SDC LRKWK1L Kawneer Latch Switch Kit Instruction Manual
- June 4, 2024
- SDC
Table of Contents
SDC LRKWK1L Kawneer Latch Switch Kit
INSTALLATION INSTRUCTIONS
With the head cover off remove existing screws (A). Depress pad and install switch bracket. Making sure that the tab inserts into the head assembly. Re- install screws (A) through switch bracket
Route wires cable along the side of the device. Make sure that it doesn’t interfere with the normal operation of the touch pad.
WIRING DATA
- WHT COM
- ORG N/C
- YEL N/O
- 5AMP @ 125VAC RESISTIVE
Any suggestions or comments to this instruction or product are welcome. Please contact us through our website or email engineer@sdcsecurity.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>