sleep time has elapsed.
4. To switch off the radio before the end of the sleep time period, simply press the Snooze Button (6) once.

ADJUSTING THE BRIGHTNESS OF THE DISPLAY (DIMMER CONTROL)

Switch the Hi-Low Dimmer Selector (16) to High or Low position as required.

CLEANING
Clean the cabinet with a soft cloth moistened with water or mild detergent.
Do not use solvents such as alcohol, benzene or thinner, as they may damage the cabinet finish. Make sure to disconnect the mains lead from the supply before cleaning.

CAUTION

1. Ensure minimum distances around the apparatus for sufficient ventilation.
   Do not place the product in closed bookcases or racks without proper ventilation. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.

2. No naked flame sources, such as lighted candles, should be placed on the apparatus.

3. It shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

4. Where the mains plug is used as the disconnect device, the disconnect device shall remain readily operable.

5. The use of apparatus in moderate climates.

6. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Attention should be drawn to the environmental aspects of battery disposal.

7. The Location of the rating plate is affixed on the back surface of the apparatus.

TECHNICAL SPECIFICATION

• Rated voltage: AC 230 V ~ 50 Hz
• Battery (for Clock Back-up): 1x 9 V Battery Size 6LR61 / 6F22 (or equivalent) (not included)
• Radio frequency: AM 530 – 1600 kHz FM 88 – 108 MHz
• Dimensions:180 x 100 x 60 mm
• Weight (NET): 420 g

We reserve the right to change technical specifications.

WARNING: Do not use this product near water, in wet areas to avoid fire or injury of electric current. Always turn off the product when you don’t use it or before a revision. There aren’t any parts in this appliance which are repairable by consumer. Always appeal to a qualified authorized service. The product is under a dangerous tension.

Old electrical appliances, used batteries and accumulators disposal

This symbol appearing on the product, on the product accessories
or on the product packing means that the product must not be disposed
as household waste. When the product/ battery durability is over, please, deliver the product or battery (if it is enclosed) to the respective collection point, where the electrical appliances or batteries will be recycled. The places, where the used electrical appliances are collected, exist in the European Union and in other European countries as well. By proper disposal of the product you can prevent possible negative impact on environment and human health, which might otherwise occur as a consequence of improper manipulation with the product or battery/ accumulator. Recycling of materials contributes to protection of natural resources. Therefore, please,
do not throw the old electrical appliances and batteries/ accumulators in the household waste. Information, where it is possible to leave the old electrical appliances for free, is provided at your local authority, at the store where you have bought the product. Information, where you can leave the batteries and accumulators for free, is provided to you at the store, at your local authority.

References

• ASEKOL
• Úvod - ECOBAT
• Hyundai Electronics– Hyundai CZ
• SEWA - OZV | elektroodpad | batérie | obaly

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>