UBIQUITI UAP-IW-HD UniFi In-Wall HD Access Point User Guide

: June 5, 2024
: UBIQUITI

UBIQUITI UAP-IW-HD UniFi In-Wall HD Access Point

Installation Requirements

Pre installed electrical wall box.
Category 5 or above UTP cabling approved for indoor use.
Phillips and flathead screwdrivers.
T10 Torx bit for Torx Screw option.

UniFi Controller is recommended for managing the UAP-IW HD and is available for download at: ui.com/download/unifi

System Requirements

Linux, Mac Os X, or Microsoft Windows 7/8/10
Java Runtime Environment 1.8 or above
Web Browser: Google Chrome (Other browsers may have limited functionality.
UniFi Controller software v5.7or newer available at: ui.com/download/lunifi

Hardware Overview

Back Panel

UBIQUITI UAP-IW-HD UniFi In-Wall HD Access Point 1

PoE In+ Data

10/100/1000 Ethernet port supports data and 802.3af PoE input. The UAP-IW-HD itself requires 11W. 802.3at PoE+ input is required to use PoE passthrough. Connect this port to a UniFi Switch with PoE that is connected to your LAN and DHCP server.

PoE Out + LAN 1

10/100/1000 Ethernet port supports data and PoE passthrough requires 802.3at PoE+ input. The maximum PoE passthrough output is 12W.

Note
To power and connect an 802.3af device to the LAN, you must use 802 3at PoF input.

LAN 2 LAN 4

These three 10/100/1000 Ethernet ports support data only. Used to connect client devices to the LAN.

Reset

The Reset button serves two functions for the UAP-IW-HD

Restart Press and release the Reset button quickly.
Restore to Factory Default Settings.
Press and hold the Reset button for more than five seconds.

Side Panel

Security Screw Optional
The Security Screw secures the Cover Plate after installation. You have the option to use the included Torx shown or Phillips Security Screw.

LED

Security

Tab In addition to the optional Security Screw, the Security Tab helps to secure the Cover Plate after installation. If you need to remove it, use a flathead screwdriver to depress the Security Tab while detaching the Cover Plate.

Back Plate

The Back Plate offers a variety of mounting holes for use with different wall boxes. Here are a few examples with the appropriate mounting holes outlined in blue.

Europe UBIQUITI UAP-IW-HD UniFi In-Wall HD Access Point
7

Hardware Installation

An electrical wall box should be pre installed with an Ethernet cable running from the box to a UniFi Switch with PoE.

UBIQUITI UAP-IW-HD UniFi In-Wall HD Access Point 12

Software Installation

Download and install the latest version of the UniFi Controller software. Launch it and follow the on-screen instructions. The software and step-by-step instructions in the User Guide are available at: ui.com/download/unifi After you have installed the software and run the UniFi Installation Wizard, a login screen will appear for the UniFi Controller management interface. Enter the username and password that you created and click Sign In.

You can manage your wireless network and view network statistics using the UniFi Controller management interface. For information on configuring and using the Unifi Controller software.

Mobile App Installation

Ubiquiti also offers the UniFi app, which is available from the App Store iOS or Google Play Store (Android). You can use it to provision a Unifi AP for basic functionality without configuring a Unifi Controller. It also allows seamless provisioning of APs for remote controllers (controllers not on the same Layer 2 network and easy access to local controllers and those monitored on unifi.ui.com

Specifications

UAP-IW-HD

Dimensions| 139.7 x 86.7 x 25.75 mm

5.5 x 3.41 x 1.01

|
---|---
Max. Power Consum× ption

Click for with PoE Passthrough able of Contents

| 11W

23W

Operating Frequency| 2.4 GHz 5 GHz
Max. TX Power 2.4 GHz 5 GHz| 23 dBm

26 dBm

MIMO 2.4 GHz 5 GHz| 2 x 2

4 x 4

Max Data Speed 2.4 GHz 5 GHz| 300 Mbps

1733 Mbps

Safety Notices
Only use attachments/accessories specified by the manufacturer

WARNING
Do not use this product in location that can be submerged by water. Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.

Compliance is required with respect to voltage, frequency, and current requirements indicated on abel. Connection to a different power source than those specified may result in damage to the equipment or pose a fire hazard if the limitations are not Click for Table of Contents. Inere are no operaor serviceable parts inside this equipment. Service should be provided only by a qualified service technician. Limited Warranty ui.com/support/warranty The limited warranty requires the use of arbitration to resolve disputes on an individual basis and where applicable, specify arbitration instead of jury trials or class actions.

Limited Warranty
ui.com/support/warranty

The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specify arbitration instead of jury trials or class actions.

Compliance
FCC
Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against narmful interference wnen the equipment is operated in à commercial environment. Ihis equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. neat e reasona Te This radio transmitter has been approved by FCC.

ISED Canada
CAN ICES 3 A/NMB-3A

This device complies with ISED Canada licence-exempt RSS standards. Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the

This radio transmitter has been approved by ISED Canada.

IMPORTANT NOTE
Radiation Exposure Statement
This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitte.

Brazil

AT	BE	BG	CY	CZ	DE	DK	EE	EL	ES	FI	FR	HR	HU
IE	IT	LV	LT	LU	MT	NL	PL	PT	RO	SE	SI	SK	UK

Note
This device meets Max. TX power limit per ETSI regulations. The following apply to products that operate in the 5 GHz frequency range This device is restricted to indoor use only when operating in the 5150 – 5350 MHz frequency range within all member states.This device is restricted to indoor use only when operating in the 5150 – 5350 MHz frequency range within all member states.

WEEE Compliance Statement

Declaration of Conformity
Online Resources

UBIQUITI UAP-IW-HD UniFi In-Wall HD Access Point 16

Documents / Resources

| UBIQUITI UAP-IW-HD UniFi In-Wall HD Access Point [pdf] User Guide
UAP-IW-HD, UniFi In-Wall HD Access Point, HD Access Point, Access Point, UAP- IW-HD, UniFi In-Wall
---|---