TESLA TSL-SWI-DIMMER Smart Switch Dimmer Touch User Guide
- June 4, 2024
- Tesla
Table of Contents
- TESLA TSL-SWI-DIMMER Smart Switch Dimmer Touch
- Product Outline
- Indicator Light Status
- Specification
- Contents Supplied
- Tools You‘ll Need
- Installation
- APP Operation
- Troubleshooting
- INFORMATION ABOUT DISPOSAL AND RECYCLING
- EU DECLARATION OF CONFORMITY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
TESLA TSL-SWI-DIMMER Smart Switch Dimmer Touch
Product Outline
Indicator Light Status
Light Color | Light Status | Switch Status |
---|---|---|
white | LED bar with brightness level | : Light turn on |
Brightness indicator blink slowly (Breathing) | Light turn off | |
Bottom LED blink fast | Network disconnected | |
Bottom LED blink | Quick configure mode | |
Bottom LED blink slowly | AP configure mode |
Specification
- Input Power: 100~240V AC 50/60Hz
- Dimming Control: Trailing Edge Cut
- Inductive load (LED/CFL): <220W
- Resistive load (Incandescent): <300W
- Communication: WiFi 802.11 b/g/n 2.4GHz
- Control Channel: 1 CH
- Standby Power: ≤0.5W
- Working Temperature: -10°C ~ 45°C
- Working Humidity: <90%
- Button life: 500k times
- Dimension:
- 86x86x53.5mm [TSL-SWI-DIMMER]
- 86x86x43mm [TSL-SWI-DIMMERT]
Contents Supplied
Tools You‘ll Need
Installation
WARNING: RISK OF ELECTRIC SHOCK
This product installation requires handling 100-240 volt wiring. Follow each
step carefully. If any concerns handling wiring, hire a qualified electrician.
Ensure all work meets applicable local and national codes.
-
Turn Off The Breaker
Turn off the circuit break and use the electrical tester to test the power. -
**Connection Diagram
**
-
Pull Out the Knob
(Only for TSL-SWI-DIMMER)
Pull the knob upwards. -
Remove Nuts and Gaskets
(Only for TSL-SWI-DIMMER)
Remove the dimmer nuts and gaskets. -
Remove the Panel
Remove the touch panel cover of the dimmer. -
Mount the Switch
Use the screws provided. -
Attach the Wall plate
Attach the adapter to the dimmer using the screws provided and snap on the wall plate. -
Turn on the Power
Turn the power back on at the circuit breaker.
APP Operation
Preparation for use
- Tesla Smart is available for both iOS and Android OS. Search the name ‚Tesla Smart‘ in App Store or Android Market, or scan the QR-Code to download the App and register or login your account.
- Make sure that the smartphone is connected to the 2.4Ghz network.
Connect the device
- Open Tesla Smart app and click “+” sign to Add new device
- Select Switches – Tesla Smart Dimmer
- Please follow the instructions to add the Tesla Smart Dimmer step by step
Control Dimmer
- Control dimmer with APP
- Add scene mode and timing mode in the APP
Troubleshooting
- The light is Flashing or rot dimming? The Smart Dimmer switch support Dimmab-le light source only, non-Dimmerable light source may cause the light flashing or not working
- Dimmer has not power on? The smart dimmer products need to be powered by the neutral line. If there is no neutral line in the inch-Manor location, the smart dimmer can not work
- Can not connect to APP? Make sure the mobile phone and devices (gateways) in a same Wi-Fl network, and the device power an get into pair mode, make sure the device has good signal to support communication.
- How far can be controlled? Please make sure that the distance between the product and the Wi-Fi router or gateway does no- exceed 25 meters, If the partition wall is used but the material and thickness of the wall will have a greater impact communication, based on the actual situation, users can consider adjusting the location of the Wi-Fi router or gateway or increasing Wi-Fi routers or gateways to ensure normal product communication.
- Can the Dimmer still work if the network is disconnected? In the event of a network disconnection, the status indicator will flash. At this time, all APP control, smart linkage and other network functions will be invalid but the local control will not be affected.
Reset
Press and hold Switch button for 5s to reset the Dimmer and get into Quick
Configure Mode.
-
Tesla Smart Skills (Alexa)
- Log in your Alexa account on a smart phone or a computer, then tap Home>Skills & Games
- Search “Tesla Smart” and select the right one according the blue logo (same with App)
- Login the account you registered on the App in Part 2, then click “Link Now”
- The Account is linked successfully, and then tap Authorize to Complete.
Congratulations! Alexa Devices (Echo) can Control the Switch ON/OFF.
To add or delete switches, please delete or add them in the Tesla Smart App (See Part 2) and then the Alexa will synchronize auto-matically. If you cannot see the name of switches in the Devices List in Alexa Page. You can click “Discover” in Alexa page it will synchronize from the Tesla Smart App.
-
Tesla Smart Skills (Google)
-
Find “Home Control” in the main menu on the Google Home app´s home page > Home Control > tap “+”.
-
Find “Tesla Smart” in the list
-
Input your Tesla Smart account and password you registered in Part 0, then tap “Link Now”.
-
After you assign rooms for the Switch, your Switch will be listed in the Home Control page.
Control your smart dimmer through Google Home. Now you can control your smart dimmer through Google Home. -
If you set the name as “bedroom light”, the supported voice commands are as below:
-
Ok Google, turn on bedroom light.
-
Ok Google, set bedroom light to 50%.
-
INFORMATION ABOUT DISPOSAL AND RECYCLING
This product is marked with the symbol for separate collection. The pro-duct must be disposed of in accordance with the regulations for disposal of electrical and electronic equipment (Directive 2012/19/EU on waste electrical and electronic equipment). Disposal together with regular municipal waste is prohibited. Dispose of all electrical and electronic products in accordance with all local and European regulations at the designated collection points which hold the appropriate authorisation and certification in line with the local and legislative regulations. Correct disposal and recycling help to minimise impacts on the environment and human health. Further information regarding disposal can be obtained from the vendor, authorised service centre or local authorities.
EU DECLARATION OF CONFORMITY
Hereby, Witty, s.r.o declares that the radio equipment type EDM-1W-BA-EU, EDM- 1WBB-EU is in compliance with EU directives. The full text of the EU declaration of conformity is available at the following internet address: teslasmart.com/declaration
- Connectivity: Wi-Fi 2,4 GHz IEEE 802.11b/g/n
- Frequency band: 2.400 – 2.4835 MHz
- Max. radio-frequency power (EIRP): < 20 dBm
Manufacturer
- Tesla Global Limited
- Gee Chang Industrial Building, 121 Des Voeux Road Central 852 00 Hong Kong
- www.teslasmart.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>