Laserliner SensoLite 110 Rotary Laser Receiver Instructions

Laserliner SensoLite 110 Rotary Laser Receiver

Completely read through the operating instructions, the “Warranty and Additional Information” booklet as well as the latest information under the internet link at the end of these instructions. Follow the instructions they contain. This document must be kept in a safe place and passed on together with the device.

1. All-round marking groove
2. Receiver field for laser beam
3. Magnet
4. Universal mount
5. Fastening screw for leveling staff
6. Battery compartment (rear side)
7. Switch: Precision range / Free-hand range
8. Sound ON / OFF
9. ON / OFF switch
10. Free-hand range
11. Fine range
12. Hand receiver above laser level
13. Precisely on the laser level
14. Hand receiver below laser level
15. Sound ON / OFF
16. Low battery indicator

General safety instructions

• The device must only be used in accordance with its intended purpose and within the scope of the specifications.
• The measuring tools and accessories are not toys. Keep out of reach of children.
• The structure of the device must not be modified in any way.
• Do not expose the device to mechanical stress, extreme temperatures, moisture, or significant vibration.

Safety instructions

Dealing with electromagnetic radiation

• The measuring device complies with electromagnetic compatibility regulations and limits values in accordance with EMC-Directive 2014/30/EU.
• Local operating restrictions – for example, in hospitals, aircraft, petrol stations, or in the vicinity of people with pacemakers – may apply. Electronic devices can potentially cause hazards or interference or be subject to hazards or interference.

Inserting the battery

Open the battery compartment and insert batteries according to the symbols. Be sure to pay attention to polarity.

Working with the laser receiver

Set the rotary laser to maximum speed and switch the laser receiver on. It is able to detect the laser beam at a great distance now. Move the SensoLite up and down through the laser beam until the middle indicator (13) appears. Mark the measured height at the perimeter marking groove.

The laser receiver has two tolerance settings:

• Free-hand range (10): Display with larger tolerance for rough alignment by hand.
• Precision range (11): Display with smaller tolerance for precision alignment (e.g. leveling staff).

Universal mount

The laser receiver can be installed on leveling staffs with the aid of the universal mount. The Flexi measuring staff (Art. No. 080.50 – red / 080. 51 – green) is always recommended when measuring from floor heights. It also allows you to determine heights directly without any need for calculation.

Danger – powerful magnetic fields
Powerful magnetic fields can adversely affect persons with active medical implants (e.g. pacemakers) as well as electromechanical devices (e.g. magnetic cards, mechanical clocks, precision mechanics, hard disks). With regard to the effect of powerful magnetic fields on persons, the applicable national stipulations and regulations must be complied with such as BGV B11 §14 „electromagnetic fields“ (occupational health and safety – electromagnetic fields) in the Federal Republic of Germany. To avoid interference/disruption, always keep the implant or device at a safe distance of at least 30 cm away from the magnet.

Information on maintenance and care

Clean all components with a damp cloth and do not use cleaning agents, scouring agents, or solvents. Remove the battery(ies) before storing it for longer periods. Store the device in a clean and dry place.

Technical data (Subject to technical alterations. 10.17)

Laser reception range| max. 100 m
Power supply| 2 x AAA 1.5 Volt batteries
Operating conditions| 0 … 40°C, Max. humidity 80% rH, no condensation, Max. working altitude 4000 m above sea level
Storage conditions| -10 … 70°C, Max. humidity 80% rH
Weight (incl. battery)| 0,14 kg
Dimensions (W x H x D)| 60 x 110 x 23 mm

EU directives and disposal

• This device complies with all necessary standards for the free movement of goods within the EU.
• This product is an electric device and must be collected separately for disposal according to the European Directive on waste electrical and electronic equipment.
• Further safety and supplementary notices at: http://laserliner.com/info?an=sesoli110

SensoLite 110 / SensoLite 110 G

SERVICE

• Umarex GmbH & Co. KG – Laserliner – Möhnestraße 149, 59755 Arnsberg, Germany
• Tel.: +49 2932 638-300, Fax: +49 2932 638-333
• info@laserliner.com
• Umarex GmbH & Co. KG Donnerfeld 2 59757 Arnsberg, Germany
• Tel.: +49 2932 638-300, Fax: -333
• www.laserliner.com

References

• Info - Laserliner
• Home

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>