bluebuilt BBRWM4875 Swivel Wall Mount 48 – 75 Inches User Guide

June 5, 2024
bluebuilt

bluebuilt BBRWM4875 Swivel Wall Mount 48 – 75 Inches

Instructions

bluebuilt-BBRWM4875-Swivel-Wall-Mount-
Inches-1

In the box

1 Bag of screws and plugs for the wall, 2 bag of screws, 3 washers, spacers for the TV, spirit level, 4 TV frame, 5 wall mount, 6 adapter, 7 a template, 8 open-end wrench, hex key,
9 velcro for your cables, 10 small screws.

Your own tools
Cross-head screwdriver, pipe locator, 5 mm drill, 10 mm drill, pencil, tape measure, hammer, impact or concrete drill and a cup of coffee.

Suitable surface area: Solid brick
Solid concrete

Prior to drilling:
Use the pipe locator to check if there aren’t any pipes or cables behind the wall.

Need help?
Call 010 798 89 99 or visit Coolblue.nl/en/customer- service
Coolblue isn’t liable for any damage, accidents, or arguments with boy/girlfriends as a result of incorrect installation. Not sure if you can do this on your own? Ask a skilled installation expert for advice.

Installation

PLACE THE FRAMES
Place your TV on a blanket and place the TV frames 4 on your TV as pictured. Look in bags M-A through M-H 2 for the screw that fits your TV. You only need 1 set of screws.

INSTALL THE FRAMES
Attach the frame to the TV with screws. Place washer (M-I) 3 or spacer (M-J or M-K) 3 in between.

MARK DOWN THE WALL
Draw an X on the wall where the middle of the TV should align. Place the template 7 on the wall and draw the drill holes using the spirit level (M-L) 3.

DRILL
Drill with precision by first using the 5mm drill, and then the 10mm drill. Drill as deep as the screws (W-A) 1 are in length. Hammer the plugs (W-B) 1 into the drill holes. bluebuilt-BBRWM4875-Swivel-Wall-Mount-
Inches-2

INSTALL ADAPTER
Slide the 2 separate parts 6 into the adapter. Use the small screws to secure them in place with the hex key.

HANG WALL MOUNT
Level and attach the wall mount to the wall with screws and use the rings (W-C) 3 in between.
Level and attach the adapter to the wall mount.

HANG TELEVISION
Lift the TV with 2 people and attach it to the adapter.
Tighten the screws on the bottom of the mount to firmly secure the television in place.

TILT
Tilt the mount to the desired angle and secure it in place with the hex key.
Done! Pat yourself on the back, turn on the TV, and bask in the glory of your accomplishment. bluebuilt-BBRWM4875-Swivel-Wall-Mount-
Inches-3

Need help?
Call 010 798 89 99 or visit Coolblue.nl/en/customer-service

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals