QAZQA 105090 Dong Industrial Table Lamp Instruction Manual
- June 4, 2024
- QAZQA
Table of Contents
QAZQA 105090 Dong Industrial Table Lamp
INSTRUCTION MANUAL
Dong TL 1 Bronze Black 105090
SAFETY INSTRUCTION
Please study the instruction manual and the below information carefully before installing or using this product. Please keep this user manual for further reference
-
The luminaires may only be installed by authorized end qualified technicians according to the valid regulations for electrical installation.
-
Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.
-
The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance, or repair work is undertaken.
-
Exterior lighting must not be installed during rain.
-
Take account of the minimum separation distance from other objects and the room required around the fitting.
-
If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
-
Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
-
When replacing a halogen lamp, wait for it to cool, for a minimum of 5 minutes.
-
Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
-
Take account of all available technical information.
-
Take note of the symbols when connecting wires:
N =Neutral L =Live =Earth -
Meaning of symbols:
For indoor use only, where direct contact with water is impossible
-
Protection Closs I: the fitting must be earthed
-
Protection Closs II: the fitting is doubled insulated and does not require earthing
-
Protection Closs Ill: the fitting is low voltage
-
Minimum distance from lighted objects (meters)
-
Only the self-shielded halogen lamp should be used with the luminaire
-
Strip the wire to the indicated length (mm);different items require different lengt
-
Connect using the specified coble; different items require different cable
-
The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceed; different items require different kind of light sources with different bulb icons
-
The armature is designed to work only with the indicated voltage. Different items require L.::J different working voltage.
-
The luminoire can be used in combination with o dimmer
-
The reference light angle and light space of the luminaire
-
This luminaire cannot be disposed together with normal domestic waste in standard rubbish can, but you hove to bring it to o staging area for electrical waste.
FittinQ B.V
Smarcgdweg 52, 5527 LB Ha pert, The Netherlands
www.qozqo.n
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>