MENUETT 011243 FRUIT CRUSHER User Guide

MENUETT 011243 FRUIT CRUSHER

SAFETY INSTRUCTIONS

WARNING!
Read all the instructions and safety instructions carefully before use.

• Do not allow children to use the product. Keep onlookers, especially children, and pets at a safe distance.
• Keep your hands, other parts of your body and loose clothes away from the moving parts-risk of personal injury.
• The product must be firmly anchored so that it cannot move or tip over when in use.
• The funnel must be correctly and firmly fitted.
• Never use your hands to clear the grinding mechanism. Use a stick or other suitable utensil.
• Use a suitable cover.
• Never put your hands under the cover when grinding
• The product does not contain any parts that can be repaired by the user.
• Maintenance, calibration and any repairs should be carried out by qualified personnel. Repairs that are not done correctly will invalidate the warranty.

NOTE: Always follow local regulations for safety at the workplace and prevention of accidents.

TECHNICAL DATA

• Capacity: 7L
• Press size: 275 x h 560 mm
• Basket size: 260 x h 195 mm

DESCRIPTION

1. Funnel
2. Drive axle
3. Square tube
4. Handle
5. Lock plate
6.  Screw M5, 4x
7. Screw M6,6x
8. Axle

ASSEMBLY

1.  Fit 18 and 1C together with the 1F screws.
2.  The screws should be fitted from outside and in.
3.  Repeat step 1 to fit 1A.
4. Fit the next part 1C.
5. Put 1E on 1C as shown in the figure and fit with the 1F screws.
6.  Repeat step 5 to fit the next 1E.
7.  Repeat step 5 to fit 1D.
8. Tighten the 1F screws fitted in steps 5, 6, and 7.
9. Press 1D down over the grinding mechanism.
10. Tighten the nuts on the flanges on each side to lock the funnel firmly in place.

USE

PREPARATIONS

1. Fit the funnel in accordance with the instructions above.
2. Fit the drive wheel for the grinding mechanism.
3. Put the fruit grinder over a suitable container and check that it is stable.
4. Check the direction of rotation of the grinding mechanism before adding fruit.
5. Wash the fruit well.
6. Put the fruit in the funnel.

TIPS

• A lot of fruit needs grinding or crushing to produce as much juice as possible. The fruit grinder can be used to grind berries, apples, pears, potatoes and other soft fruit and vegetables. The fruit grinder is not suitable for processing hard fruits and vegetables, such as sugar beets or carrots, unripe fruit or fruit wth large and/or hard stones.
• Ground apples, pears, quinces and similar fruits are especially suitable for further processing. Iheir relatively solid flesh grinds well and the resulting pulp means that more juice can be pressed out of the fruit.
• Grapes, raspberries, and raisins should not normally be ground, and neither should stone fruit. Grinding is not necessary for fruit that is soft and covered by a thin peel. Ground or crushed stone fruit produces a bitter taste and turns the juice dark brown.
• For best results, only use fresh, ripe and undamaged fruit. Remove overripe, unripe, rotten and damaged fruit. Do not use fruit with rotting patches or mold. Damaged windfalls can be used, as long as they have not begun to rot. Wash the fruit well before processing, so that no contaminants get into the pulp.

MAINTENANCE

CLEANING
Clean the fruit grinder with running water and a suitable brush after use and before long pauses. The fruit grinder can be swilled with a water hose or the equivalent. Carefully clean between the rollers.

STORAGE
Lubricate the bearings at regular intervals, especially if the fruit grinder is not going to be used for some time. Apply a thin layer of cooking oil on the metal surtaces to provide protection from corrosion.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>