mestic MW-120 Washing Machine Centrifuge User Manual

Washing machine centrifuge MW-120
Washing machine
MW-120

MW-120 Washing Machine Centrifuge

SMART ADVENTURE User manual

Please read this instruction manual carefully to ensure correct use of the machine
Thank you for purchasing this DMR Semi Auto Washing Machine.
The design of this product has adopted the special patent technology of cabinet integration. The entire body casing is made of plastic and this ensures that your DMR semi auto washing machines will never be rust eaten. The washer is  relatively lighter and space saving as compared to other general twin-tub washing machines.
Through the integration of new technology, this washer with large wave pulsator and new water flow, will not only produce less twisting of the clothing but also better cleaning and washing effect. The functions of water inlet, sprinkling,  spin-dry and water flow are also made available to save time, labor and water usage.
We trust that you will find your purchase of this beautifully designed and dignified-looking semi auto washing machine to your satisfaction

Technology parameter and specifications

Water capacity| Input power| Power source| Size (LxWxH)|

Weight

---|---|---|---|---
high| low| wash| dry| voltage| hertz| 655x405x760 (mm)| 15kg
36 L| 32 L| 250 W| 120 W| 220 V| 50 Hz

Troubleshooting

Replace the clothes in the tub
There is something jammed between the pulsator and the wash tub| Remove the jammed object(s)
Water leaks from the wash tub| Wash tub was not connected tightly to the hose| Reconnect and tighten the hose
Spin-dry basket does not rotate| The slight switch is in loose contact| Adjust the contactor of the switch
The fixed screw of spin dry basket or shaft coupling is loose| Tighten the screw
The fixed screw of spin dry basket or shaft coupling is loose| Remove the textile
Brake dragline is loose| Tighten the dragline
The spin tub does not drain| Something had cropped into the space between spin tub and spin dry basket| Remove the object

Points of attention:

• When the problem cannot be resolved, please contact the Service Center.
• For your own safety, ensure that the ground connection is correct.
• Never put your hands into the spin tub whilst it is working.
• Never wash textiles containing volatile materials in order to avoid machine damage or water blockage due to stains.
• The timer should always be turned clock wise
• When abnormal sounds/movements occur during operation, stop the washing machine as soon as possible and check. (Please refer to troubleshooting)
• When washing, the water temperature should be below 60˚C, otherwise, the plastic components may be deformed.

Maintenance

After use, pull out the plug to prevent accidents.

When cleaning the washing machine, use a soft cloth; this will prevent scratching of the cabinet surface.

Do not put the washing machine outdoors or in damp areas, such as bathroom.

Do not put heavy objects on top of the washing machine.

Do not place the washing machine near to heat generating items such as gas cookers.

1. Spin cap
2. Spin tub
3. Spin cover
4. Water inlet
5. Control panel
6. Pulsator
7. Wash cover
8. Cabinet
9. Bottom
10. Wash timer switch
11. Wash & drain selector switch
12. Spin timer switch
13. Drain hose
14. Power wire
15. Back cover

Washing Instructions
Preparation

1. The machine should be placed on a flat ground.
2. The plug seat should have safety ground connection.
3. Lay down the overflow hose.
4. Use the water inlet hose to connect the water tap on the water inlet.
5. Adjust the water level based on the type of clothing material and its weight.
6. Turn on the power.

Washing

1. Set the “wash & drain selector switch” according to the material type and weight of clothes.
2. Set the “wash & drain selector switch” to the wash position.
3. Set the “wash timer” and place the clothes into the tub, adjust the water level to the proper position and put in the proper amount of detergent into the wash tub.
4.  Set the “wash timer”; washing machine will start washing.
5. After wash, set the “wash & drain selector switch” to the drain position to the start draining off the water.

Spinning

1. After spinning, set the water inlet hose to the water inlet of the spin tub position for 20-30 seconds.
2. According to the “spin timer” process, spinning the clothes for 1 min-5 min, repeat once or twice.

Rinsing

1. After spinning, the spin tub will stop. Open the spin cover and transfer the clothes from the spin tub to the wash tub to prepare for rinsing.
2. Repeat the washing process but do not add any detergent.

Recycling
This product bears the selective sorting symbol for waste electrical and electronic equipment This means that this product must be handled pursuant to European Directive (2012/19/EU) in order to be recycled or dismantled to minimize its impact on the environment. For further information, please contact your local or regional authorities. Electronic products not included in the selective sorting process are potentially dangerous for the environment and human heath  due to the presence of hazardous substances.
Declaration of conformity
Hereby Game Nederland B.V. declares that the device MW-120, applies all basic requirements and other relevant regulations listed in the European directive for electromagnetic compatibility (2014/30/EU) and low voltage directive (2014/35/EU). If you require a full declaration of conformity, you can contact the address listed on the backside of this manual.

Importer:
Game Nederland B.V.
Strijkviertel 27
3454 PH De Meer
The Netherlands

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>