EUROtops ELB-4111 Lock Box with LED Light Instruction Manual

: June 4, 2024
: EUROtops

Table of Contents

LOCK BOX WITH LED LIGHT
SAFETY INSTRUCTIONS
HOW TO USE IT
CARE AND MAINTENANCE
FEATURES
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

EUROtops ELB-4111 Lock Box with LED Light

LOCK BOX WITH LED LIGHT

Warning: Please read this instruction manual carefully before using the instrument and keep it for future use.

SAFETY INSTRUCTIONS

The device is intended exclusively for private and not for commercial use. Only use this device as describe in this instruction manual.
Keep it away from heat sources such as radiators, to avoid deformation of plastic parts.
Do not use coarse or abrasive sponges/cloths or steel wool to clean the appliance.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capacities, or by persons lacking in experience or knowledge, unless they are supervised or instructed on the use of this apparatus by a person responsible for their safety.Children should be supervised to ensure they do not play with this appliance.

HOW TO USE IT

Opening / closing the lock box

Lower the valve
Enter the 4-digit user code by turning the dials one by one. make sure the dials are properly aligned.
The default code is “0000”.
Pull the box to tilt it down and access the compartment (when the box is not yet fixed to a wall, use a small tool to pry the back of the box).
Put away or take your keys.
Close the lock box
Confuse the combination dials to lock the door and conceal your combination
Close the valve

Inserting and / or changing the batteries

Open the lock box following the instructions above mentioned
Open the battery compartment located inside and insert 1 CR2032 end battery. Please observe the polarity of the batteries.
Replace the battery compartment cover.
Close the lock box

Personalizing the secret code

Open the lock box following the instructions above mentioned
Remove the rubber protection to access the reset lever located inside the safe door, and slide it in the direction indicated by the arrow.
Note: The reset lever can only be moved when the dials are set to the current combination. Select the new desired combination on the open dials, keeping the door open.
Be careful with your fingers on the reset lever to prevent it from moving when setting the combination.
Note the new combination for future reference.
Check operation using the new combination.
Note: Close as the door opens and closes. Otherwise, start over from the beginning.
Slide the reset lever back to its original position and replace the rubber stopper.

DON’T FORGET TO NOTE YOUR NEW CODE AND STORE IT IN A SAFE PLACE.
TEST THE CODE AND THE OPEN BOOT LOCKING KNOB BEFORE CLOSING THE BOOT!
IN THE EVENT OF LOSS OF THE OPENING CODE, IT IS NO LONGER POSSIBLE TO OPEN IT!

Securing the lock box

Open the compartment door
Position the safe on the desired surface using a level to check if the safe is in vertical position & mark the location of the screw holes on the surface.
Remove the lock box
Drill the holes / If necessary use a hammer to place the anchoring devices
Position the lock box and its rubber base
Insert and tighten the screws
Close the compartment door
Confuse the dials to lock the door and hide your combination.

CARE AND MAINTENANCE

Clean the product only with a dry or slightly damp, lint-free cloth.
Do not use abrasive cleaners to clean the unit.

FEATURES

Material: Zinc alloy (2 mm), rubber, plastic
Overall dimension: 14.1 x 8.3 x 5.2 cm.
Useful compartment dimension: 7.2 x 7.7 x 3.8 cm
Accessories included: 4 screws, 4 wall plugs, rubber base, 1 CR 2032 button battery (for LED)

The European directive 2012/19/EC about electronic and electric waste, requires that you can’t throw away defective domestic appliance with common waste. Used device has to be collect separately to optimize the recuperation rate and the recycling of the materials to reduce the impact on the health and the environment.

Precision and precautions about the battery use

* Throwing away a used battery in the environment or with household waste pollutes and avoids the recuperation of reusable materials.

It is important to limit the battery consumption and to respect the following rules:

Favor alkaline battery (last longer than saline battery) and when it’s possible use rechargeable battery.
Leave used batteries and accumulators in adapted containers that you can find in some retailers. In that way, metals don’t pollute the environment and the health.
- Battery has to be inserted by respecting the polarity show on the apparel and the battery. An incorrect positioning can damage the apparel, cause leaking and even provoke fire and the explosion of the battery.
- To assure a good functioning, battery has to be in a good condition. If there is a problem, put new battery.
- Never try to recharge battery not made for this. It could leak, warm up, cause fire or explode.
- Replace all the battery at the same time. Never mix up alkaline battery with saline battery.
- Used battery has to be removed.
- Also, remove the battery if you’re not using the apparel for a long time.
- Never try to short-circuit the terminal of a battery.
- Never throw away the battery in fire because they can explode.
- Take out the accumulator from the apparel before reload it.
- We recommend that an adult watch if a child change the battery to respect those rules.
- If you swallow a battery, go immediately to your doctor or the hospital.
- For the best ongoing performance, we recommend using only fresh, high quality, alkaline batteries.