Lowe s 67054731 LED Pendant Light Installation Guide
- June 5, 2024
- Lowe s
Table of Contents
Lowe s 67054731 LED Pendant Light
Product Specifications
- Power: Battery operated (Two AAA batteries, not included)
- Light Color Temperature: 3000K-6000K
- Brightness Levels: Adjustable
- Night Light Mode: Yes
- Remote Control Function: Yes
FAQ
Frequently Asked Questions
- Q: How do I change the color temperature of the light?
- A: You can adjust the color temperature by pressing the color temperature adjustable buttons on the remote control to cycle through different options.
- Q: How do I activate night light mode?
- A: Simply short press the Night Light Key on the remote control to enter night light mode at approximately 10% brightness.
- Q: What should I do if the delayed shutdown mode is accidentally activated?
- A: To clear the delayed shutdown mode, press any other key on the remote control while in time delay mode to cancel the timer.
Product Overview
Installation Instructions
Installation Manual
Make sure the power is disconnected
- Remove the wall plate and fix it on the wall.
- Connect the wires, pay attention to the N and L wires.
- Fix the base on the wall plate and tighten the screws on both sides.
- Remove side mounts and securely mount to wall.
- Height adjustable as needed.
Remote control function introduction
- on/off switch
- Night Light Key
- Short press to enter night light mode (approx. 10% brightness)
- Brightness adjustable +
- Brightness adjustable –
- Color temperature switching
- Actual sequence 4000K-6000K-3000K
- Delay light off key
- Press this button briefly to enter the delayed shutdown mode
- (Luminaire blinks once and delays for 30 minutes before completely shutting down the output).
- Pressing any other key while in time delay mode will clear the time delay mode.
- Color temperature adjustable +
- Color temperature adjustable –
- Need Two AAA batteries (Battery not included)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>