EUROtops EP714 Bluetooth Speaker Alarm Clock Instruction Manual

EP714/ A393
48922
BLUETOOTH SPEAKER ALARM CLOCK
INSTRUCTION MANUAL

PLEASE READ THE MANUAL BEFORE YOUR FIRST USE. KEEP THIS MANUAL SAFE FOR FUTURE REFERENCE!

PRODUCT DESCRIPTION

BEFORE FIRST USE, PULL OUT THE PLASTIC TAB INSIDE DE BATTERY COMPARTMENT TO REMOVE IT.

Specifications:

• 1 x lithium battery, 1400mAh, 3.7V
• Charging data: 5V/ 2A

Fig.1

1. Backlight brightness level adjustment
2. Alarm 1 (For alarm 1 or alarm 2, in alarm mode, short press to turn on/off, long press to enter alarm setting mode)
3. Alarm 2
4. Power key (long press to turn on/off the alarm clock)
5. Long press to decrease the volume/short press to switch to a previous radio station or music file
6. Long press to increase the volume/short press to switch to the next radio station or music file
7. MODE (Long press to change the mode/ PLAY or pause (short press)/ Temperature display (in clock mode, short press, and about 10 seconds later it displays 2/3 seconds)
8. Temperature icon: °C
9. Alarm 1 icon
10. Alarm 2 icon
11. TF mode icon
12. FM mode icon
13. Bluetooth mode icon (BT)e (Bluetooth)
14. TF card slot
15. USB charging port
16. Charging indicator
17. Battery compartment

BATTERY CHARGING

Before first use, fully charge – CHARGING TIME FOR FULL CHARGE: About 2H
Use the included charging cable to connect the device to a USB port of a computer or any charging device. When charging, the indicator light is red. After a full charge, it automatically turns off. Unplug the USB cable.

Notes:

• If the device has not been used for a long time, please fully recharge it before use.
• If it is not frequently used, it is recommended to charge it once a month.
• When the power is low or insufficient during use, a lower power prompt tone will be heard and the alarm clock will turn off automatically. Please recharge.

OPERATION

1. BASIC FUNCTIONS
TO TURN ON = Long press the button till the display screen turns on: the alarm clock
announces that you are in Bluetooth mode and “BT” displays.
TO TURN OFF = Long press the button till “OFF” displays and the alarm clock announces that it is powering off.
MODE BUTTON : After turning on, the alarm clock is in “BT” mode. To switch to another mode, long press the MODE button and you will get “FM” mode. Long press a second time to switch to “Clock” mode. Long press a third time to switch to Alarm mode.
Note: After a long press on the Mode button, the device will announce which mode it is.
IMPORTANT: TF mode is only functional when a TF card with MP3 or WMA music files inside is inserted. “TF” inscription displays then.

• The sequence is as follows: “BT” (Bluetooth), “Music” (TF card mode only if a TF card is inserted), “FM” (Radio), “Clock «and “Alarm”

ADJUSTING THE VOLUME: Long press the buttons or decrease or increase the volume level.
2. TIME SETTING

1. In “clock” mode (refer to the instructions in part 1. “Basic functions – Mode button”), long press till the hour digit flashes to enter the clock setting,
2. Press the buttons to adjust.
3. Press to confirm and switch to the minute setting. The minute digit flashes.
4. Press the buttons to adjust.
5. When you finish setting, long press to save the settings or wait about 6 seconds till the minute digit stops blinking.

3. ALARM SETTING

Note: The alarm is only functional in ALARM or CLOCK modes.

1. In “Alarm” mode (refer to the instructions in part 1. “Basic functions – Mode button”), press to display the time of alarm 1.
2. To enter the alarm setting off alarm 1, long press till the hour digit of alarm 1 flashes.
3. Press the buttons or adjust.
4. Press to confirm and switch to the minute setting. The minute digit flashes.
5. Press the buttons to adjust.
6. When you finish setting, long press to save the settings or wait about 6 seconds till the minute digit stops blinking. After saving the settings, alarm 1 will be automatically
turned on.
7. Double-click to select the alarm tone.
8. Press select the desired one among the five-alarm tones, and short press to save the setting.

To set alarm 2, repeat steps from 2 to 8 by using the button of alarm this time to enter the alarm setting and do the setting operations.
4. TURN ON/OFF THE ALARM CLOCK
To turn off Alarm 1 or Alarm 2, when the alarm is ringing, press . To turn on, press or in alarm mode. The related icon flashes 6/7 times, then it is still. The alarm is activated.

1. In FM mode (refer to the instructions in part 1. “Basic functions – Mode button”), short press to perform a scan. The radio will store the radio stations found during the scan and allot a number beginning with “P0..” to each of them. DO NOT press any button when scanning!
2. Once the scan is finished, the radio tunes to the displayed radio station frequency and begins to play.
3. Plug the USB cable included achieving the best reception when listening to the radio stations and/ or altering the position of the radio.
   Note: Please note if the signal is weak, the reception of the radio station may be affected and it will be poorly received.

6. BLUETOOTH CONNECTION

1. Usually, Bluetooth mode is activated after turning on the alarm clock, which announces that it is in Bluetooth mode. “BT” inscription displays, flashing. If it was on another mode, refer to the instructions in part 1. “Basic functions – Mode button”.
2. Turn on your mobile phone. Activate Bluetooth in its set menu. Find “Q3”. Pair your device with the alarm clock to connect them. When the payment is successfully done, a tone will be heard.
3. Then, play your Bluetooth device as you normally do. Music will be played from the alarm clock.
4. Press or play the previous or next music file. Press to pause or resume listening.

7. MUSIC FILE PLAYBACK (TF CARD)

• Compatible audio files: MP3 or WMA.
• Maximum capacity of TF card (not included): 32GB
• The TF card should contain at least one MP3 audio file in order to be detected by the device.

1. Insert the TF card, containing one or several music files, correctly (see the illustration on the opposite).
2. When the card is detected, the alarm clock announces that you are in music mode (“TF”), the playback automatically starts, and the allocation number of the music file displays on the screen. Then, after 3 seconds the screen will automatically return to the clock display and “TF” displays.
3. Press or play the previous or next music file. Press to pause or resume listening.

8. BACKLIGHT BRIGHTNESS ADJUSTMENT:
Use the button repeatedly to adjust the level of brightness: low, medium, and High.
9. TEMPERATURE DISPLAY
In a normal time display, press the MODE button and wait about 10 seconds for the temperature to display at ℃.

WARNINGS

• Do not use the device for anything other than its intended use.
• Keep it away from heat sources, direct sunlight, humidity, water, or other liquids.
• Disconnect it from the USB connector after the completion charge.
• Do not subject it to strong impacts and do not throw it.
• Do not operate it under high temperatures.
• Do not drop, short-circuit, modify, disassemble or puncture it.
• Handle the product with care. A blow, a shock, or a fall, even from a low height, can damage it.
• In case of abnormalities (bulge, heat, etc.) during charging, disconnect the USB connector, stop using it and take it to a qualified technician.
• All repairs should be done by a qualified technician.
• It is not a toy. Keep out of reach of children.

Safe instructions for battery
ATTENTION

• Lithium batteries can easily rupture, ignite, or explode when exposed to high temperatures, or direct sunlight.
• Do not disassemble or modify the battery. The battery contains safety and protection devices, which, if damaged, may cause the battery to generate heat, explode or ignite.
• The battery should not be removed until it is not completely discharged.
• The battery must be removed from the appliance before it is scrapped.
• Do not plug in the device after removing the battery.
• The battery must be disposed of safely.
• Batteries must not be disposed of with household waste but must be returned to battery collection points.

To remove the battery, operate according to the figures below:

Push and press the battery cover to open it.| When the lid cannot be pushed further, take it off. Remove the battery.

When putting back the lid, align the 2 extremities of the cover, slantwise, onto the corresponding slots of the battery compartment.| Then make the cover slide to close it.

Remark: Although there are 2 slots for the batteries, please note that the functions of the alarm clock can be performed with one battery. There is no need to add another one.

CLEANING AND MAINTENANCE

• DO NOT IMMERSE IN WATER OR ANY OTHER LIQUID.
• DO NOT USE ABRASIVES OR CLEANERS.
• Clean with a dry and lint-free cloth.

WARNING: You should not dispose of this device with your household waste. A selective collection system for this type of product is implemented by your local authorities. Please contact your local authorities to find out how and where collection takes place. These restrictions apply because electrical and electronic devices contain dangerous substances that have harmful effects on the environment or on human health and must be recycled.
This symbol indicates that electrical and electronic devices are collected selectively. The symbol shows a waste container crossed out with an X symbol.
Imported by EML – trading name Prodis, 1 rue de Rome 93110 Rosny-sous- Bois-France/ Made in PRC
Marketed by EUROTOPS VERSAND GMBH D-40764 LANGENFELD, Germany

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>