WAMPLER MetaVerse DSP Multi Delay and Multi Effect Guitar Pedal User Guide
- June 4, 2024
- WAMPLER
Table of Contents
QUICK
REFERENCE GUIDE
MetaVerse DSP Multi Delay and Multi Effect Guitar Pedal
The Metaverse brings a powerhouse multi-delayinto Wampler’s lineup of advanced
MIDI DSP pedals. Comprising eleven of Brian Wampler’s all-time favorite
delays, the Metaverse is a full-featured, small-footprint stomp box that is
programmable, preset-capable, true stereo, offers enhanced MIDI control, and
has an expression input that you can assign to ANY of the parameters.
Just like the Terraform that came before it, the Metaverse features a user-
friendly interface that allows you to dial in your sound without endless menus
on a tiny display. Use the intuitive design to effortlessly travel throughout
Wampler’s expansive Metaverse.
The Metaverse offers complete control over every program via either MIDI CC
Messages or PC Commands. It can accept a global clock signal from a MIDI
controller. By default, the pedal is set to ‘omni channel’ mode meaning it
will accept a MIDI command on any channel. For a complete MIDI reference
guide, download the full manual from:
wamplerpedals.com/downloads
DOWNLOAD FULL MANUAL:
https://www.wamplerpedals.com/downloads/
The Metaverse can be run in either Mono or Stereo using 2-4 guitar cables. The optimum connection for this pedal will be in the effects loop of a guitar amplifier. If your amplifier doesn’t have an effects loop don’t worry – it still sounds awesome through the main input.
POWER
Connect a 9V DC Center Negative Power supply suitable for guitar pedals only, Current draw is approx 130mA. DO NOT EXCEED 9V – This pedal cannot be run at 18V. Use of an incorrect power adapter can lead to damage and void the warranty on the pedal.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>