Boqii PF110 F-FREE Intelligent pet feeder User Manual

Boqii PF110 F-FREE Intelligent pet feeder

Welcome

Thank you for choosing our F-FREE pet feeder This manual will guide you to fully understand and use the product to help you get the best experience with the product. We hope that our products can give your pets more meticulous care and love, and bring you a better life! If you have any questions, please feel free to contact us through customer service, official account on social media, we will provide you a satisfying solution as soon as possible.

*The manual is for reference only, the specific details shown may differ slightly from the actual product.

Usage Tips

• Please do not use this product outdoors.
• Please do not use this product in humid environment such as bathrooms.
• Please stay away from water, fire, or corrosive environment.
• Please use the l.SV DC adapter while sustaining the auto cat feeder power via alkaline D-cell batteries (not included) installed in case of power outages, ensure that your pet gets food consistently (Equipped with setting memory to prevent sudden power failure).
• Please change the batteries every 6 months if not in use for a long time.
• Please connect the 2.4GHz WiFi. The 5GHz frequency range, as well as the WiFi requiring special authentication in hotel and airport is not supported yet.
• 1n battery-powered mode, the device cannot be controlled remotely, but the feeder will work based on your appointment.
• 1f you do not use this product for a long time, please take out the battery and put it in a cool and dry place to avoid the battery expired storage, leaking liquid and corrovding shrapnel.
• 1f the lithium battery is not used for a long time, please take out the battery after fully charged and put it in a cool and dry place, and charge it at least once every 3 months to avoid over-discharge of the battery.
• To prevent electrical shock, do not plug or unplug the product with wet hands. Do not wash the base part.
• Fill in dry pet food only; kibble sized 2-l0mm / 0.07-0.4in in diameter.

Safety Precautions

• Do not disassemble and install for repair the product or its internal hardware.
• Do not manually block the blades in the hopper when the product is working, otherwise it will easily cause injury or damage to the motor.
• Do not put your fingers into the working range of the motor or the discharge port to avoid injury.
• Children should be supervised to ensure that they do not play with the feeder.
• Do not use unsuitable electrical outlets.
• Please change the batteries every 6 months if not in use for a long time.
• Please follow safety regulations when used and contact customer service if you have any problems.

Warning:

• Children should be supervised to ensure that they do not play with the feeder. Please keep safe when charging the product
• In case of any abnormal phenomenon during use, please cut off power immediately.
• The battery is to be disposed safely.
• At present, the difference between AM and PM can be distinguished according to the attached picture.

AM

| 00:00| 00:00 AM
01:00| 01:00 AM
02:00| 02:00 AM
03:00| 03:00 AM
04:00| 04:00 AM
05:00| 05:00 AM
06:00| 06:00 AM
07:00| 07:00 AM
08:00| 08:00 AM
09:00| 09:00 AM
10:00| 10:00 AM
11:00| 11:00 AM

PM

| 12:00| 12:00 PM
13:00| 01:00 PM
14:00| 02:00 PM
15:00| 03:00 PM
16:00| 04:00 PM
17:00| 05:00 PM
18:00| 06:00 PM
19:00| 07:00 PM
20:00| 08:00 PM
21:00| 09:00 PM
22:00| 10:00 PM
23:00| 11:00 PM

Product Features

Host (Bottom):

Packing List

Accessories list:

The list of accessories may vary depending on the actual model purchased, please refer to the actual product.

Setting Up

Special tips:

1. Please do not use this product in humid environment such as bathrooms.
2. Do not use it in a suspended environment such as stairs, balconies, etc., to prevent pets from pushing down the product and causing fall.
3. Do not use it directly under the sun or strong light to avoid sensor failure.
4. Please try to place the product near the router or in an area with strong WIFI signal to ensure a better connection experience.

Product lnvstallation

1. Take out the bowl base and stainless steel bowl
   Open the lid and take the accessories out of the hopper.

2. Install the battery
   Open the battery cover, and insert the 31.SV D Alkaline batteries (only 1.5 V alkaline batteries), It will automatically switch to backup power when main power supply is cut off.

3. Connect to DC power supply
   Open the battery cover at the bottom of the feeder and Plug in the power socket of feeder. Plug in the power cord to the adapter(Adapter NOT included.)

4. Install the bowl base and stainless steel bowl
   Insert the bowl base in the right direction and put the stainless steel bowl into the bowl base.

5. WiFi connection
   Scan the QR code or download the Tuya Smart or Smart Life application from the APP Store or Android application market, and connect according to the APP operation guide (only the Bluetooth version and WIFI version support APP).

6. Fill in dry pet food
   Fill in dry pet food only; kibble sized 2-l0mm / 0.07-0.4in in diameter (Do not fill too much over the recommended capacity)

Cleaning And Other Notices

1. Power off and shut down
   Remove the lid and desiccant package in sequence as shown in the figure below

2. Remove the hopper
   Hold on the hopper and contra rotate, then the upper bucket could be washed

3. Remove the distribution tray
   Turn the bottom of the hopper upwards, and remove the distribution tray by rotating it in the direction shown in the figure.

4. Cleaning
   Washable parts: Upper cover, desiccant bin, food bucket, feeding channel and bowl. *Do not wash electronic components directly.

Bowl Cleaning

1. Remove the bowl base
   Put the feeder down on the table, hold both sides of the bowl base with both hands and gently pull out in the direction shown in the figure

2. Cleaning
   Rinse the bowl base and bowl with water and dry it before installing

Key Functions

Indicator Description

Serial number| ****

Indicator light

| ****

State

| ****

Explain

| ****

Remarks

---|---|---|---|---

1

| ****

Unlocked indicator

| The white light goes out| ****

The feeder is locked.

|
The white light ison| ****

The feeder is unlocked.

|

2

| ****

WiFi indicator

| The white light flashes| ****

The equipment enters to be connected with WIFI

|
The white light

is always on

| WiFi connection OK|

3

| ****

Food jam/ Recording indicator

| The red light goes out| The feeder is normal|

Red flashing

| ****

The recording function starts

|
The red light is always on| The food is jam.|

Troubleshooting

Serial number| ****

Fault phenomenon

| ****

Fault category

| ****

Troubleshooting

| ****

Remarks

---|---|---|---|---

1

| ****

The  red light is always on

| ****

Food jam

| ****

Take out the stuck food and replace

the pet kibbles with a diameter.;; 10mm

|
2| WiFi indicator flash| WIFI| The Feeder enters to be connected

or misoperat ion may t rigger WiFi reconnection

|

3

| ****

WiFi is not connected

| ****

WIFI

| 1. WiFi only supports 2.4G. Please confirm whether the WiFi frequency band is selected correctly

2. WiFi user name or password is entered incorrectly. Please use the correct user name and password

|

4

| ****

Voice not played

| ****

Voice recording

| 1. No voice recorded

2. After the voice recording is completed, press the recording button to save and exit

3. Voice recording mode is not entered correctly to record voice

|
5| Set information No real-time display| ****

Network

| Due to network quality or delay, it can be displayed by refreshing (exit and re-enter)|

6

| ****

The food won’t come out

| ****

Feeding

| 1. Please be sure fo fill inwith dry food;kibble size should range from 2-l0mm/0.07-0.4 inches in diameter

2. Check whether any foreign objects are placed-disassemble the hopper and check the chute. Also check the food outlet.

3. Check whether it is low battery level, whether the power adapter is connected or there is any outage when no battery is installed.

|

Production Specification

Item

| ****

Speci fications / parameters

| ****

Remarks

---|---|---
Product name| F-FREE Automatic Pet Feeder|
Product model| According to the actual purchase model (see the nameplate of the host)|

Product Dimensions

| ****

l 70mm205mm335mm(without tray holder)

|

Weight

| ****

2.0 KG

|
Connection mode| Bluetooth / WiFi 2.4G connection|
Voltage| SVDC|
Power| SW|

Input power

| ****

SV lA adapter / 1.SV D battery

|
Control mode| App control + manual control|

Pairing device

1. Download app
   Scan the QR code or download app graffiti smart or smart life app from App store or Android

2. Register and log in
   Open the app, click Register, and then log in

3. Proceed with setup

   • A. Insert the DC for charging.
   • B. When the status indicator light is flashing, it means the product is pairing

4. Add device
   Click Add device or the+ sign in the upper right corner Start adding device

5. Add device
   Click “add” on the following page Then follow the provided steps to complete pairing.

6. Wifi-connection
   In the pop-up dialog box, enter the information from home. WiFi user name and password, click OK. EnterWiFi password and wait for success of connection .’For any connection failure, please repeat the operation and check if WiFi password is entered crooectly .

7. Add device
   The device enters the connect­ed state

8. Add device
   The device is added successful­ly. Click Finish to enter the operation interface

9. Add device
   The connection is successful and automatically enters the app operation interface

Device settings

• Custom naming & Sharing&Removing devices: Click the pen Icon in the upper right corner to edit the product name
• Indicator switch: The indicator light can be turned on or off.
• Factory reset: After clicking, the device will be removed and needs to be reconnected. Do not use this function if unnecessary.
• Feeding plan: Click the feeding plan and set regular grain delivery, including timings and food portion.

1. Manual feeding: Select the number of manual feeding portions, the smart feeder will automatically supplement the grain and set maximum grain delivery limit.
2. Daily record: After successful pairing, you will real-time notifications and history for your pet’s daily food intake.

FREQUENTLY ASKED QUESTIONS

What is the Boqii PF110 F-FREE Intelligent Pet Feeder?

The Boqii PF110 F-FREE Intelligent Pet Feeder is a device designed to automate the feeding process for pets, offering convenience and control over meal portions and schedules.

How does the PF110 Pet Feeder work?

The PF110 Pet Feeder dispenses pre-programmed portions of pet food at scheduled times using an electronic mechanism.

What types of pets is this feeder suitable for?

The PF110 Pet Feeder is suitable for cats and dogs of various sizes.

What are the main features of the PF110 Pet Feeder?

The PF110 Pet Feeder includes features like scheduled feeding times, portion control, voice recording, and smartphone app connectivity.

How do I schedule feeding times using the PF110?

You can use the accompanying smartphone app to set specific feeding times and portion sizes for your pet.

Can I customize portion sizes for each feeding?

Yes, you can customize the portion size for each scheduled feeding using the app.

Is the PF110 feeder voice-controlled?

Yes, the PF110 Pet Feeder allows you to record a voice message that will play during meal times to call your pet.

Does the feeder have a camera for monitoring pets?

No, the PF110 Pet Feeder does not typically come with an integrated camera.

Is the feeder Wi-Fi enabled?

Yes, the PF110 Pet Feeder is Wi-Fi enabled, allowing you to control it remotely through the smartphone app.

Can I control multiple feeders through the app?

Yes, you can control multiple PF110 feeders through the same app, if needed.

What type of food can I use with the PF110?

The PF110 Pet Feeder is designed to work with dry pet food of various shapes and sizes.

How is the food kept fresh in the feeder?

The PF110 Pet Feeder is designed to keep the food dry and fresh. It's a good practice to keep the feeder in a cool and dry location.

Is the feeder suitable for outdoor use?

The PF110 Pet Feeder is primarily designed for indoor use to protect the food from weather elements.

Is the PF110 feeder easy to clean?

The feeder's design usually allows for easy disassembly and cleaning. Check the manufacturer's instructions for proper cleaning guidance.

What power source does the PF110 feeder use?

The feeder is generally powered by an AC adapter that needs to be plugged into an electrical outlet.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK:Boqii PF110 F-FREE Intelligent pet feeder User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>