PDQ 6400C and 6400CF CVR Exit Instruction Manual
- October 27, 2023
- PDQ
Table of Contents
PDQ 6400C and 6400CF CVR Exit
DEVICE
MACHINE SCREWS:
USE #7 OR 13/64″ DRILL AND 1/4-20 TAP
NOTES:
- VERIFY PRINTED TO SCALE
- SEE TRIM TEMPLATE (IF APPLICABLE) FOR RELATED MACHINING DETAILS
- DIMENSION “X” SIZED FOR DOOR. REFER TO DEVICE INSTRUCTIONS WHEN CUTTING DOWN FOR A NARROWER OPENING
- CHECK PDQ WEBSITE FOR THE MOST RECENT REVISION WWW.PDQLOCKS.COM
- MINIMUM STILE WIDTH: 3-1/2″
INSTALLATION
FOR DOORS WITH 1/2″ THRESHOLD, MEASURE 1-9/16″ TO LOWER THE STRIKE MOUNTING HOLE FROM TOP OF THE THRESHOLD, USE THE UPPER PINHOLE FOR THE BOTTOM LATCH
PDQ Manufacturing2230 Embassy Dr.Lancaster, PA 17603833-273-7832833-2 PDQTECH www.pdqlocks.com
References
Read User Manual Online (PDF format)
Loading......